お探しのページはこちらでしょうか. その他の検索結果:

キーサイトは、厳しい使用条件下でも優れた信頼性と耐久性を提供するさまざまなケーブル、ケーブルアセンブリ、リードを提供しています。 キーサイトのGPIBケーブルをご購入になれば、システム全体のコンピューターと測定器の間のシームレスな互換性が確保されます。

アクセサリケーブル

N1027A Accessories for DCA Oscilloscopes Family

N1027A Accessories for DCA Oscilloscopes Family

N1027A is a collection of accessories for mainframes and modules in the 86100 family of Digital Communication Analyzers (DCAs).

N1294A B2900Aシリーズ用SMUアクセサリ

N1294A B2900Aシリーズ用SMUアクセサリ

バナナ-トライアキシャル・アダプタやインターロックケーブルなど、B2900Aシリーズ用のオプションのアクセサリ数点が含まれています

U2921A Cables Accessories for U2700 Series Modular Instruments

U2921A Cables Accessories for U2700 Series Modular Instruments

Connect your instrument to the DUT and PC with U2921A cable accessories.

N9910X Accessories for RF and Microwave Handheld Analyzers

N9910X Accessories for RF and Microwave Handheld Analyzers

N9910X RF and microwave handheld accessories complement Keysight's installation and maintenance test tools.

車載用アダプター

Automotive Adapter AE6952A MATEnet Cable

Automotive Adapter AE6952A MATEnet Cable

AE6952A Automotive MATEnet to MATEnet cable is designed with frequency range from DC to 1 GHz, length of 1m.

Automotive Adapter AE6953A Mini-50 cable

Automotive Adapter AE6953A Mini-50 cable

Automotive Adapter AE6953A Mini 50 cable is designed for Automotive Ethernet MDI interface connections, with frequency range up to 6 GHz, length of 1m.

Automotive Adapter AE6954A H-MTD cable

Automotive Adapter AE6954A H-MTD cable

AE6954A Automotive cable Rosenberger H-MTD cable is designed with frequency range from DC to 10 GHz, length of 1m and can be used for Automotive Ethernet MDI interface connections. Learn more about Automotive MDIs.

ケーブルアダプター

16435A Interlock Cable Adapter

16435A Interlock Cable Adapter

16435A converts the 6-pin interlock connector of the N1294A-011 interlock cable to BNC female output.

N1297A Banana – Triax Adapter For 2-Wire (Non-Kelvin) Connection

N1297A Banana – Triax Adapter For 2-Wire (Non-Kelvin) Connection

The N1297 Series is a collection of banana-triax adapters for the Keysight B2900 Series precision source measure unit (SMU). It consists of both 2-wire as well as 4-wire connection requirements.

N1297B Banana-Triax Adapter for 4‑Wire (Kelvin) Connection

N1297B Banana-Triax Adapter for 4‑Wire (Kelvin) Connection

The N1297 Series is a collection of banana-triax adapters for the Keysight B2900 Series precision source measure unit (SMU). It consists of both 2-wire as well as 4-wire connection requirements.

N1917A P-Series meter cable adapter (1.5 m / 5 feet)

N1917A P-Series meter cable adapter (1.5 m / 5 feet)

The N1917A cable adapter is designed for use with the 8480 and E-Series power sensors, with a P-Series power meter (N1911A or N1912A).

N1917B P-Series meter cable adapter (3.0m / 10 feet)

N1917B P-Series meter cable adapter (3.0m / 10 feet)

The N1917B cable adapter is designed for use with the 8480 and E-Series power sensors with a P-Series power meter (N1911A or N1912A).

N1917C P-Series meter cable adapter (10m / 31 feet)

N1917C P-Series meter cable adapter (10m / 31 feet)

The N1917C cable adapter is designed for use with the 8480 and E-Series power sensors,with a P-Series power meter (N1911A or N1912A).

N1917D P-Series meter cable adapter (1.8m / 6 feet)

N1917D P-Series meter cable adapter (1.8m / 6 feet)

The N1917D cable adapter is designed for use with the 8480 and E-Series power sensors with a P-Series power meter (N1911A or N1912A).

