Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Technical Support

Electronic Measurement

Support by Product Model Number:

1-25 of 287

Sort:
De-Risking 5G Product Development - Part2: Techniques to Mitigate 5G Product Development Risk
This white paper discusses the design, test, and optimization techniques that reduce the risks inherent in 5G product and system development.

Case Study 2018-10-19

PDF PDF
NTT DOCOMO Gains a Go to Market Advantage in 5G with Flexible Channel Sounding
The case study outlines how NTT DOCOMO is working with Keysight to deploy its 5G mobile network by the summer of 2020.

Case Study 2018-09-25

PDF PDF
Using Simulation to Overcome 3 Millimeter Wave Design Challenges
Explore 3 simulation techniques to overcome mmWave design challenges.

Case Study 2018-09-13

PDF PDF
Full Coherent Receiver Tests Enabled At Record Speeds
Learn how Nokia Bell Labs set new world records for the fastest optical transmission enabled by Keysight's UXR-Series oscilloscope.

Case Study 2018-09-13

PDF PDF
Using Periodic Calibration of Antennas to Ensure the Ongoing Performance of Crucial Over-the-Air Systems
Understanding the role of antenna calibration for antenna performance.

Case Study 2018-09-12

PDF PDF
Everything You Need to Know About Complex Optical Modulation
A thorough review of complex optical modulation techniques.

Case Study 2018-09-10

PDF PDF
DSRC 802.11p Is Ready for Advanced Driver Assistance Systems (ADAS)
This paper explores how DRSC can be used today to help implement ADAS, and deliver on the promise of a safer and enhanced transportation experience.

Case Study 2018-08-31

PDF PDF
Five Challenges Facing Service Providers Rolling Out 5G
This white paper examines five challenges that service providers must master to ensure success in the race to 5G.

Case Study 2018-08-30

PDF PDF
Extending the Operating Life of IoT Devices with a Wireless Energy-Harvesting - Case Study
Geneva-based STMicroelectronics and French university Ecole Supérieure d’Electronique de l’Ouest (ESEO) collaborated on the development of “energy harvesting” circuits capable of transforming RF energy into DC power. STMicroelectronics and ESEO chose Keysight Advanced Design System (ADS) and its co-simulation capabilities to accurately design and simulate the rectifying circuit for the energy harvesting solution. The design team successfully created an energy-harvesting system that transformed ambient 2.45-GHz wireless signals into DC power.

Case Study 2018-08-20

PDF PDF 1.41 MB
Smart Cows and Tips for Designing Mission-Critical IoT Products
This white paper discusses the various factors that conspire to make IoT devices fail in the real world and how to address them with test.

Case Study 2018-08-09

PDF PDF
Extending the Operating Life of IoT Devices with a Wireless Energy-Harvesting Circuit
STMicroelectronics and French university ESEO extended the operating life of IoT devices by creating an “energy harvesting” circuit to transform RF energy into DC power. They used Keysight design software to create a more efficient design and minimize return loss.

Case Study 2018-07-31

PDF PDF
PCIe 5.0: The Next Generation of Peripheral Component Interconnect
This application note describes breakthrough technologies that have transformed the way systems can be tested in the field while providing higher performance, improved accuracy, capability and frequency coverage to 50 GHz

Case Study 2018-07-29

PDF PDF
Portable RADAR Testing Saves Time on the Assembly Line - Case Study
Automotive radar technology is an indispensable part of the advanced driver-assistance systems (ADAS) that not only adds convenience but helps save lives. ADAS-connected radar modules must be precisely validated on the assembly line to deliver proper operation.

Case Study 2018-07-28

PDF PDF 3.28 MB
Portable RADAR Testing Saves Time on the Assembly Line
Automotive radar technology is an indispensable part of the advanced driver-assistance systems (ADAS) that not only adds convenience but helps save lives. ADAS-connected radar modules must be precisely validated on the assembly line to deliver proper operation.

Case Study 2018-07-28

PDF PDF
Driving Down the Cost of Testing 1,500V Photovoltaic Systems
Three photovoltaic (PV) inverter OEMs saved on test equipment costs and slashed data logging and report generation time with new Keysight PV design and test solution.

Case Study 2018-07-27

PDF PDF
How 5G Will Influence Autonomous Driving Systems
Learn how emerging 5G cellular communications solutions address the limitations of DSRC and 4G-cellular LTE to enable advanced driver assistance systems (ADAS).

Case Study 2018-07-26

PDF PDF
Understanding and Testing the 5G Ecosystem
Follow the leaders on technology, tools, and techniques needed to understand and test the 5G ecosystem.

Case Study 2018-07-23

PDF PDF
Thunderbolt 3 How to Test and Troubleshoot
Thunderbolt is a hardware interface that supports several protocols through the USB-Type C connector. See how to test and troubleshoot this developing standard.

Case Study 2018-07-23

PDF PDF
Manufacturer of Automotive DC-DC Converters Slashes Test Time by 95 Percent
DC-DC converter OEM reduced test time by 95% and boosted throughput by 4x with automated and continuous testing of multiple parameters for each converter.

Case Study 2018-07-17

PDF PDF
DC-DC Converter Testing - Case Study
Manufacturer of automotive DC-DC converters slashes test time by 95 percent.

Case Study 2018-07-17

PDF PDF 4.49 MB
Overcoming Interference is Critical to Success in a Wireless IoT World
This white paper highlights challenges of coexistence of IoT devices and steps to design coexistence tests.

Case Study 2018-07-09

PDF PDF
De-Risking 5G Product Development
Part 1 of this white paper series explores the challenges facing developers of 5G chipsets, devices, network equipment, and carrier networks.

Case Study 2018-07-09

PDF PDF
DDR Memory Test Challenges from DDR3 to DDR4 and DDR5
This whitepaper will discuss the progression of the technology, how tests have had to evolve accordingly, the test equipment that can help combat challenges presented by current and future generations of DDR.

Case Study 2018-07-06

PDF PDF
Validating the New World of 400 Gigabit Ethernet
Hyperscale data centers and service providers are now looking to deploy new Ethernet speeds like the fast-emerging 400GE and 200GE, plus new implementations of 100GE and 50GE. This white paper explains why this is a critical time to renew efforts to compare and benchmark the performance of network products and devices.

Case Study 2018-07-05

Completing Li-Ion Cell Self-Discharge Testing in Just Two Hour - Case Study
Leading Lithium-Ion cell manufacturer dramatically reduces overall battery test time and improves product quality assurance with innovative self-discharge tests from design to manufacturing.

Case Study 2018-07-04

PDF PDF 3.61 MB

1 2 3 4 5 6 7 8 9 10 ... Next