Keysight Webinars

Original Webinar Date: September 20, 2022

With satellite competition growing exponentially, advanced virtual prototyping and design platform techniques are needed to keep pace. Design teams need to drill down into any part of a design, measure components, and bring results back into the system model to simulate with higher fidelity than ever possible.

Original Webinar Date: June 21, 2022

Phased Array is an enabling technology for Defense and SatCom applications. The IC market is exploding with new Phased Array IC solutions and choosing the right Digital Beamformer IC (BFIC) is crucial for the complete system performance.

Original Webinar Date: April 26, 2022

The aerospace and defense industry is racing to develop new systems and capabilities. A key to achieving faster, lower-cost development is a Model-based Engineering (MBSE) approach, integrating data through models and predicting performance through ‘digital twin’ architectures. In this session, we will discuss how Keysight’s PathWave System Design software connects to and enables your MBSE flow. It also covers how critical it is to link simulation and measurements to achieve these goals.

Original Webinar Date: March 30, 2022

Join our webinar with Robert Stephens to learn how Keysight’s extensive portfolio of 5G test equipment will enable prospective NTN vendors to accelerate their innovations in #5G #non-terrestrial networks.

Original Dates: March 14, 21 and 28 2022

Check in between March 14 and March 28 as our Keysight experts release a new presentation every week exploring different EMSO related topics.

Register now for one or all three and we will let you know when they are available to view.

Original Webinar Date: March 15, 2022

Register today for part one of Keysight’s VNA Active Device Characterization Essentials webinar series to learn about the benefits of VNA modulation distortion characterization for reliable measurement repeatability in real-world test conditions.

Original Webinar Date: February 16, 2022

Learn about SCALABLE’s Network Digital Twin approach and how this new technology is impacting how we protect ourselves against cyber-attacks in complex multi-domain networks.

Original Webinar Date: February 9, 2022

Learn how Keysight Quantum Engineering Solutions is helping hardware leaders and industry users achieve the true capabilities of quantum computing.

Original Webinar Date: September 23, 2021
Duration: 3 hours

Topics Covered

• Advanced Signal Analysis and 5G Network Test (50 minutes)
• 5G for Satellite Communications (45 minutes)
  
• Accelerating Innovations in 5G Vehicles (20 minutes)
  
• 5G NTN Link Emulation with S8825A Satellite and Aerospace Channel Emulation Toolset (28 minutes)
  

View full agenda

Original Webinar Date: September 30, 2021
Duration: 5 hours

Topics Covered

• Time to Digital Converters for Quantum Sensing Applications (17 minutes)
  
• Low Noise Processes and Characterization (45 minutes)
  
• Phase-Noise Theory (45 minutes)
  
• Phase Noise Measurement from DC to mmWave (45 minutes)
  
• Simplifying VNA Measurement Setup and Optimization of Complex Active RF Devices (57 minutes)
  

View full agenda

Original Webinar Date: October 7, 2021
Duration: 2:30 hours

Topics Covered

• High Bandwidth Oscilloscope for Multi-port Coherent RF Pulse Analysis (50 minutes)
  
• Modern Deceptive Jamming (DRFM) Design (50 minutes)
  
• Developing Spectrum Intelligence to Advance Frequency Management (30 minutes)
  

View Full Agenda

Original Webinar Date: September 15, 2021

Learn how to build and verify your dynamic SatCom system performance using a ‘digital twin’ created using PathWave System Design from Keysight and STK from AGI, an Ansys Company.

Original Webinar Date: September 6, 2022

Neste webinar iremos explorar como configurar e depurar protocolos seriais em osciloscópios InfiniiVision para te ajudar a solucionar seus desafios rapidamente.

Original Webinar Date: April 20, 2022

Until now, doing EMI of simulations required expertise in electromagnetics. In this webinar, we will discuss how to overcome this challenge via post-layout simulation using Keysight's power electronics simulation software.

Fecha de Transmissión 16 de Marzo, 2022

En este webinar haremos un recorrido por las formas más comunes de configurar un formato de trigger para capturar puntos específicos de una señal - desde un simple pulso o evento repetitivo hasta capturar complejos comandos embebidos en un protocolo serial.

Además, exploraremos diferentes herramientas del osciloscopio y puntas de prueba que nos ayudarán a depurar nuestros problemas y fallos de diseño.

¿Te interesa hacer este recorrido técnico con nosotros?

