Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Connect with the experts

 

Erik Diez,
Senior Product Manager

Erik Diez is a Senior Product Manager in the Keysight Technologies Microwave and Communications Division in Santa Rosa, California. In his 34-year career with the company, he has held numerous roles in marketing, R&D, and application engineering related to a variety of signal analysis and generation products. Erik holds a BSEE from UC Davis and an MSEE from UC Berkeley.

Workshop: Multi-emitter Simulation for Electronic Warfare Receive Test
Tuesday October 7th 13:30- 14:15

 
Dave Brannon, Solutions Marketing Engineer

Dave Brannon is a Solutions Marketing Engineer in the Keysight Software and Modular Solutions Division and is based in Loveland, Colorado. Dave joined HP/Keysight in 1983 and has held many roles in Marketing including technical support, product marketing, business development, product management, and applications engineering management. He has worked on various modular formats including VXI, PXI, AXIe, and proprietary modular. He is currently responsible for marketing programs for modular solutions in the A/D market. Dave holds a BSEE from the University of Colorado.

Workshop: Advances in Active Array Calibration
Tuesday October 7th 14:30- 15:15

 
Michael Barnard, Hardware R&D Engineer

Mike Barnard is a Hardware R&D Engineer in the Keysight Technologies Microwave and Communications Division in Santa Rosa, California. He has over 24 years of experience in the A/D and test and measurement communities. Mike has been with the company for 14 years, working mostly in the area of DSP and FPGA design. He holds a BSEE from California State University, Fresno and an MSEE from University of Southern California, Los Angeles.

Workshop: Wideband Signal Analysis
Tuesday October 7th 15:30- 16:15

Workshop: Signal Analysis Fundamentals
Thursday October 9th 13:30- 14:15

 
Dan Dunn,
General Manager
RF/Microwave Handheld Instruments

 

Dan Dunn is General Manager at Keysight Technologies Component Test Division (CTD) responsible for worldwide RF and microwave handheld instruments. He joined Keysight Technologies (Hewlett-Packard) in 1995 as an antenna systems engineer. Dan has held various leadership positions at Keysight including worldwide CTD marketing manager, global sales manager, product marketing manager and product manager for the 8510 and PNA network analyzer families. Dan earned bachelor’s and master’s degrees in electrical engineering from the University of Central Florida and attended executive education at Harvard University.

Workshop: Precision Validation of Radar System Performance in the Field
Tuesday October 7th 16:30- 17:15

 
Joel Dunsmore,
Senior Solution Architect

Since graduating from Oregon State University with an MSEE (1983), Joel Dunsmore has worked for Keysight Technologies (formerly Hewlett-Packard) at the Sonoma County Site. He received his Ph.D. from Leeds University in 2004. In 2008 he was promoted to the rank of Keysight R&D Fellow, working for the Component Test Division. He was a principle contributor to the HP 8753 and PNA family of network analyzers, responsible for RF and Microwave circuit designs in these products. Recently, he has worked in the area of non-linear test including differential devices, and mixer measurements. He has received 24 patents related to this work, and recently authored the “Handbook of Microwave Component Measurements”. He co-taught an RF course at the University of California, Berkeley, and presented several short courses and seminars through ARFTG, MTT, Keysight

Workshop: Novel Methodologies for Complete Active Component Characterisation
Wednesday October 8th 9:30- 10:15

 
Giovanni D'Amore,
Market Development Manager

Giovanni D’Amore is Market Development Manager at Keysight Technologies EMEA based in The Netherlands. Giovanni joined Hewlett-Packard in 1999, as an Application Engineer providing technical support for RF & microwave instruments like network and spectrum Analyzer for Europe, the Middle East, and Africa (EMEA). Since 2005 he was part of Keysight’s marketing organization responsible, first, for parametric test instruments. Later for the marketing development of the network analyzer and Component Test business in EMEA. Regular presenter at conference around the world and author of several articles on microwave measurement techniques, Giovanni holds a master degree in Electronic Engineering with specialization in Microwave and Telecommunications from Palermo University (Italy).

Workshop: Impedance Measurement: from Micro Scale to Nano Scale
Wednesday October 8th 10:30- 11:15

 
Anthony Lord - Strategic Channel Manager- Cascade Microtech

Anthony has been involved in on-wafer Microwave measurements for over 20 years, and spent the last 18 years with Cascade Microtech in various technical and business roles developing new on-wafer measurement tools and solutions to improve measurement accuracy and repeatability. His current goals are to take integrated measurement to a higher level by forming strategic partnerships to enable complete wafer level measurement solutions.

Workshop: Breakthrough On-Wafer Test Solutions
Wednesday October 8th 11:30- 12:15

 
Stewart Forsyth, Business Development Manager

Stewart Forsyth is the EMEA Business Development Engineer for Microwave and Communications Division and is based in the UK. He has worked in manufacturing, manufacturing engineering and also marketing roles for multiple products including Noise Figure Analyzers, Spectrum/Signal Analyzers, Signal Generators and Power Meters. Stewart has been involved in supporting customers and application engineers in various technologies and industries in his 32 year career with the company.

