Here’s the page we think you wanted. See search results instead:


Contact an Expert

Technical Support

Electronic Measurement

Support by Product Model Number:

Refine the List

remove all refinements

By Industry/Technology

By Type of Content

By Product Category

1-25 of 3361

UWB Antenna Measurements with the 20 GHz E5071C ENA Network Analyzer
This app note discusses the benefits of using 20 GHz ENA network analyzers for UWB antenna measurements, and presents a measurement example using the ENA's gating function.

Application Note 2018-12-05

EMI Compliance Test vs. EMI Pre-Compliance Test - Application Brief
This paper gives you an understanding on the advantage of running an in-house EMI pre-compliance test with a spectrum analyzer, guide you through the process of making a good estimation of your new product's EMI performance, and diagnose unwanted emissions.

Application Note 2018-08-07

EMI Troubleshooting: The Need for Close Field Probes - Application Note
This application note introduces close field probes and explains how specific probes offer distinct advantages in electromagnetic compatibility (EMC) radiated emission pre-compliance test.

Application Note 2018-08-07

EMI Pre-Compliance Fundamentals - White Paper

Application Note 2018-08-07

Making Conducted and Radiated Emissions Measurements - Application Note
This application note provides an overview of radiated and conducted emissions measurements as well as a methodology for EMI precompliance testing.

Application Note 2018-08-06

How Can Distributed Architecture Help mmWave Network Analysis? - White Paper
Learn ways to increase the frequency range of VNAs to test mmWave frequencies.

Application Note 2018-08-06

Real-Time Analysis Techniques for Making Wireless Measurements - Application Note
This application note describes two major functions of a real-time spectrum analyzer and how they relate to the gap-free time capture with the PXA and MXA when used with Keysight 89600 VSA software.

Application Note 2018-08-03

Save Energy in your High-Power Test Applications - White Paper
This paper discusses on The definition of regenerative power supply and why it matters and also the operation of power supply.

Application Note 2018-08-01

Using SystemVue to Integrate a Flexible R&D Testbed for LTE
Explore how to build an integrated SystemVue model for testing LTE base station receiver measurements.

Application Note 2018-07-31

LTE-Advanced Signal Generation and Measurement Using SystemVue
Learn how to use Keysight SystemVue to generate various downlink and upload signals, use different MIMO models, and measure closed-loop throughput.

Application Note 2018-07-31

Top Considerations for 5G New Radio Device Designers - eBook
This ebook outlines challenges in 5G New Radio such as new frequency spectrum and wider bandwidths, MIMO and beam steering, over-the air testing and 5G NR coexistence with other wireless systems.

Application Note 2018-07-31

Laser Diode Characterization and Its Challenges
This white paper discusses the laser diode characterization and the challenges the test engineer faces.

Application Note 2018-07-27

How 5G Will Influence Autonomous Driving Systems - White Paper
5G Will Dramatically Strengthen Autonomous Driving Systems. ADAS and autonomous driving improve safety and save lives.

Application Note 2018-07-26

An Overview of the Electrical Validation of 10BASE-T, 100BASE-TX, and 1000BASE-T - Application Note
The technology used in these ports, commonly known as “LAN” or “NIC” ports, is usually one of the 10BASE-T, 100BASE-TX, and 1000BASE-T standards or a combination of them.

Application Note 2018-07-25

How to Make the Best Switch Mode Power Supply Measurements - Application Note
Oscilloscope power measurement options provide a quick and easy way to analyze the reliability and efficiency of switching power supplies.

Application Note 2018-07-25

Pacemaker: Narrow Pulses Generation for Design and Sensitivity Test - Article Reprint
A pacemaker is a small device that helps the heart to beat more regularly and properly. It does this with a small electric stimulation that controls the heartbeat. This paper outlines pulse generation and sensitivity test of a pacemaker. Designers require a generated signal to simulate the real pacemaker pulse signal to use for sensitivity testing of the pacemaker.

Application Note 2018-07-24

Understanding LTE-Advanced Base Station Transmitter RF Conformance Testing
Learn how to characterize LTE-A base station transmitters using the 3GPP RF conformance tests with carrier aggregation.

Application Note 2018-07-19

Overcoming Interference is Critical to Success in a Wireless IoT World - White Paper
This white paper highlights the importance of co-existence testing and step-by-step guide on how it can be done in the lab.

Application Note 2018-07-17

Wavelength and Polarization Dependence of 100G-LR4 Components - Application Note
This application note describes our solution based on the new 81606A or 81608A tunable lasers, for measuring the wavelength and polarization dependence of components for 100G optical links that multiplex multiple wavelengths. Both passive fiber optic components and receiver optical subassemblies are addressed.

Application Note 2018-07-13

Reducing the “Cost of Confidence” in Testing for NewSpace - Application Note
In this app note, we outline a cost model that applies to each stage of that lifecycle to help you reduce the “cost of confidence” in the testing of NewSpace systems and payloads

Application Note 2018-07-12

First Steps in 5G: Overcoming New Radio Device Design Challenges Series - Part 3 - White Paper
MIMO, beam steering, and beamforming are the most talked about technologies in 5G. They are essential to deliver 100x the data rates and 1000x the capacity goals specified in IMT-2020 vision.

Application Note 2018-07-10

De-Risking 5G Product Development - White Paper
Part 1 of this white paper series explores the challenges facing developers of 5G chipsets, devices, network equipment, and carrier networks.

Application Note 2018-07-09

First Steps in 5G: Overcoming New Radio Device Design Challenges Series - Part 4 - White Paper
Over-the-air (OTA) testing is one of the most challenging aspects of 5G device development. In this series, we’ve looked at many aspects of 5G for device designers, including the new 5G NR standard, flexible numerology, millimeter-wave (mmWave) design considerations, MIMO, and beamforming challenges. The combination of these technologies introduces substantial new test challenges that can only be validated with OTA testing.

Application Note 2018-07-06

Overcoming LoRa Device RF Measurement Challenges
This application note offers an introduction to some key LoRa device RF measurement challenges and offers guidance to how users can overcome these using Keysight’s test solutions.

Application Note 2018-07-04

Probing a Midpoint of a Transmission Line that is Not Load Terminated - White Paper
With the advent of variable on die termination (i.e. ODT) many systems like low power double data rate memory (LPDDR) have the ability to either terminate a line in its characteristic impedance for high speed operation or terminate it with an open for lower speed operation. Many times there is a desire to probe the transmission line to monitor the signals on the line. When the transmission line is terminated in close to its characteristic impedance, the signals can be readily observed. However, if the line is terminated in an impedance that is not close to the characteristic impedance then it may not be possible to accurately measure the signals.

Application Note 2018-07-03


1 2 3 4 5 6 7 8 9 10 ... Next