Fecha de Transmissión March 10, 2022

Cuáles son los factores más importantes que debo de considerar en mi banco de prueba remoto. Qué tipo de instrumentos de medición y software requiero para la integración y funcionamiento de mi banco de prueba modern. Cómo puedo administrar desde la nube las sesiones de trabajo para eficientar el uso de mis bancos de prueba.

Fecha de Transmisión: February 23, 2022

Conheça esta nova linha de equipamentos Smart Bench Essentials!

A linha Smart Bench Essentials é composta por instrumentos fundamentais para sua bancada: Osciloscópio, Gerador de Funções, Fonte de Alimentação e Multímetro. Cada equipamento é projetado para te ajudar a superar os desafios do dia a dia, sem pesar no seu bolso.

As interfaces intuitivas e unificadas facilitam a usabilidade e a aprendizagem e, combinando a densidade de funções, é possível utilizá-los nas mais diversas aplicações industriais ou educacionais.

A conectividade USB e LAN, padrão nestes instrumentos, te auxilia nos desafios de conectividade remota e automação de testes. Além do software BenchVue para uma experiência completa de controle via PC.

Com esta combinação de recursos e preço, ficará difícil não os ter em sua bancada!

Fecha de Transmisión: November 24, 2021
Ahora disponible on-demand

Abstract: El desarrollo de nuevas tecnologías y nuevos estándares en la industria ha traído como consecuencia que los equipos de medición innoven en tecnología. Es común escuchar nuevos términos referidos al suministro de alimentación como: secuencia de arranque, generación de pulsos de potencia, modo lista, manejo de salida en corriente constante, y muchos otros.

Las fuentes de alimentación se han modernizado para cumplir con los nuevos retos en el suministro de energía; ya no solo proveen un voltaje y una corriente, hoy día una fuente de alimentación moderna puede desempeñar muchos roles en una estación de prueba: medir, registrar datos, interrumpir el suministro ante una eventualidad, limitar el suministro, compensar, entre otras posibilidades.

¿Quieres saber cómo sacar el máximo provecho de una fuente de alimentación inteligente?

Original Webinar Date: October 26, 2021

Abstract: Please join this insightful Keysight webinar to learn what qualities are characteristic of excellent precision bench instruments and how they can solve some of your more stringent bench application challenges.

Original Webinar Date: October 19, 2021

We’ll show examples of tools that can facilitate instrument programming and cover application-specific software that can greatly simplify complex, power testing tasks.

Original Webinar Date: August 24, 2021

In this webinar, Keysight’s Power Integrity Lead Kenny Johnson will discuss the importance of power integrity-related measurements like PDN impedance, power rail integrity, PMIC Power Sequencing, PSRR, control loop response, static/dynamic loads (current), and radiated emission. He will also include a demonstration using the new 8-channel Infiniium MXR-series.

This webinar covers power integrity measurements and is part 5 of Keysight’s 7-part All About Power webinar series.

Original Webinar Date: July 21, 2021

Power semiconductors are essential in power converter design, but data sheets often do not provide sufficient information for the circuit designer. This webinar is targeted at power circuit designers who may not have extensive power semiconductor knowledge, but who would like to understand better how to select the right power semiconductors to meet their converter design needs.

Original Webinar Date: June 23, 2021

This webinar will focus on the practical aspects of using power supplies and electronic loads. If you’ve ever wanted to optimize your power instrument for your application, then the following topics will be of great interest to you.

• Eliminating Ohmic line drop
  
• Operating electronic loads near zero volts
• Connecting supplies and loads in series and parallel
• Using built-in protection features

Original Webinar Date: May 26, 2021

We will discuss various types of sources such as two-quadrant power supplies, source measurement units (SMUs), and regenerative power supplies. We’ll also review DC electronic load operation and applications. To enable the selection of the right power source and electronic load for your application, our Keysight expert will offer tips on interpreting specification sheets and determining the right power solution for the given task.

Original Webinar Date: April 28, 2021

In this webinar, we’ll cover theoretical topics of electrical power including…

• Resistance and resistivity
• RMS power, real versus apparent power (power factor)
• AC power (resistive, capacitive, and inductive loading)
• Power transmission and three-phase power
• Power conversion (e.g. AC-to-DC and DC-to-DC)

Original Webinar Date: April 13, 2021

Performing current vs. voltage characterization on devices and materials at very low current levels presents a unique set of measurement challenges. Normal measurement issues such as noise, transient signals and cabling and fixturing parasitics are much harder to solve when dealing with currents in the femtoamp range. In addition, many cutting-edge materials have extremely high resistances that conventional DMMs and source/measurement units (SMUs) cannot measure. In this seminar Keysight will explain the measurement techniques, tricks and tools necessary to measure currents down to 0.01 femtoamps and resistances up to 10 Peta Ohms with both high measurement confidence and repeatability.