Workshop: Improvements in Y-factor Noise Figure Measurement Uncertainty
Wednesday October 8th 12:30- 13:15

 
Matt Ozalas,
Senior RF Module Specialist

Matthew Ozalas obtained his MSEE and MBA from Arizona State University in 2010. From 2001 to 2005, he worked as part of the Advanced Wireless Department at the Mitre Corporation where he did RFIC and Power Amplifier Design. From 2005-2013, he worked at Skyworks Solutions in the Santa Rosa Design Center, designing and developing high volume multiband power amplifier and front end modules for wireless handsets. He joined Keysight EEsof in 2013 as an Application Developer.

Workshop: Tackling RF Power Amplifier Module design with ADS and EM

Wednesday October 8th 13:30- 15:15

 
HeeSoo Lee,
3DEM Application Specialist

Hee-Soo Lee holds a BSEE degree from the Hankuk Aviation University, Korea. He has more than 25 years of design and simulation experience in the area of RF and Microwave designs, and is currently the Applications Specialist for 3D EM solutions at Keysight EEsof EDA

Workshop: Tackling EMI/EMC application with EMPro

Wednesday October 8th 15:30- 17:15

 
Suren Singh,
Mm-wave and THz Application specialist

Suren Singh received his BSEE from University of Durban-Westville, Durban South Africa in 1985. He completed a Graduate Diploma at the University of Witwatersrand, Johannesburg South Africa in December 1992. He then went on to complete his MSEE at the University of Witwatersrand, Johannesburg in 1995. Suren has been with the Hewlett-Packard Company and now Keysight Technologies since 1986. His experience at Keysight includes application engineering, product design, manufacturing and test process development for microwave hybrid microcircuits. He currently holds the position of an application specialist business manager focused on the terahertz measurement solutions. In addition he is responsible for the metrology products for performance network analyzers, including both calibration and verification.

Workshop: New Developments in mm-Wave and THz Markets, Technologies, and Measurements
Thursday October 9th 9:30- 10:15

 
Allison Douglas, Market Development Manager

Allison Douglas is a Market Development Manager for the Microwave and Communications Division in Les Ulis, France. Allison joined Keysight Technologies in 2004 as an R&D engineer, and has been in several different roles since including an application engineer supporting wireless technologies, product manager for signal generators. She is currently a market development manager for signal analyzers and signal generators the EMEA region. She holds BSE in Electrical Engineering and Biomedical Engineering from Duke University and an MBA from Gonzaga University.

Workshop: Millimeter Wave Applications in Wireless: 5G and Backhaul
Thursday October 9th 10:30- 11:15

 
Bobby Bhowmik, R&D Software Manager

Bobby Bhowmik is an R&D Software Manager in Keysight Technologies Software and Modular Solutions Division in Santa Rosa, California. He has been with HP/Keysight for 18 years and has been a software developer, software architect, and software manager in multiple system and instrument divisions. Bobby holds a MS in Computer Engineering from University of Southern California, Los Angeles.

Workshop: Customized real-time signal processing with high speed multi-channel digitizer platform and Firmware Development Kit
Thursday October 9th 11:30- 12:15
 

 
Wilkie Yu,
Marketing Manager
RF/Microwave Handheld Instruments

 

Wilkie Yu is the worldwide marketing manager for Keysight Technologies’ RF and microwave handheld analyzers. Prior to this role, he was product manager for Keysight’s PXA and X-Series signal analyzers as well as the Asia business development manager for signal sources. Wilkie also spent time in China as the market development manager and helped build the local marketing organization. Wilkie earned his bachelor of science degree in electrical engineering and computer science from the University of California, Berkeley

Workshop: A Using Modular and Handheld Instruments for Microwave Education
Thursday October 9th 12:30- 13:15

 
David Ballo,
Senior Application Manager

David Ballo is a Senior Application Engineer with 34 years of experience at Keysight Technologies’ Component Test Division in Santa Rosa, California. After graduating from the University of Washington in Seattle, he spent ten years in R&D designing analog and RF circuits for signal analyzers. Since then, he has written many application notes, technical articles, and seminar presentations on a wide variety of network- and spectrum-analyzer measurement topics, as well as help develop measurement applications for the PNA family of network analyzers.

Workshop: Network Analysis Fundamentals
Thursday October 9th 14:30- 15:15

 
Andrew Benn, Business Development Manager

Andrew Benn is a Business Development Manager for the EMEA region based in France. Over his 25-year career, he has held numerous positions in marketing and sales for manufactures of test instrumentation and high-speed semi-conductors in Canada and France.

Workshop: RF Hand-Held and Power Measurement Fundamentals
Thursday October 9th 15:30- 16:15

 
Roland Marquardt,
PXI Solution
Specialist

Roland Marquardt, based in Germany is Market Development Manager EMEA for Keysight Technologies’ Software & Modular Solutions Division.
Roland joined HP/Keysight 1980 and has held a variety of positions in production and test engineering, test engineering management, application engineering, project management and business development with main responsibilities on recommending and providing test systems, test applications and turnkey test solutions to customers.

Prior to joining the newly formed Keysight Modular Business in 2010, Roland was Business Development Manager for Wireless and Automotive Test Systems within Keysight’s Systems Business in EMEA.

Roland holds a degree in “Electronics and Communication Technologies” from Berufsakademie Stuttgart, Germany.
 

Workshop: One Measurement Science across Test Platforms (Benchtop vs. PXI)
Thursday October 9th 16:30- 17:15