Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Technical Support

Electronic Measurement

Support by Product Model Number:

Refine the List

By Industry/Technology

By Type of Content

By Product Category

126-150 of 1189

Sort:
High Speed Digital Design Seminar: New features and capabilities of ADS 2019 U1 for DDR and SerDes
High Speed Digital Design Seminar: New features and capabilities of ADS 2019 Update 1 for DDR and SerDes

Seminar Materials 2019-04-10

Keysight EEsof EDA Customer Education and Services
Brief overview of Keysight EDA Customer Education and Services.

Training Materials 2019-04-06

Go Green: Reduce Your Product's Power Consumption
Wireless transmissions are often the biggest single consumer of battery charge. Learn how to extend the battery life by optimizing the trade-off between download power and packet error rate.

Webcast 2019-04-05

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013079&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013079&CC=US&LC=ENG
Redefining Drive Test for 5G
5G NR deployments in 3.5 GHz and 28–29 GHz frequency ranges change testing, impacting drive test coverage measurements and QoE assessments. Learn about 5G NR field measurement and drive test that can be used to optimize 5G QoE.

Webcast 2019-04-04

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013083&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013083&CC=US&LC=ENG
High-Speed Oscilloscope Fundamentals
This section will focus on becoming familiarized with oscilloscopes and probing technology from the ground up. Topics will cover sampling rates, bandwidth and aliasing, triggering, waveform visualization tools, waveform update rate, and probing tips and tricks.

Seminar Materials 2019-04-03

PDF PDF 2.99 MB
Signal Integrity Measurements and Network Analysis
This section will briefly touch on transmission line fundamentals and then focus on practical ways to troubleshoot and improve physical layer components inside the internet infrastructure. Topics will include differential s-parameters, how mode conversion relates to crosstalk, practical de-embedding methods to increase accuracy and finally a backplane design case study demonstration using a multiport VNA.

Seminar Materials 2019-04-03

PDF PDF 5.45 MB
Fundamentals of Bit Error Ratio Testing
This section covers receiver testing using a Bit Error Ratio Tester (BERT), the typical applications to use a BERT, and what are the key specification to take into consideration when configuring one. In addition, we will be covering the test setup, how to run a typical receiver test, and how the data test pattern is stressed.

Seminar Materials 2019-04-03

PDF PDF 1.51 MB
Fundamentals of Arbitrary Waveform Generation
This section gives an overview of the use and importance of an Arbitrary Waveform Generator and how to make sure you have the right Sampling Rate and Memory depth to meet your measurement needs when choosing an AWG. Topics will include key specifications of Arbitrary Waveform Generation, the importance of considering filtering and sampling rate, overview about generating signal impairments and customization of your signal with an AWG.

Seminar Materials 2019-04-03

PDF PDF 4.05 MB
400G: Looking Forward to 800G
Most of the work on the '400G Class' Standards is complete, and new projects are starting to define the electrical links that will enable the next '800G Class' of optical and electrical standards. The low margins we see today will be even smaller or non-existent in the next generation. Verifying compliance for 400G requires careful attention to test setup and execution and will likely require even more discipline moving forward. This session will cover practical techniques to minimize some of the problem areas users are experiencing today in validating compliance in 400G links, and what challenges we may see as the '800G Class' Standards begins to take shape.

Seminar Materials 2019-04-02

PDF PDF 1.87 MB
Terabit Communication Research with Coherent Optical Modulation Tools
If you plan to use coherent modulation for higher bit rates, this presentation introduces you to the basic concepts of coherent signal measurements, new advanced tools, and provides examples of measurements.

Seminar Materials 2019-04-02

PDF PDF 2.67 MB
PCI Express 5.0: Full Speed Ahead! Phy Layer Testing Challenges at 32GT/s
In this presentation, you'll learn not only what's new with the PCIe 5.0 standard but also what to look for as you evaluate tools to help you validate your transmitter and receiver circuits.

Seminar Materials 2019-04-02

PDF PDF 2.09 MB
Get Your Game On for Next Generation DRAM: DDR5 and LPDDR5
This presentation will show you how to get your game on so you can master a whole new generation of DRAM.

