Вы искали эту информацию? Посмотреть другие результаты поиска:

 

Связаться с экспертом

Радиоизмерения

Уточнить список

По Отрасли/Технологии

По типу содержания

По типу оборудования

126-150 из 558

Упорядочить:
Optimizing RF and Microwave Spectrum Analyzer Dynamic Range -- Application Note 
The dynamic range of a spectrum analyzer is traditionally defined as the ratio, in dB, of the largest to the smallest signals simultaneously present at the input of the spectrum analyzer that allows measurement of the smaller to a given degree of uncertainty. The signals of interest can either be...

Руководство по применению 2015-07-24

Speed, Accuracy, and Performance in Your RF Module Testing 
Co-branded Solutions Partner brochure with Eljay Microwave on RF module testing

Брошюра 2015-07-16

PDF PDF 504 KB
DDR3 Memory Protocol Analysis and Compliance Verification – FuturePlus 
Straightforward and reliable DDR3 DIMM bus analysis at 2400MT/s and DDR3 SO-DIMM analysis at 1867MT/s – FuturePlus System and Keysight

Совместное решение 2015-07-14

 
Programming with the N937xA PXIe Vector Network Analyzers - Application Note 
This application note discusses the process of developing a C# application using an IVI driver as the programming remote driver for the M937xA PXIe vector network analyzer.

Руководство по применению 2015-07-07

PDF PDF 4.75 MB
IMS 2015 Demos from Keysight EEsof EDA 
YouTube video playlist containing International Microwave Symposium (IMS) 2015 demo videos from Keysight EEsof EDA MicroApps.

Демонстрация 2015-06-19

 
How to Match RF Impedance Effectively By Optimally Selecting SMT Devices 
This video demonstrates a very effective RF impedance matching methodology with SMT devices that helps RF engineers save time and cost. With this methodology, RF engineers can start to match the design with a list of good combinations of SMT devices which satisfies the target impedance and loss specifications instead of trying out unlimited possibilities at the workbench. This methodology should work very well with typical wireless or mobile product designs such as smart phones.

Видеоролики, демонстрирующие решение прикладных задач 2015-06-11

 
Keysight Technologies to Demonstrate Latest EDA Software Solutions at 52nd Annual DAC 
Keysight announces it will demonstrate its latest electronic design automation software for microwave, RF, high-frequency, high-speed digital, RF system, electronic system level, circuit, 3-D electromagnetic, physical design and device-modeling applications at the Design Automation Conference (DAC) 2015, Booth 2020, San Francisco, June 8-10.

Материалы для прессы 2015-06-08

 
Determining the Best RF Simulation Tools as an RF Consulting Engineer 
Independent consulting in RF and microwave engineering is a growing trend and many engineers are delivering their highly sought after RF expertise back to the industry.

Статья 2015-06-08

PDF PDF 2.64 MB
Noise Figure Uncertainty Calculator 
The noise figure uncertainty calculator has been created to aid your design work, from components through to systems, helping you meet the continued demand for higher system performance.

Инструмент для анализа 2015-05-29

 
Intercept Technology Announces Enhancements to Advanced Design System Interface Functionality 
Intercept Technology Inc., a leading EDA software developer for PCB, RF and hybrid design solutions, announces enhancements to the ADS Board Link interface functionality within Pantheon.

Материалы для прессы 2015-05-22

 
TowerJazz to Provide Customers with New Silicon RFIC Design Interoperability Feature in ADS 
TowerJazz, the global specialty foundry leader, announces access to a new silicon RFIC interoperability feature available in Advanced Design System (ADS) EDA software.

Материалы для прессы 2015-05-20

 
IHP supports Silicon RFIC Interoperability with Keysight Technologies’ ADS 2015 Release 
IHP announces support for ADS-Virtuoso Interoperable process design kits (PDKs). The PDKs are designed for use with Keysight’s Advanced Design System (ADS) EDA software and provide users access to a new Silicon RFIC interoperability feature available in ADS 2015.01.

Материалы для прессы 2015-05-19

 
Intercept Technology Announces Integration of Advanced Design System Macros in Pantheon 
Intercept Technology Inc., a leading EDA software developer for PCB, RF and hybrid design solutions, today announced an agreement to integrate Keysight ADS Board Link macros within the Pantheon design application environment.

