On-Demand Webinars

Join this webinar as we share several demos and examples of how a precision source/measure unit can reliably measure: Output stability/ Transient response/ Conversion efficiency/ Low quiescent current

Please join Keysight’s power experts for this first webinar of our “All About Power” series. In this webinar, we’ll cover theoretical topics of electrical power.

This webinar will focus on the on the practical aspects of using power supplies and electronic loads in an application. If you’ve ever wanted to optimize your power instrument for your application, then these topics will be of great interest to you.

Don’t miss this exciting launch webinar.

Join us to learn how you can extend the battery life of your IoT devices. Our new hardware and software solution is optimized for battery emulation and profiling, which enables you to quickly perform battery drain analysis at different charge levels. You can also easily perform battery run-down and cycle testing.

A handheld analyzer serves as a very versatile tool in the field. They can help the user to analyze cables and antennas, scan for interference, measure 5G KPIs, and more, but they are only as good as the person who uses them. In this webinar, get to know five key RF measurements well so that one can be prepared for whatever challenges field presents to them: Learn more about Real-time Spectrum Analysis (RTSA), Noise Figure Measurements, Cable and Antenna Tests (CAT), Over-The-Air (OTA) testing, Electromagnetic Field (EMF) Exposure Evaluation etc.

Power semiconductors are essential in power converter design, but data sheets often do not provide sufficient information for the circuit designer. This webinar is targeted at power circuit designers who may not have extensive power semiconductor knowledge, but who would like to understand better how to select the right power semiconductors to meet their converter design needs.

Moving to Level 3 autonomous driving and beyond demands a better, faster way to verify and train your ADAS algorithms. Training these algorithms requires testing against millions of complex radar scenes covering a wide variety of driving scenarios.

Full-scene emulation in the lab is key to developing robust radar target recognition algorithms. Achieving the next level in vehicle autonomy demands robust algorithms trained to interpret radar reflections from automotive radar sensors.

Join this webinar to learn the Keysight solutions that will help address your battery and test challenges, whether you are a device designer or a battery manufacturer.

Key Learnings

• Use cases for battery-powered wireless devices, cell design and manufacturing
  
• Keysight’s readily available solutions to characterize battery performance, optimize battery life, evaluate self-discharge quickly and more

This 5G / 6G Summit webinar provides the latest in advanced wireless communication technologies and trends.

• 6G Trends and Technologies Overview
• 5G 3GPP Rel 17 and 18 updates
• NTN Channel Model and AI/ML for 5G/6G Communication
• Accelerate 5G Private Network Deployment with Automation
• Understanding Regulatory Testing for Wi-Fi 6E and 7 Devices

We will cover O-RAN radio unit (RU) conformance testing and the challenges associated with conducting these tests. In addition, Keysight's O-RU conformance test setup (including O-DU emulation, RF signal sources and analyzers, and Keysight's test automation framework) will be discussed to help you validate O-RAN conformance and performance of the open fronthaul implementation across RF and protocol measurement domains.

We will explore the 3GPP features that enable 5G private networks as well as the challenges posed by testing 5G base station transmitters in private networks. More specifically, we will discuss the best tips and tricks to optimize signal quality (EVM) measurement in 5G private networks and the latest in signal analysis to tackle your testing challenges. An accurate and insightful testing process will help your smart factories prepare, deploy, and operate faster while using network resources more efficiently and accurately.

3GPP release 18 represents a major evolution of the 5G System to be branded as the first release of 5G Advanced. Among other improvements, Rel-18 will include major enhancements in the areas of artificial intelligence and extended reality that will enable highly intelligent network solutions that can support a wider variety of use cases than ever before.

6G research is in its very early stages. Going from100 Gbps to 1 Tbps is a key objective and an active area of research for 6G. However, it poses significant challenges, both from an RF perspective and baseband perspective. How do we make this happen?

O-RAN: The Next Big Thing in Telecom. It's representing mobile communication industry’s move toward an open, virtualized, and disaggregated architecture. O-RAN revolutionizes how mobile network operators (MNOs) can build their radio access networks (RANs) using a multivendor, interoperable, and autonomous supply ecosystem.

Leveraging O-RAN for smaller-scale private and venue networks is of interest to the mobile operators, systems integrators, cloud companies and RAN technology developers. How do we protect the integrity of the networks?

Join the 5G Summit day 2 to find out more.

Accelerate O-RAN Adoption in Next-Gen Mobile Networks

See how Keysight can help you to accelerate the adoption of O-RAN end-to-end.

Open RAN Transformation

In this two-hour event, we will discuss the challenges on the way to O-RAN deployment and how to possibly overcome them.

Join us to learn how the custom, state-of-the-art, chip technology behind our powerful new signal generator will help you continue to innovate in wireless communications and greatly simplify your most complex 5G test setup.

USB4® Version 2.0 specification enables a plug-and-play interface for inter-digital communication, offering significant advantages in bandwidth and data delivery. Learn all about USB4, Version 2.0 from Keysight’s USB expert.

Keysight accelerates innovation with a digital learning platform for educators and students to access industry-ready learning resources through a secure web interface. The digital learning suite platform transforms learning, providing remote access and control to engineering lab resources and tools to visualize, compare, and analyze measurement data.

High-performance computing for embedded system applications is pushing the envelope for speed, a small form-factor, and the right price-point. Designers need to carefully balance material selection and PCB fabrication options, together with smart design strategies for vias, connectors and PCB trace routing. In this webinar we will walk through the simulation process that SECO Italy have undertaken to ensure design success.

Join Keysight principal program manager Rick Eads, member of the PCI-SIG® board of directors, as he discusses the latest PCIe® 6.0 developments and what you need to consider when evaluating your PCIe 6.0 designs.