Вы искали эту информацию? Посмотреть другие результаты поиска:


Связаться с экспертом

Техническая поддержка

Электронные измерения

Поддержка по номеру модели:

1-25 из 497

Using Vector Modulation Analysis to Analyze Complex Signals - Application Note
To address your dynamic measurement needs, Keysight offers dedicated signal analysis applications for 5G NR, LTE-Advanced Pro (including NB-IoT/eMTC), WLAN 802.11ax along with general-purpose measurement applications for analysis of both standards-based signals and customized propriety signals.

Руководство по применению 2020-07-02

TDECQ Part II, Manufacturing Test Recommendations - White Paper
This document gives an overview of the adoption of TDECQ in manufacturing tests, and how to efficiently automate FlexDCA for making TDECQ measurements.

Руководство по применению 2020-07-02

Latency in Automotive Ethernet Switches
Automotive Ethernet systems rely on speed and timing. Knowing the latency of the overall network is critical. See how to utilize Keysight protocol decode and triggering application to measure the latency in your switch

Руководство по применению 2020-06-18

Multiport and Multi-site Test Optimization Techniques - Application Note
This app note gives an overview of multiport and multi-site test capabilities, how different multiport test solutions compare, and what should be considered when configuring a multi-site test station.

Руководство по применению 2020-03-24

Network Analyzer Measurements: Filter and Amplifier Examples
The network analyzer is used for a variety of device and component characterization tasks in both laboratory and production environments.

Руководство по применению 2020-03-19

Automotive Ethernet: Enabling the Future of Autonomous Driving
Autonomous vehicles and advanced driver assistance systems (ADAS) need higher bandwidth and lower latency. Automotive Ethernet is the new backbone for faster onboard networking.

Руководство по применению 2020-03-12

Noise Figure Measurement Accuracy - The Y-Factor Method - Application Note
Specific to instruments that use the Y-factor method for noise figure measurements, this app note discusses measurement basics, avoidable errors, loss and temperature corrections, and uncertainties.

Руководство по применению 2020-03-02

Designing for DDR4 and Beyond
As memory designers adapt to the added complexity that DDR4 and DDR5 memory brings, it’s imperative that they employ the right simulation-based design and analysis workflow solution.

Руководство по применению 2020-01-26

Create Accurate EVM Measurements with the PNA-X Series Network Analyzer
In this application note, you will learn an innovative method for characterizing nonlinearity of the power amplifier under modulated stimulus condition.

Руководство по применению 2020-01-20

Overcoming LoRa Device RF Measurement Challenges
This application note offers an introduction to some key LoRa device RF measurement challenges and offers guidance to how users can overcome these using Keysight’s test solutions.

Руководство по применению 2019-12-01

Characterizing Hi-Speed USB 2.0 Serial Buses In Embedded Designs - Application Note
Learn about probing the hi-speed USB 2.0 serial bus and see some unique debugging tools and capabilities that can help you get your embedded designs to market faster.

Руководство по применению 2019-11-26

Optimize Power Distribution Networks for Flat Impedance
Too many designers leverage a previous design or a data sheet example and wait until measurement to debug. That is a risky and expensive way to design. A better approach is to start with pre-layout to explore the right design space before going to layout and optimization.

Руководство по применению 2019-11-11

Improving Analysis Accuracy in Power Circuit Simulation
Case Study TDK Corporation

Руководство по применению 2019-11-11

High-Speed Digital Design Success Demands a Modern Workflow
A simulation and measurement-based workflow enables Power Integrity engineers to design resonant-free power delivery and avoid rogue voltage waves.

Руководство по применению 2019-11-08

Investigate Interference Issues in the Field with RTSA - White Paper
Interference is everywhere — and traditional analysis isn’t reliable. This white paper discusses interference sources, the flaws of traditional analysis, and how RTSA aids interference detection.

Руководство по применению 2019-11-06

Infiniium Oscilloscopes with 89600 VSA Software - Application Note
This application note describes the characteristics, setup, and operation of an Infiniium Series oscilloscope with 89600B vector signal analysis software to provide broadband vector signal analysis.

Руководство по применению 2019-10-28

Address Phase Compensation Challenge in 5GNR Signal Generation - Application Note
This is the application note for addressing phase compensation challenge in 5G NR.

Руководство по применению 2019-10-22

Numerical Simulation of a Bipolar-Sequence TMA System
Numerical modeling of an 8-element bipolar time-modulated array (BTMA) system composed of microstrip patches and designed for operating at 5-GHz.

Руководство по применению 2019-10-22

Address Phase Compensation Challenge in 5GNR Signal Generation
This is the application note for addressing phase compensation challenge in 5G NR.

Руководство по применению 2019-10-21

Simulating High-Speed Serial Channels with IBIS-AMI Models
This paper reviews some of the benefits and limitations of using IBIS models and introduces the new AMI extensions to the latest IBIS version 5.0 specification.

Руководство по применению 2019-10-09

Automotive Serial Bus Testing Using Oscilloscopes - White Paper
Learn how to use oscilloscopes to characterize the performance of your automotive buses including CAN, CAN FD, LIN, FlexRay, and SENT.

Руководство по применению 2019-10-04

InfiniiVision Oscilloscopes with 89600 VSA Software - Application Note
This application note describes the characteristics, setup, and operation of a broadband VSA comprised of a Keysight InfiniiVision oscilloscope and the 89600 VSA software.

Руководство по применению 2019-09-26

10 Hints for Making Successful Noise Figure Measurements - Application Note
This document will help minimize the uncertainties in your noise figure measurements. Key topics include minimizing extraneous signals, mismatch uncertainties, nonlinearities, and path losses.

Руководство по применению 2019-09-25

Evaluating Oscilloscopes to Debug Mixed-Signal Designs - Application Note
Discusses the number of channels, bandwidth, sample rates and triggering required to effectively monitor various analog and digital I/O signals in typical MCU/DSP-based embedded designs.

Руководство по применению 2019-09-17

Testing Dual-band GPS Receiver with Signal Studio
This application note describes testing a dual-band GPS receiver with Signal Studio.

Руководство по применению 2019-09-05


1 2 3 4 5 6 7 8 9 10 ... Следующие