ケーブルアセンブリ

11500A Cable Assembly, Type-N (m) to Type-N (m), DC to 6.0 GHz

11500A Cable Assembly, Type-N (m) to Type-N (m), DC to 6.0 GHz

Offers low reflection, high repeatability, and solid mechanical integrity.

11500B Cable Assembly, Type-N (m) to Type-N (m), DC to 6.0 GHz

11500B Cable Assembly, Type-N (m) to Type-N (m), DC to 6.0 GHz

Offers low reflection, high repeatability, and solid mechanical integrity.

N2823A Cable Assembly, Coaxial Phased-matched Pair, 1 m

N2823A Cable Assembly, Coaxial Phased-matched Pair, 1 m

Extend the cable length of your test fixtures using this 1-m, flexible coax cable assembly with 2.92-mm (m) connectors

N5448B Cable Assembly, Coaxial Phased-matched Pair, 25 cm

N5448B Cable Assembly, Coaxial Phased-matched Pair, 25 cm

Extend the cable length of your test fixtures using this 25-cm, flexible coax cable assembly with 2.92-mm (m) connectors.

Y1740A Cable Assembly

Recommended for Keysight PXI VNA (M983xA/M980xA) or Streamline Series VNAs

ケーブル

11500D Cable, Type-N (m) to Type-N (m), DC to 18 GHz

11500D Cable, Type-N (m) to Type-N (m), DC to 18 GHz

Offers low reflection, high repeatability, and solid mechanical integrity

11500E Cable, 3.5 mm (m) to 3.5 mm (m), DC to 26.5 GHz

11500E Cable, 3.5 mm (m) to 3.5 mm (m), DC to 26.5 GHz

Offers low reflection, high repeatability, and solid mechanical integrity

11501A Cable, Type-N (m) to Type-N (f), DC to 5 GHz

11501A Cable, Type-N (m) to Type-N (f), DC to 5 GHz

Offers low reflection, negligible EMI, high repeatability, and flawless mechanical integrity; 180-cm length

11730F Sensor Cable 61 m / 200 ft

61 m / 200 ft power Sensor cable for 8480 and E-Series power sensors

15443A Matched Cable Pair

15443A Matched Cable Pair

This matched cable pair consists of two cables SMA (m) to SMA (m) which are matched in propagation delay within 25 ps.

16048D 2m BNC Test Cable

16048D 2m BNC Test Cable

Extend the measurement ports from the terminals of the instrument to the DUT

16048G 1m Port Extension Cable for Impedance Analyzer

16048G 1m Port Extension Cable for Impedance Analyzer

Extend the measurement ports from the terminals of the instrument to the DUT

16048H 2m Port Extension Cable for Impedance Analyzer

16048H 2m Port Extension Cable for Impedance Analyzer

Extend the measurement port with a BNC male connector board that allows attachment of user-fabricated test fixtures

16493B BNC Coaxial Cable

16493B BNC Coaxial Cable

16493B is suitable for general and low noise applications for up to 40 V and 200 mA.

34102A Low Thermal Input Cable

34102A Low Thermal Input Cable

Use this 1.2-m shielded, 4-conductor connector only with the 34420A Micro Ohm Meter; terminated in copper spade lugs.

34398A RS-232 Cable, 9 pin (f) to 9 pin (f)

34398A RS-232 Cable, 9 pin (f) to 9 pin (f)

Compatible with Keysight's bench instruments to take the mystery out of RS-232 pinouts

85133C Semi-Rigid Cable, 2.4 mm

85133C Semi-Rigid Cable, 2.4 mm

Achieve phase stability with this 81-cm cable when a DUT is connected, with adapter, directly to the test set port.

85133D Semi-Rigid Cable Set, 2.4 mm

85133D Semi-Rigid Cable Set, 2.4 mm

Achieve phase stability with these 53-cm cables when a DUT is connected between cable ends.

85553A CalPod Drive Cable, 40 GHz, 2 Meter

85553A CalPod Drive Cable, 40 GHz, 2 Meter

Provides the bias voltages and control signals for operation of the 40-GHz CalPod modules.