Original Broadcast Date: July 26, 2023

Discover the fundamentals of the group delay, noise power ratio (NPR), and multitone measurements, the testing challenges, and Keysight’s new test system solution to overcome these challenges, in a webinar empowered by a live demo.

Original Broadcast Date: July 18, 2023

Join Keysight's USB expert, Jit Lim, as he explores the new features and test challenges introduced by the updated standard, including PAM3 signaling, asymmetric and alt modes, linear retimers, and power delivery requirements.

Original Broadcast Date: March 16, 2023

Find out what happens when you dip a 50-Ω path in liquid nitrogen. Plus, get answers to other burning engineering questions as well.

Original Broadcast Date: March 16, 2023

The new digital learning suite is transforming engineering education for you. Do you want to know how? Join us to get a sneak preview of the soon-launching holistic digital learning experience.

Original Webinar Date: August 23, 2022

Do you know what instrument to use and when to use it? Join Keysight Fellow Dr. Joel as he compares and contrasts noise figure measurements on network analyzers, signal analyzers, and noise figure analyzers. He’ll show the benefits of each solution and will recommend when to use them to optimize Raytheon's noise figure measurements.

Original Webinar Date: April 20, 2022

Join Keysight principal program manager Rick Eads, member of the PCI-SIG® board of directors, as he discusses the latest PCIe® 6.0 developments and what you need to consider when evaluating your PCIe 6.0 designs.

April 6 and 7, 2022

For those who can’t attend DesignCon in person, don’t worry, we’ve got you covered. Get to know our booth from the comfort of your own office or home. The Keysight team will be live from the show floor on April 6 at 1:00 p.m. Pacific Time. We will take you on a 30-minute interactive journey through each demo station. You’ll feel like you’re in the booth with us.

Original Webinar Date: March 24, 2022

This last webinar in the High-Speed Digital Series will teach you about Forward Error Correction (FEC). FEC can effectively eliminate data loss (frame loss) in systems with moderately high Bit Error Rates (BER) of 1E-4 or more. However, in real systems, errors sometimes occur in bursts and can lead to FEC failure and non-zero frame loss ratio (FLR).

Original Webinar Date: March 17, 2022

This third session in the High-Speed Digital Webinar Series will be a practical discussion of IEEE 802.3ck (100gbps/lane) physical layer conformal testing for both Tx and Rx. 100G silicon is merging from the early specifications and a world of simulation. This discussion will help bridge the gap between simulation and physical layer evaluation of SerDes design and conformance testing.

Original Webinar Date: February 22, 2022

Join this second session in the High-Speed Digital Webinar Series to help you better understand the latest updates in the Type-C ecosystem, which includes USB, Display Port (DP), and Thunderbolt.

Original Webinar Date: February 17, 2022

Whether working on a USB4 IP, silicon, peripheral, or cable design, ensuring compliance to the latest standard can be complex and time consuming. USB4 connections have up to four channels of simultaneous data transfer and enhanced power delivery for bi-directional device charging. You need solutions to test, debug, and characterize your design from a partner that understands the complexity of these connections. Join us as we discuss how Keysight solutions support each stage of the USB4 design cycle.

Original Webinar Date: February 15, 2022

This webinar is the first in our High-Speed Digital Webinar Series and will help you better understand some of the key challenges of moving from NRZ to PAM4 technology along with new measurement requirements for transmitter and receiver testing.

Original Air Date: January 12, 2022

Jit Lim provides an overview of USB4 along with an update on the latest developments with the standard. Hear about what you need to consider when testing, debugging, and characterizing your USB4 designs.

Western Canada - Original Webinar Date: November 30, 2021
Eastern Canada - Original Webinar Date: December 2, 2021

Join us for a virtual high-speed digital seminar. Our technical experts and local application engineers will be online to answer your questions live and demonstrate key topics. Sessions include:

• Advanced Testing Challenges at 32GBaud PAM4 with PCIe 6.0
• Next Gen Development in Type-C Ecosystem
• Physical Layer Validation Challenges of Characterizing 100Gbps/lane Designs
• Solving Your Forward Error Correction Problems

This webinar briefly touches on transmission line fundamentals and then focuses on practical ways to troubleshoot and improve physical layer components inside the internet infrastructure.