Материалы для прессы 2015-05-18

 
Keysight Technologies to Demonstrate Electro-Thermal Solver at IMS 2015 
Keysight announces it will demonstrate the ADS Electro-Thermal Simulator at the IEEE MTT-S IMS 2015, Booth 739, Phoenix, May 17-22. The solution provides accurate, temperature aware IC simulation results by using device temperatures that take into account thermal coupling and thermal characteristics of the RFIC/MMIC component packaging.

Материалы для прессы 2015-05-13

 
How to Design an RF Power Amplifier: Class J 
This short video will provide an introduction to Class J Power Amplifiers and demonstrate a superior, time saving methodology to design and practically realize a Class J RF power amplifier. First,a theoretical approach will be used to design an ideal circuit from first principles and then circuit design tools will be utilized to synthesize a more realistic circuit topology from the ideal case. The design process will be illustrated using a commercially available GaN MMIC device from Qorvo.

Видеоролики, демонстрирующие решение прикладных задач 2015-05-07

 
Keysight Technologies to Demonstrate RF, Microwave, mmWave Design, Measurement Solutions at IMS 2015 
Keysight announces it will demonstrate the latest RF, microwave and mmWave design and measurement solutions for R&D, manufacturing and service at the IEEE MTT-S International Microwave Symposium, Booth 739, Phoenix, May 17-22.

Материалы для прессы 2015-05-04

 
Keysight EEsof EDA "How To Design Power Amplifier" Videos 
A collection of "How to Design Power Amplifier" Videos from Keysight EEsof EDA.

Видеоролики, демонстрирующие решение прикладных задач 2015-04-22

 
Keysight Technologies to Showcase Software, Handheld RF/Microwave Products at WAMICON 
Keysight announces it will demonstrate new software and handheld RF/microwave capabilities at WAMICON 2015.

Материалы для прессы 2015-04-09

 
Millimeter Wave Frequency Extension for Vector Network Analyzers – Farran Technology 
Millimeter wave frequency extension solutions for vector network analyzers from Farran Technology and Keysight

Совместное решение 2015-04-08

 
IBM PDKs support RFIC interoperability with latest Keysight Technologies’ ADS software release 
IBM now offers specialty foundry clients a new set of interoperable process design kits (PDKs). The PDKs are designed for use with Keysight Technologies’ Advanced Design System (ADS) EDA software and Cadence Design System’s Virtuoso® custom design platform, providing users access to a new silicon RFIC interoperability feature available in ADS 2015.01.

Материалы для прессы 2015-04-06

 
Turn-key conducted and radiated EMC test systems for complete test confidence – Frankonia EMC Test 
Turn-key conducted and radiated EMC test systems for complete test confidence – Frankonia and Keysight

Совместное решение 2015-03-17

 
How to Design an RF Power Amplifier: Class E 
This video provides an introduction to Class E Power Amplifiers and demonstrates a superior, time saving methodology to design and practically realize a Class E RF power amplifier using first principles to build an ideal circuit and then utilizing circuit design tools to synthesize a more realistic circuit topology from the ideal case.

Видеоролики, демонстрирующие решение прикладных задач 2015-03-11

 
Keysight Technologies to Demonstrate Latest EMC Design, Test Tools at EMCSI Symposium 
Keysight announces it will demonstrate and discuss the latest tools and techniques on 1) EMC design and testing, and 2) signal and power integrity at the EMCSI 2015 Symposium, Santa Clara Convention Center, Booth 618, March 17-19.

Материалы для прессы 2015-03-09

 
How to Predict Package and Bondwire Effects on Your RF-Module Designs 
This short video shows how to predict package, board, and bond wire effects on your RF-module designs which subsequently enables you to fix the design prior going to fabrication. The video demonstrates the process of building modules that comprise different technologies and performing EM simulation on them.

Видеоролики, демонстрирующие решение прикладных задач 2015-02-19

 
How to Use Envelope Tracking to Improve Power Amplifier Efficiency 
This video introduces basic concepts regarding applying envelope tracking to improve power amplifier efficiency.

Видеоролики, демонстрирующие решение прикладных задач 2015-02-10

 

Назад 1 2 3 4 5 6 7 8 9 10 ... Следующие