Вы искали эту информацию? Посмотреть другие результаты поиска:

 

Связаться с экспертом

Техническая поддержка

Электронные измерения

Поддержка по номеру модели:

1-25 из 147

Упорядочить:
Improve Measurement Integrity for RF and Microwave Wideband Signal Generation - White Paper
Discuss the impacts of frequency responses and modulator imperfections on wide bandwidth signals, and how to improve measurement integrity for these impacts.

Руководство по применению 2019-10-03

PDF PDF 5.59 MB
3 Steps to Characterize RF Devices with Stimulus-Response Measurements - White Paper
Perform stimulus-response tests, such as CCDF, harmonics, TOI, ACP, and EVM to understand the performance of the DUT under different conditions to determine the best trade-offs in your design.

Руководство по применению 2019-09-20

PDF PDF 3.54 MB
Navigate the Complexity of IoT RF Receiver Testing - White Paper
This white paper provides an overview of the major IoT wireless standards, common IoT RF receiver test cases, and tips for accurate receiver measurements.

Руководство по применению 2019-07-25

Overcoming LoRa Device RF Measurement Challenges - Application Note
This Application Note offers an introduction to some key LoRa device RF measurement challenges and offers guidance to how users can overcome these using Keysight’s test solutions.

Руководство по применению 2019-07-01

The Essential Signal Generator Guide – Building a Solid Foundation in RF – Part 1 - White Paper
In this first part of our two-part white paper series on signal generators, we help you gain a sound understanding regarding the fundamental specifications of signal generators.

Руководство по применению 2019-06-28

How to Minimize Measurement Uncertainty in RF Signal Generators - Application Note
This app note will help you minimize measurement uncertainty attributed to test stimuli in a test system and to know what the measurement uncertainties are and how to minimize them.

Руководство по применению 2019-05-21

Tips for Preventing Damage to Signal Generators - Technical Overview
Tips for Preventing Damage to Signal Generators, Models N518xB,N519xA, E82x7D

Руководство по применению 2019-02-21

4 Tips for 5G New Radio Signal Creation - Accelerate Design Validation for 5G NR - White Paper
New technologies that include 5G NR will require you to think differently about how you design and test devices. Here are 4 tips to help you successfully generate 5G NR test signals and get your designs to market faster.

Руководство по применению 2019-02-04

Designing and Testing 3GPP W-CDMA Base Stations (Including Femtocells) - Application Note
W-CDMA is one of several wideband digital cellular technologies competing for the third-generation (3G) cellular market.

Руководство по применению 2019-01-30

Accelerate 5G Testing: 5G Manufacturing Test Considerations - White Paper
The promise of 5G is faster and more reliable communications. To enable mobile broadband communications, 5G uses existing and new technologies to achieve extreme data throughputs. In this white paper, you will learn about the impact of the 3GPP evolution on your testing and solutions available to help you scale to production quickly.

Руководство по применению 2019-01-29

PDF PDF 2.80 MB
提高振幅準確度,就用下一代信號產生器
如果您須使用信號產生器執行量測,本白皮書可協助您提高振幅準確度。

Руководство по применению 2018-12-02

Improving Amplitude Accuracy with Next-Generation Signal Generators - White Paper
This whitepaper will help you improve the amplitude accuracy of your measurements that involve signal generators.

Руководство по применению 2018-11-02

PDF PDF 2.44 MB
Making Noise in RF Receivers - White Paper
In this white paper, you will learn what the AWGN and phase noise are and how to correctly and accurately apply the noise to your desired signal for receiver performance test.

Руководство по применению 2018-10-30

Understanding and Testing Multi-Channel RF Systems with Signal Generators Part 2
Generating and analyzing multiple synchronized RF signals are potentially challenging. This white paper discusses test signal requirements for the evaluation of multi-channel RF systems and how to configure instruments for these test requirements.

Руководство по применению 2018-10-22

Understanding and Testing Multi-Channel RF Systems with Signal Generators Part 1
Generating and analyzing multiple synchronized RF signals are potentially challenging. This white paper discusses test signal requirements for the evaluation of multi-channel RF systems and how to configure instruments for these test requirements.

Руководство по применению 2018-10-22

9 Best Practices for Optimizing Your Signal Generator – Part 2 - Application Note
Knowing the capabilities and performance of your signal generators is the first step to make accurate and consistent measurements. In this two-part Application Note, we discuss the best practices to optimize your signal generator.

Руководство по применению 2018-10-19

9 Best Practices for Optimizing Your Signal Generator – Part 1 - Application Note
Knowing the capabilities and performance of your signal generators is the first step to make accurate and consistent measurements. In this two-part Application Note, we discuss the best practices to optimize your signal generator.

Руководство по применению 2018-10-18

Tactics for Improving Distortion Measurements - White Paper
Learn about the different types of distortion and why they matter to your RF measurements.

Руководство по применению 2018-10-05

Overcoming Interference is Critical to Success in a Wireless IoT World - White Paper
This white paper highlights the importance of co-existence testing and step-by-step guide on how it can be done in the lab.

Руководство по применению 2018-07-17

Creating Multi-Emitter Scenarios for Radar and Electronic Warfare (EW) Testing - Application Note
Part 8 of the Radar App Note series focuses on multi-emitter testing of radar and electronic warfare (EW) systems. Realistic testing of these systems depends on the generation of signals that accurately simulate multi-emitter environments consisting of thousands of emitters and millions of pulses per second, all arriving from multiple directions. New technology built into commercial, off-the-shelf signal generators enables developers to generate increasingly complex simulations that get closer to reality and provide deeper confidence in EW system performance.

Руководство по применению 2018-05-31

PDF PDF 1.92 MB
A Flexible Test Solution for 2.4 GHz ZigBee Transmitter and Receivers - Application Note
This application note explains a low cost measurement solution for 2.4 GHz ZigBee O-QPSK signal generation for receiver test and signal analysis for transmitter test

Руководство по применению 2018-04-03

Understanding GSM/EDGE Transmitter and Receiver Measurements for Base Transceiver Stations (AN 1312)
This 36-page application note presents the fundamental RF parametric measurements necessary to characterize GSM/EDGE base transceiver stations and their components.

Руководство по применению 2018-03-12

Optimizing Dynamic Range for Distortion Measurements - Application Note
This application note covers high dynamic range measurement techniques for the new PSA Performance Spectrum Analyzer Series. The note describes the best way to use the PSA series to make distortion measurements such as ACP, intermodulation, and harmonic distortion.

Руководство по применению 2018-03-12

PDF PDF 2.11 MB
BER and Subjective Evaluation for DVB-T/H Receiver Test - Application Note
This AN tells how use N7623B Signal Studio for digital video with signal generators for standard-compliant digital video receiver and component test. Test cases are given for DVB-T/H receivers.

Руководство по применению 2018-02-16

PDF PDF 6.25 MB
Receiver Test: Overcoming Five Fundamental Challenges - Application Note
Learn how to address five fundamental challenges in the development of wireless receivers.

Руководство по применению 2018-02-02

PDF PDF 1.76 MB

1 2 3 4 5 6 Следующие