Learn about oscilloscopes and probing technology from the ground up.

Original Webinar Date: October 27, 2022

1.6T is the future of Ethernet, and the future is almost here. Make sure you’re ready with expert predictions, advice, and test solutions.

Join us as industry Ethernet experts discuss:

• the latest Ethernet developments
• what to expect from 1.6T
• 1.6T challenges the market must overcome
• the world’s first comprehensive test solution for 1.6T

Original Webinar Date: September 14, 2022

Wi-Fi 6E takes Wi-Fi into a new realm that enjoys the benefit of a much larger 6GHz spectrum capacity. Join this session and learn how to gain insight into your Access Point performance under OFDMA and verify if improvements in latency and quality of experience are achieved.

Original Webinar Date: May 26, 2022

Our experts will discuss the rise of distributed cloud and reveal how we helped two major service providers’ overcome the complexities of cloud migration.

Original Webinar Date: December 7, 2021

Join research analyst Alan Weckel from 650 Group and Keysight’s internal expert on this webinar to learn more about the challenge of securing high-speed Ethernet networks, advantages of MACsec technology, and effective MACsec performance benchmarking to ensure robust implementation, smooth deployment, and higher ROI.

Original Webinar Date: July 21, 2021

In this webinar, experts from Keysight and FireEye will discuss their joint solution which:

• ensures complete visibility and security analytics of Zero Trust environments to mitigate threats
• keeps your organization secure, regardless of where your assets and workflows live
• enables Zero Trust security controls for remote workforces

Date: August 29, 2023
Time: 9:00 a.m. PT

Join our webinar and discover the latest innovations in test automation with Eggplant Test 7.0. This update includes robust integrations, parallel mobile app testing, and enhanced collaboration capabilities. Learn how test automation replaces do-it-yourself manual testing.

Date: August 9, 2023
Time: 8:00 a.m. PT

Tired of facing constant downturns in software testing? Join us for an upcoming webinar where we'll discuss effective strategies for managing and overcoming these challenges. Our expert panel will share their insights and best practices to help you navigate the ups and downs of software testing. Don't miss out on this opportunity to learn from the best in the industry.

Original Broadcast Date: July 19, 2023

Technology has advanced a great deal in the past few years, but many software testers still opt to test the old-fashioned way. Why do so many companies continue to test software manually? Discover the hidden costs of manual and in-house software testing processes and discuss the indispensable role of automated testing. You’ll learn how to optimize software testing and understand the true costs of in-house software testing.

Date: June 28, 2023
Time: 11:30 a.m. PT

The ability to leverage workflows in product development plays a critical role in digitally transforming processes. Learn how Keysight can help you ease your workflow challenges in design and test.

Original Broadcast Date: June 15, 2023

Learn how automated testing can increase test coverage, perform efficient cross-browser and device testing, and prevent missed release dates with the click of a button. Don't miss the chance to transform your testing process.

Original Broadcast Date: June 7, 2023

Discover how to integrate HPC into your workflow and access unlimited hardware in the cloud a accelerate simulation and reduce board revisions.

Original Broadcast Date: May 31, 2023

Learn how Eggplant solution’s test automation capabilities enable software testing, automation of workflows and validation of user experiences across the full stack - physical layer to advanced device-level experiences.

Original Broadcast Date: April 25, 2023

Wave goodbye to lost time, high testing costs, & headaches. We have a "people-oriented" way of automating EMR testing that makes creating scripts easier than ever. Join us to hear the vision for the future of low-code testing in healthcare.

Original Broadcast Date: March 21, 2023

Join former NASA astronaut and Navy SEAL Chris Cassidy and other aerospace and defense experts in this roundtable discussion on intelligent automated software testing.

Original Broadcast Date: March 16, 2023

Mixed reality is changing shopping and expanding the possibilities for retailers to connect with their customers. Taking advantage of these opportunities relies on high quality software. Join our panel on March 16th and discover how this disruptive technology is going mainstream.

Original Broadcast Date: March 7, 2023

Curious about what's in store for the future of RPA? Meet us for 15 minutes to learn all about it. Join us on March 7 as we explore what RPA 2.0 is, how it enables more efficienct care, how to set it up quickly and easily, and more. Switch off your stressors while gaining new strategies for employee burnout prevention. Register now.

