お探しのページはこちらでしょうか. その他の検索結果:

ハイライト

  • InfiniiMode ： 差動、コモン、シングルエンドモードをスイッチで切り替えて測定できるモードに対応
  • すべてのInfiniiMax III/III+アクセサリおよび新しいQuickTipヘッドで使用可能
  • 各プローブアンプごとに個々の実測Sパラメータを保持。本体接続時に正確なAC補正を実施。
  • Infiniium 90000X/QおよびVシリーズ オシロスコープに直接接続可能（ソフトウェアバージョン5.50以上が必要）

N7000A InfiniiMax III+ 8 GHzプローブアンプは、汎用、高速差動バスのプロービングに最適です。

測定性能およびプローブのユーザビリティを大幅に拡張するInfiniiModeテクノロジーを備え、差動信号のすべての成分を測定できます。1回の接続でInfiniiMax III+本体のスイッチを切り替えることによって、差動信号、シングルエンドA/B信号、差動信号のコモンモード成分を測定できます。

各InfiniiMax III+プローブアンプは、InfiniiMax IIIテクノロジーと同様に、固有のSパラメータを内蔵し、自身の周波数応答データとさまざまなプローブヘッドのSパラメータを使用してプローブの振幅および位相応答をフラットに補正して確度を向上します。個々のプローブアンプの応答を補正することにより、より正確なプローブ補正が可能になり、測定確度を高めることができます。

Extend the Capabilities

アクセサリ
すべてのアクセサリを表示

Featured Resources for N7000A InfiniiMax III+ Series Probe Amplifier, 8 GHz

Application Notes 2021.09.12

Demystifying RCRC and RC Probe

Demystifying RCRC and RC Probe

This paper discusses the advantages of RCRC probes over standard RC probes. It covers input impedance characteristics, and how probe input impedance affects measurements.

2021.09.12

Application Notes 2018.06.20

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Keysight InfiniiMax differential probes are DSP corrected to have a flat magnitude and phase response to provide the highest possible accuracy. The bandwidth chosen to correct to is typically around 3dB non-corrected bandwidth. Usually, extending the bandwidth much beyond that point will increase the noise floor, and if pushed even further, can cause unrealistic noise artifacts. This application note presents the techniques used to extend the bandwidth performance of the InfiniiMax 1169A/B and the N5381A/B solder-in head using the PrecisionProbe application on Infiniium realtime oscilloscope.

2018.06.20

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

Quick Start Guides 2019.01.21

Quick Reference Card for Keysight N7000/1/2/3A InfiniiMax III+ Probes

Quick Reference Card for Keysight N7000/1/2/3A InfiniiMax III+ Probes

This card quickly describes how to use the InfiniiMax III+ probes and compatible browsers and probe heads.

2019.01.21

User Manuals 2015.01.31

Handling Guide for Keysight N7000/1/2/3A InfiniiMax III+ Probes

Handling Guide for Keysight N7000/1/2/3A InfiniiMax III+ Probes

This guide assists you in properly handling your InfiniiMax III+ N7000/1/2/3A probes to prevent damage and maintain high performance.

2015.01.31

Data Sheets 2024.01.01

Infiniium Oscilloscope Probes and Accessories

Infiniium Oscilloscope Probes and Accessories

To get the most out of your Keysight Infiniium oscilloscope, you need the right probes and accessories for your particular applications. Whether you need the high bandwidth and low loading of an active probe, an easy way to connect to surface mount ICs, or a passive probe to measure high voltages, there’s a wide selection of high-quality probes and accessories for your Infiniium oscilloscope. The Infiniium probes and accessories data sheet provides you the overview of all probes and accessories recommended for Infiniium oscilloscopes.

2024.01.01

データシート 2015.01.20

Keysight Technologies InfiniiMax III/III+プローブシステム

Keysight Technologies InfiniiMax III/III+プローブシステム

InfiniiMax III プロービング システムは、今日の高密度 IC および回路基板向けの柔軟な接続ソリューションを使用して、差動信号の測定に利用できる最高のパフォーマンスを提供します。

2015.01.20

User Manuals 2023.02.09

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Series Probes User Guide

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Series Probes User Guide

This guide describes how to set up, configure, and use the InfiniiMax III+ series probes.

2023.02.09

Oscilloscope Probes Selection Guide

Oscilloscope Probes Selection Guide

Keysight offers a broad range of voltage, current, and optical probing solutions for InfiniiVision and Infiniium Series oscilloscopes.
すべてのリソースを表示

すべてのリソースを表示

Want help or have questions?

Contact Us