Choose a country or area to see content specific to your location
-
PRODUCTS AND SERVICES
- Oscilloscopes
-
Analyzers
- Spectrum Analyzers (Signal Analyzers)
- Network Analyzers
- Logic Analyzers
- Protocol Analyzers and Exercisers
- Bit Error Ratio Testers
- Noise Figure Analyzers and Noise Sources
- High-Speed Digitizers and Multichannel DAQ Solutions
- AC Power Analyzers
- DC Power Analyzers
- Materials Test Equipment
- Device Current Waveform Analyzers
- Parameter / Device Analyzers and Curve Tracers
- Meters
- Generators, Sources, and Power Supplies
- Software
- Wireless
- Modular Instruments
- Network Test and Security
- Network Visibility
- Services
- Additional Products
- All Products, Software, Services
- Learn
- Buy
- Support
What are you looking for?
- Home
- Products and Services
- ...
- Instrument Workflow Software
- PathWave X-Series Measurement Applications
- W9077A WLAN 802.11a/b/g/j/p/n/af/ah Measurement Application for CXA [Obsolete]
W9077A WLAN 802.11a/b/g/j/p/n/af/ah Measurement Application for CXA
- Overview and Features
- Post-Purchase Upgrades
- Resources
HIGHLIGHTS
The W9077A is discontinued after June 1, 2019. The replacement models are the N9077EM0D and N9077EM1D X-Series Measurement Applications with KeysightCare.
Signal analysis
- 802.11a/g, 802.11b/g DSSS/CCK/PBCC, 802.11g DSSS-OFDM, 802.11n 20 MHz signals (HT-Mixed, HT-Greenfield, Non-HT), 802.11af and 802.11ah with auto detection
- 802.11p and 802.11j signals with auto detection
- One-button measurements with pass/fail per the standard
- Runs inside the CXA signal analyzer
Measurements
- Swept measurement with time-gated feature: channel power, SEM, OBW
- IQ measurements: Power versus time, CCDF, spectrum flatness, modulation analysis, and more
- Multiple result views: constellation diagram, EVM vs symbol, EVM vs subcarrier, and numeric results display for OFDM signal
- OFDM data burst information, HT-Sig information for 802.11n (MCS 0-7), Signal information for 802.11af and 802.11ah (MCS0-10)
Performance
- EVM floor: up to -48 dB (0.4%) (nominal)
- Power accuracy: up to ±0.61 dB (at 95th percentile)
- Analysis bandwidth: up to 25 MHz
Other features
- License key upgradable
- Fixed and transportable license available
- SCPI remote user interface
The W9077A WLAN measurement application for the CXA is one in a common library of more than 25 measurement applications for the Keysight X-Series signal analyzers, an evolutionary approach to signal analysis that spans instrumentation, measurements and software. The W9077A WLAN measurement application transforms the X-Series signal analyzers into IEEE 802.11 standard-based WLAN transmitter testers by adding fast one-button RF conformance measurements to help you design, evaluate, and manufacture your WLAN transmitter. The measurement application is fully standard compliant to the IEEE 802.11 series standards, helping you thoroughly test your WLAN design with confidence and support manufacturing with a single measurement application that covers 802.11a/b/g/j/p/af/ah and 802.11n (20 MHz bandwidth only).
RF transmitter testing
- Simplified setup with one-button measurements for analysis of time-, frequency-, and modulation-domain characteristics for 802.11a/b/g/j/p/af/ah and 802.11n (20 MHz bandwidth only) WLAN signals
- No bandwidth limitation for swept power measurements with time-gated features such as channel power, spectrum emission mask, occupied bandwidth
- Modulation analysis from the frame to the raw bits. Handles DSSS, CCK, PBCC and OFDM modulation quality with graphical and numeric result displays
- Cross support on X-Series signal analyzers from the high performance PXA to the low cost CXA for manufacturing with the same functionality and user interface
For more information about 802.11 ax devices, please visit 802.11 ax solutions for MIMO, manufacturing, and BBIQ test
- © Keysight Technologies 2000–2024
- Privacy
- Sitemap
- Terms
- Trademark Acknowledgements
- Feedback
- Accessibility