Original Broadcast Date: February 21, 2023

Salesforce spans nearly every department in an organization, but each department uses the platform differently. Each has its own needs, use cases, and levels of support. Testing Salesforce is no different. Each department has different test cases based on the key features it uses. So, what is the golden rule that applies to everyone when it comes to testing Salesforce? In this webinar, Humza Ahmad, solutions architect at Keysight Technologies, will discuss the importance of testing Salesforce and which strategies to apply.

Original Broadcast Date: January 26, 2023

Mobile technology empowers retailers to connect with customers anywhere, anytime, with unique brand experiences. Join our panel discussion to discover why retailers must embrace mobile technology to improve customer engagement now and in the future.

Original Broadcast Date: January 18, 2023

How does test automation drive a winning formula for your online customer experience? When 71% of auto insurance shoppers start their research online, ensuring your site is thoroughly tested is crucial. * Learn how to adopt a more human-like test approach to achieve success.

Original Broadcast Date: December 7, 2022

Integrating a robust AI-powered test automation strategy into your CI/CD lifecycle is critical — but how do you ensure your solution plays nicely within the cloud native computing foundation (CNCF) landscape? On December 7, learn about the Keysight Eggplant Test Automation solution during our webinar with Jeremy Emberling.

Original Broadcast Date: December 14, 2022

The US Department of Defense (DoD) will deliver enterprise-wide improvements in a number of key areas that align with the Software Modernization Strategy. On December 14, our panel of defense and software experts will discuss what the DoD recommendations mean for the aerospace and defense sectors.

Providing a frictionless checkout experience is vital for retailers to maintain customer flow, revenue, and satisfy customers. A customer-centric strategy coupled with the right technological capabilities enable this experience and allow for a differentiated experience. Award-winning Albertson’s had the imagination to revolutionize their POS, PIN pad, and fuel pump experiences. Thanks to an innovative test automation platform and intelligent robotic solution, they delivered on their vision.

Original Broadcast Date: August 24, 2022

Too few people genuinely understand the potential, and the challenges, for AI in their sector. Whether it’s retail, aerospace, healthcare, or financial services — the one thing AI has in common across all industries is uncertainty. Every industry relies on software, and AI has a huge role to play in the coming years to improve, accelerate, and secure the testing that new software projects depend on. But what does that transformation look like? And what’s the potential for transformation across all industries? In this webinar, we bring together the top minds across the AI and software testing space to discuss just that.

Original Broadcast Date: September 21, 2022

Robotic process automation (RPA) has the power to enable smooth, fast, error-free EMR testing and empower healthcare professionals to do what they do best: care for their patients. Together with Eggplant Technical Consultant Dave Hester and Redpoint Innovations founder Chuck Schneider, we’ll discuss the future of RPA in healthcare — and what that means for you.

Original Broadcast Date: April 7, 2022

During this insightful panel discussion, Director of Application Engineering at Staples US Retail, Jeff Besse, reveals how addressing the test challenge with automation accelerated the re-platforming of an entire POS network across over 1,000 stores and kickstarted Staples’ digital transformation journey.

Original Broadcast Date: March 24, 2022

It’s time to change the way you look at software quality. Discover new IDC insights to adapt your testing strategies and drive digital innovation. In this webinar, you will meet Melinda Ballou of IDC, Lynne Beebe of Cerner, and Jonathon Wright of Keysight, as they discuss the latest modern testing practices to ensure the digital quality of your modern applications.

Original Broadcast Date: July 19, 2023

You can now isolate the noise coming from your device under test (DUT), from the rest of your measurement system. Get the true performance of your DUT, using Keysight’s recently announced cross-correlated EVM (ccEVM) technique.

Original Broadcast Date: July 11, 2023

Join us as we explore the driving factors behind industry investments and technological advancements in 5G NTN, while showcasing the practical implementation of satellite link modeling, 5G NTN propagation channels, and end-to-end emulation tools.

Original Broadcast Date: March 22, 2023

During this webinar we will cover how to identify SI issues and how to perform electromagnetic (EM) simulation of signal nets, channel return loss, insertion loss, and impedance Time-Domain Reflection (TDR).

Original Webinar Date: January 24, 2022

Join William Koerner to learn about the state of Wi-Fi 6, 6E and 7 in regulatory compliance and restrictions device manufacturers must understand to deliver devices to the marketplace.