Seminar Materials 2019-04-02

PDF PDF 1.20 MB
TDECQ for PAM4 Optical Transmitters: Does it Really Work?
The use of PAM4 and forward error correction led to dramatic changes in the test methods used to characterize optical transmitters used in digital communications systems. TDECQ (transmitter dispersion and eye closure quaternary) is the primary example of this change. Does the measurement really provide the results it was intended to yield, specifically the power penalty metric needed to predict how well a transmitter will operate in a real system? This paper will try to document when it does and when it does not.

Seminar Materials 2019-04-02

PDF PDF 2.38 MB
A Practical Guide to Signal Integrity: From Simulation to Measurement
If you are new to signal integrity, this presentation will give you a head start on your journey, including complimentary example files for continuing your learning. For experienced SI engineers, this presentation is an excellent refresher on the fundamental SI analyses and concepts in both simulation and measurement.

Seminar Materials 2019-04-02

PDF PDF 3.89 MB
9 Best Practices for Optimizing Your Signal Generator
Watch “9 Best Practices for Optimizing Your Signal Generator” to learn how to make accurate and consistent measurements to optimize your signal generator’s performance for a variety of test applications.

Webcast 2019-03-28

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013074&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013074&CC=US&LC=ENG
Get More Out of Your Instruments with FPGAs
Learn how to easily program FPGAs to experiment with new protocols or envelope tracking values, customize Doppler, delay functions, accelerate a CPU intensive test, and more.

Webcast 2019-03-28

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013072&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013072&CC=US&LC=ENG
Accelerating Test Automation Development
Test engineers are under constant pressure to reduce the total cost of test, and at the same time, get products through testing faster. Learn steps that will accelerate your test workflow.

Webcast 2019-03-28

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013072&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013072&CC=US&LC=ENG
Addressing FEC Challenges on Your 400G Device
Forward error correction (FEC) is a necessity in the 400G world but introduces new test challenges. In this webcast, you will discover tools for debugging and solving your FEC test challenges.

Webcast 2019-03-28

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013087&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013087&CC=US&LC=ENG
IoT Insights Using an Oscilloscope
As the internet of things (IoT) continues to grow, so does the demand for accuracy in devices. In this webinar, you will learn about common IoT test challenges and how your benchtop oscilloscope can address them.

Webcast 2019-03-28

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013079&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013079&CC=US&LC=ENG
Capture Elusive Glitches
Learn what it takes to capture and analyze elusive glitches as well as measurement techniques to help ensure a successful design.

Webcast 2019-03-01

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013076&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013076&CC=US&LC=ENG
Power Converter Test Challenges in HEV/EV
Learn about interoperability as part of the solution as coherent optical data transmission expands from low-volume niche applications to high-volume applications.

Webcast 2019-03-01

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013092&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013092&CC=US&LC=ENG
Optimize Signal Integrity on Hyperscale Network Interconnects
Learn more about tools and methods to manage challenging signal integrity issues such as crosstalk, mode conversion, eye closure, insertion loss, and multiple reflections inside the copper channel.

Webcast 2019-03-01

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013087&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013087&CC=US&LC=ENG
Understanding X-Parameters
This three-day, hands-on course presents the fundamentals of X-parameters, their application for non-linear amplifiers and advantanges over other behavioral modeling techniques.

Classroom Training

Test Challenges of DSRC and DSRC CoC Certification Test Solution for V2X Era
Review measurement requirements and test challenges to comply with Dedicated Short-Range Communications of V2X technology and the latest updates in DSRC certification test.

Webcast 2019-03-01

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013092&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013092&CC=US&LC=ENG
Addressing Interoperable Coherent Transceiver Test Challenges
As coherent optical data transmission expands from low-volume niche applications to high-volume applications, this webinar explores interoperability as part of the solution.

Webcast 2019-03-01

JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013087&CC=US&LC=ENG JSPX?ACTION=REF&CNAME=EDITORIAL&CKEY=3013087&CC=US&LC=ENG

Previous 1 2 3 4 5 6 7 8 9 10 ... Next