Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Technical Support

Electronic Measurement

Support by Product Model Number:

1-25 of 47

Sort:
Making Conducted and Radiated Emissions Measurements - Application Note
This application note provides an overview of radiated and conducted emissions measurements as well as a methodology for EMI precompliance testing.

Application Note 2019-03-08

EMI Compliance Test vs. EMI Pre-Compliance Test - Application Brief
This paper gives you an understanding on the advantage of running an in-house EMI pre-compliance test with a spectrum analyzer, guide you through the process of making a good estimation of your new product's EMI performance, and diagnose unwanted emissions.

Application Note 2018-08-07

Testing Automotive DC-DC converter with Keysight TS-8989 - Application Note
This paper discusses emulation of input signals, load simulations and measurements for testing high-power automotive DC-DC converter electronic control units and the TS-8989 functional tester.

Application Note 2018-04-12

PDF PDF 781 KB
How to Shorten Li-Ion Self-Discharge Test Time? - White Paper
High levels of Li-Ion cell self-discharge are indicative of latent failures. The new potentiostatic solution from Keysight addresses cell self-discharge measurement challenges with revolutionary reduction in time, save cost and accelerate time-to-market.

Application Note 2018-01-26

Drive Connected, Drive Safe - White Paper
A well-tested eCall/ERA-Glonass system meeting compliance standards at development phase can go on to help save lives and minimize injury aftermath in the event of accidents when cars hit the roads.

Application Note 2017-12-13

PDF PDF 2.33 MB
TS-8989 System Integration Guide - Application Note
In today’s manufacturing environment, floor space is an increasingly invaluable variable in the cost of test equation.

Application Note 2017-12-12

PDF PDF 2.69 MB
Measure Lithium Ion Self-Discharge of Cells in a Fraction of the Time Traditionally Required
This new way to determine a cell’s self-discharge by measuring its self-discharge current allows cells with excessively high self-discharge to be identified and isolated much quicker vs traditional open-circuit voltage approaches.

Application Note 2017-12-08

UWB Antenna Measurements with the 20 GHz E5071C - Application Note
This application note describes benefits of measuring UWB antennas with the E5071C 20 GHz option and introduces measurement tips for using the gating feature with the E5071C.

Application Note 2017-12-05

x1149 Boundary Scan Solution for Blade Server Board - Application Note
This application note describes in detail what the Keysight x1149 Boundary Scan Analyzer performs during the Integrity test.

Application Note 2017-12-01

PDF PDF 6.16 MB
Quickly Validate Designs for DOCSIS 3.1 Compliance - Application Brief
This “DOCSIS 3.1 Test Solution" app brief gives insight into Keysight solutions that can be used for testing DOCSIS 3.1 transmitters, receivers and components.

Application Note 2017-12-01

Boundary Scan DFT Guidelines for Good Chain Integrity and Test Coverage - Application Note
This application note provides some key guidelines to enable good design for testability using boundary scan.

Application Note 2017-07-31

Automotive FMCW Radar System Design using 3D Framework for Scenario Modeling
Automotive Radar Architects can take advantage of Keysight SystemVue’s 3D simulation framework, radar reference designs, and links to MATLAB and T&M equipment to model FMCW radar system scenarios.

Application Note 2017-03-28

Understanding x1149 Integrity Test - Application Note
This application note describes in detail what the Keysight x1149 Boundary Scan Analyzer performs during the Integrity test.

Application Note 2017-02-16

PDF PDF 2.48 MB
Programming with the N937xA PXIe Vector Network Analyzers - Application Note
This application note discusses the process of developing a C# application using an IVI driver as the programming remote driver for the M937xA PXIe vector network analyzer.

Application Note 2015-07-07

PDF PDF 4.75 MB
Testing Automotive Electronic Parking Brake Controls with the TS-8989 - Application Note
This application note discusses the configuration of a typical Keysight TS-8989 PXI Functional Test System for testing automotive electronic parking brake controls.

Application Note 2015-05-11

Detecting Tailgating Boards on the i3070 Inline In-Circuit Tester - Application Note
Tailgating sensor improvements on the Keysight i3070 Series 5i inline in-circuit tester help to further minimize damages due to operator and upstream loading errors.

Application Note 2015-01-05

PDF PDF 437 KB
Non-Contact Measurement Method for 13.56 MHz RFID Tags – Application Note
For engineers working in RFID antenna design and test, this note discusses a non-contact method for measuring resonant frequencies of RFIDs using a network analyzer.

Application Note 2014-12-05

PDF PDF 607 KB
Modifying DDR Libraries for Silicon Nail Test Generation on the Keysight x1149 Boundary Scan Analyzer
This application note describes how to modify DDR libraries to generate silicon nails tests on the Keysight x1149 Boundary Scan Analyzer.

Application Note 2014-08-03

PDF PDF 1.57 MB
Testing Automotive Fuse Boxes with i1000D SFP In-Circuit Test System - Application Note
The i1000D small footprint in-circuit tester provides excellent test coverage for automotive fuse boxes, which contain vital connections to a vehicle's various electrical systems.

Application Note 2014-03-26

Testplan Development on CVI Labwindows with TS-5400 PXI Series - Application Note
This application note provides set-up guidelines to start developing your testplan on CVI Labwindows using the Keysight U8972A TS-5400 PXI Series functional test system.

Application Note 2014-03-25

Considerations in Making Small Signal Measurements - Application Brief
The increasing demand for battery-powered mobile devices and energy-efficient green products has triggered a rising demand for a scope measurement solution that can measure the small signals.

Application Note 2013-10-29

Make High Sensitivity, Wide Dynamic Range Current Measurement - Application Note
The new N2820A Series high-sensitivity current probes from Keysight Technologies address the need for high-sensitivity current measurements with a wide dynamic range.

Application Note 2013-02-26

Impedance and Network Analysis Application List Application Note
This document provides the information of unique and new solutions for impedance and network analysis with using Keysight impedance analyzers, LCR meters and ENA series network analyzers.

Application Note 2012-10-30

Using a Network and Impedance Analyzer to Evaluate 13.56 MHz RFID Tags and Readers/Writers
For engineers who work in RFID antenna design and test, this note discusses testing RFID antenna characteristics such as impedance and resonant-frequency with network and impedance analyzers.

Application Note 2012-02-08

Reducing Measurement Times in Antenna and RCS Applications
To help you achieve these speed improvements, this note describes test range configurations and typical measurement scenarios.

Application Note 2010-12-20

PDF PDF 3.15 MB

1 2 Next