Original Webinar Date: September 15, 2022

FWA is growing quickly to provide fast data connections to areas previously without broadband service. Many fixed-location devices use 5G and WLAN for connectivity. Attend this webinar to learn how to verify the RF and throughput performance of 5G devices for fixed locations.

Original Webinar Date: July 20, 2022

5G ya está aquí y tenemos una gran oferta de dispositivos móviles en el mercado para decidir con cuál podemos empezar a brindar nuestro servicio.

¿Cuál escogemos?, ¿es igual un dispositivo de una marca al otro?, ¿cuál me ayudaría a explotar las capacidades de mi red?, ¿cómo compruebo las características de las terminales móviles y su beneficio con mi red?.

Original Webinar Date: June 22, 2022

Achieving a new 5G breakthrough calls for innovative solutions. Get the insights you need to overcome the latest design and test challenges from technical experts who eat, sleep, and breathe 5G.

Attend this webinar to learn the tools and methodologies that’ll help you maximize your 5G network performance.

Original Webinar Date: June 8, 2022

Nesse webinar, compartilharemos nossos insights sobre testes de campo 5G, focando particularmente no teste de redes em frequências mmWave. Participe do nosso webinar para ouvir e ver análises 5G e dados mmWave coletados e processados usando nossas soluções Nemo. Algumas das principais métricas 5G NR (New Radio), serão demonstradas a partir de medições reais de campo.Nesse webinar, compartilharemos nossos insights sobre testes de campo 5G, focando particularmente no teste de redes em frequências mmWave. Participe do nosso webinar para ouvir e ver análises 5G e dados mmWave coletados e processados usando nossas soluções Nemo. Algumas das principais métricas 5G NR (New Radio), serão demonstradas a partir de medições reais de campo.

Original Webinar Date: June 2, 2022

Descubre cómo validar bajo demanda el desempeño y funcionalidades de tu infraestructura de red a un bajo costo, con las soluciones de Testing as a Service (TaaS) de Keysight.

Original Webinar Date: May 3, 2022

We will explore the 3GPP features that enable 5G private networks as well as the challenges posed by testing 5G base station transmitters in private networks. More specifically, we will discuss the best tips and tricks to optimize signal quality (EVM) measurement in 5G private networks and the latest in signal analysis to tackle your testing challenges. An accurate and insightful testing process will help your smart factories prepare, deploy, and operate faster while using network resources more efficiently and accurately.

Original Webinar Date: April 26, 2022

Learn how the custom, state-of-the-art, chip technology behind our powerful new signal generator will help you continue to innovate in wireless communications and greatly simplify your 5G testing.

Original Webinar Date: March 22, 2022

Join us as Lloyd Wihl provides an overview on how Network Digital Twins can reduce cost and risks of 5G deployments. Register for the webinar today!

Original Webinar Date: February 10, 2022

Brad Jolly gives an overview on Bluetooth Low Energy while also providing an update for Profiles, Qualification Testing, and Cybersecurity.

Original Webinar Dates: January 18, 19 and 20, 2022

Achieving new 5G breakthroughs calls for innovative solutions. Learn how to overcome the challenges of developing, manufacturing, and deploying 5G during Keysight’s 5G Tech Days. In the time it takes to drink your morning coffee (or tea), find out about the latest trends surrounding 5G devices, base stations, and networks, and get up to speed on newly released design and test solutions.​

Agenda and Dates

• Validate 5G Device Performance - January 18
  
• Optimize gNB Performance - January 19
• Maximize 5G Network Performance - January 20

Original Webinar Date: October 27, 2021

In this webinar, you will learn about:

• Market opportunity for virtualized and Open RAN
• Mobile network operators’ plans for O-RAN deployment
• O-RAN interoperability, conformance, and other challenges

View full agenda

Fecha original del seminario web 09 de Setembro de 2021

Neste Webinar você irá aprender:

• O status mais recente de licenciamento de espectro mmWave 5G e implantações de rede em todo o mundo
• Overview da tecnologia
• Execução de testes paramétricos em terminais suportando FR2/ Soluções de teste Keysight para 5G FR2

Original Webinar Date: June 22, 2021

Key learnings:

• Overview of OTA for SISO and MIMO measurements for FR1 and FR2
• A deep dive into use cases showing how OTA can be effectively used to understand device performance under different conditions using a real device and measurements in a chamber