Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Technical Support

Electronic Measurement

Support by Product Model Number:

1-25 of 247

Sort:
Keysight PXIe Chassis Cooling Guidelines - White Paper
Module temperatures in a PXI system can impact operating conditions. It’s important to actively manage the environment inside your chassis.

Application Note 2019-06-26

PDF PDF 702 KB
Mastering 5G Manufacturing - White Paper
Device manufacturers and NEMs must surmount the challenges from 5G NR, MIMO, and mmWave frequencies. They must shift their focus from test case coverage to cost of test and time to market.

Application Note 2019-05-31

PDF PDF 4.82 MB
Portable Multichannel/Multi-Module Streaming/Recording Solutions Using M9203A and PXIe RAID Storage
This application note explains how to construct a portable M9203A streaming solution, and suggests configurations that maximize streaming/recording performance for up to 8 channels.

Application Note 2019-05-31

Conquer IoT Test Challenges for ZigBee IoT Products
This paper discusses common difficulties in manufacturing test of Wireless IoT devices and how the Keysight ZA0060A solves them inexpensively.

Application Note 2019-04-25

PDF PDF 711 KB
Signal Integrity Analysis Series Part 1: Single-Port TDR, TDR/TDT, and 2-Port TDR - Application Note
This Application Note focuses on part 1: those which use a single-port TDR, those which use TDR/TDT, and those which use 2-port TDR.

Application Note 2019-04-25

M9336A Multi-Module Waveform Synchronization - White Paper
This white paper describes how synchronize up to eight M9336A AWG PXIe modules for the generation of phase-coherent signals.

Application Note 2019-03-26

PDF PDF 1.77 MB
Everything You Need to Know About Coherent Optical Modulation - Application Compendium
This is an introduction to the fundamentals of coherent optical modulation techniques.

Application Note 2019-03-25

PDF PDF 12.70 MB
Power Handling Capability of Electromechanical Switches
This application note discusses the power handling of the hot switching and cold switching of EM switches.

Application Note 2019-02-13

Accelerate 5G Testing: 5G Manufacturing Test Considerations - White Paper
The promise of 5G is faster and more reliable communications. To enable mobile broadband communications, 5G uses existing and new technologies to achieve extreme data throughputs. In this white paper, you will learn about the impact of the 3GPP evolution on your testing and solutions available to help you scale to production quickly.

Application Note 2019-01-29

PDF PDF 2.80 MB
Comparisons: DAQ970A to 34970A and 34972A Data Acquisition System - White Paper
This paper provides a comparison of the next generation DAQ970A and, the 34970A/34972A Data Acquisition Systems.

Application Note 2018-10-30

Fast Thermal Characterization and Testing Your Electronic Devices - White Paper
Fast thermal characterization and testing gives you the advantage of quick and qualitative insight into your products’ characteristics, the ability to troubleshoot and fine-tune the performance, and the capability to perform additional iterative testing. Learn how to predict and preview operating temperature performance of your product. Learn how to use a DAQ data acquisition system as a data logger to make temperature measurements on your product.

Application Note 2018-09-21

Pulse, Pattern, Function, and Arbitrary Waveform Generators - Application Note
This Keysight family of pulse, pattern, function and arbitrary waveform generators can help you verify and characterize digital or analog systems, products, and components.

Application Note 2018-09-17

PDF PDF 2.06 MB
Keysight PXIe Chassis Fan Control Tool
Download this zipped folder containing the Fan Control Tool. The Fan Control Tool is a command line executable that controls the fan speed in a Keysight PXIe chassis. For many applications, the default chassis fan speed provides more cooling than required at the extra cost of fan noise. By changing the configuration from the default, you can significantly reduce fan noise. Use the Fan Control Tool to monitor the chassis temperatures and fan speeds to determine a balance of fan noise and cooling performance. After finding the appropriate setting, you can set the controller to run this tool and apply your setting every time the device boots up. Documentation and source code included.

Analysis Tool 2018-09-05

ZIP ZIP 15.98 MB
Temperature Data Logging: Making the right choice with a Data Acquisition System - White Paper
Consider using a DAQ as a temperature data logger due to its flexibility to make multiple temperature measurements, choice of sensor types with high accuracy, the ability to measure other signal types, easy to configure and automate testing without programming.

Application Note 2018-08-29

Make Better AC RMS Measurements with Your Digital Multimeter - Application Note
Learn about the complexity of ac rms measurements and how to deal with them

Application Note 2018-08-17

Error Analysis of PAM4 Signals - Application Brief
Increasing demands for a connected world with instant data access continues to drive Ethernet, 64G fiber channel, CEI-56G and other next generation data center networking links.

Application Note 2018-08-17

Accurately measure path loss for over the air transmitter and receiver measurements
This application note describes how to improve the accuracy of the Keysight X8711A by properly measuring path loss and applying the right system offset in the test plan.

Application Note 2018-08-16

PDF PDF 981 KB
4 Things to Consider When Using a DAQ as a Data Logger
Product designs keep increasing in complexity. So do product test requirements. Learn how to improve test development cycle time, choose the right setup to optimize your test time, and improve the accuracy of your data acquisition test system.

Application Note 2018-08-07

PCIe 5.0 The Next Generation of Peripheral Component Interconnect - White Paper
Defining the Next Standard in Interconnect Technology

Application Note 2018-07-30

How 5G Will Influence Autonomous Driving Systems - White Paper
5G Will Dramatically Strengthen Autonomous Driving Systems. ADAS and autonomous driving improve safety and save lives.

Application Note 2018-07-26

How to Optimize Measurement Speed of Your DAQ - White Paper
This white paper will show you how to optimize the measurement speed of a midrange DAQ system, Keysight’s DAQ970A system, to meet most of your design validation tests. You will learn how to choose the right hardware and configuration settings that will help you optimize your measurement and transactional speed.

Application Note 2018-07-17

Accelerating from 100GE to 400GE in the Data Center Advanced Modulation and Coding Challenges
The move from 100GE to 400GE in the data center is revolutionary, not evolutionary. Optical transceivers will need to use advanced signal modulation and coding to reach 400GE speeds. These techniques create new test challenges for transceiver manufacturers.

Application Note 2018-05-30

Testing Automotive DC-DC converter with Keysight TS-8989 - Application Note
This paper discusses emulation of input signals, load simulations and measurements for testing high-power automotive DC-DC converter electronic control units and the TS-8989 functional tester.

Application Note 2018-04-12

PDF PDF 781 KB
Testing Next Generation AC Controller with BLE Radio Technology - Application Brief
How an air conditioner manufacturer tested their next generation controller with Bluetooth Low Energy radio technology.

Application Note 2018-04-11

PDF PDF 695 KB
Achieve Accurate Two Wire Resistance Measurements with the Keysight 34923A and 34924A Multiplexers -
This application note provides an overview of how to make an accurate two-wire resistance measurement with the Keysight 34980A and a multiplexer.

Application Note 2018-03-20

1 2 3 4 5 6 7 8 9 10 Next