85554A CalPod Drive Cable Extension, 10 Meter

85554A CalPod Drive Cable Extension, 10 Meter

85554A CalPod Drive Cable (10 meter length) extends the length of CalPod control cables when the distance between the 85523B to the CalPod modules is >2 m.

85555A Splitter Drive Cable, 2 Meter

85555A Splitter Drive Cable, 2 Meter

The 85555A Splitter Drive Cable (2 meter) is used to connect the 85523B CalPod controller to the 85556A CalPod control cable splitter

85556A 1 x 12 Fan Out Cable Splitter

85556A 1 x 12 Fan Out Cable Splitter

Expand one control port of the 85523B CalPod controller to allow control of up to 12 CalPod modules

BT2181A Cable, 2m, DB37(m) to DB37(m) for BT2152B

BT2181A Cable, 2m, DB37(m) to DB37(m) for BT2152B

BT2181A and BT2182A are for 16 measurement channels; connects to DB37(f) on BT2152B rear panel.

BT2182A Cable, 4m, DB37(m) to DB37(m) for BT2152B

BT2182A Cable, 4m, DB37(m) to DB37(m) for BT2152B

BT2181A and BT2182A are for 16 measurement channels; connects to DB37(f) on BT2152B rear panel.

E1739A Sensor Cable, 5 Meter

E1739A Sensor Cable, 5 Meter

The E1739A 5-meter (16 feet) Sensor Cable is used to connect the E1736A USB Sensor Hub to either the E1737A Material Temperature Sensor or the E1738A Air Sensor.

E1739B Sensor Cable, 10 Meter

E1739B Sensor Cable, 10 Meter

The E1739B 10-meter (33 feet) Sensor Cable is used to connect the E1736A USB Sensor Hub to either the E1737A Material Temperature Sensor or the E1738A Air Sensor.

E1739C Sensor Cable, 15 Meter

E1739C Sensor Cable, 15 Meter

The E1739C 15-meter (49 feet) Sensor Cable is used to connect the E1736A USB Sensor Hub to either the E1737A Material Temperature Sensor or the E1738A Air Sensor.

E1739D Sensor Cable, 25 Meter

E1739D Sensor Cable, 25 Meter

The E1739D 25-meter (82 feet) Sensor Cable is used to connect E1736A USB Sensor Hub to either the E1737A Material Temperature Sensor or the E1738A Air Sensor.

N1411A Interlock cable, 4 pin terminal plug to 6 pin circular plug, 1.5 m

N1411A Interlock cable, 4 pin terminal plug to 6 pin circular plug, 1.5 m

Connect the 4-pin interlock plug of B2985A/87A to the 6-pin circular plug.

N1411B Interlock cable, 4 pin terminal plug to 6 pin circular plug, 3 m

N1411B Interlock cable, 4 pin terminal plug to 6 pin circular plug, 3 m

Use to connect the 4-pin interlock plug of B2985A/87A to the 6-pin circular plug

N1415A Triax to Alligator Cable, 200 V, 1.5 m

N1415A Triax to Alligator Cable, 200 V, 1.5 m

Provides easy and convenient current measurements for the B2980B series.

N1427A Low Noise Test Cables For N1413 With B2980 Series, 1.5 m

N1427A Low Noise Test Cables For N1413 With B2980 Series, 1.5 m

Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.

N1427B Low Noise Test Cables for N1413 With B2980 Series, 3 m

N1427B Low Noise Test Cables for N1413 With B2980 Series, 3 m

Easily construct a custom test fixture by converting the terminal configuration with the included connectors.

N2812B InfiniiMax III Cable, 35 GHz

N2812B InfiniiMax III Cable, 35 GHz

Provides excellent flexibility with high quality measurements to match the performance of 90000 X-Series oscilloscope.

N2814A Ultra High Performance Cable, 65 GHz

N2814A Ultra High Performance Cable, 65 GHz

Provides excellent flexibility with high quality measurements to match the performance of 90000 Q-series oscilloscope.

PX0101A BNC to Ferrule Terminal Cable, VOLT:DC 3.3V

PX0101A BNC to Ferrule Terminal Cable, VOLT:DC 3.3V

The cable converting ferrule terminals to BNC terminal.

PX0105A Low Inductance BNC Cable, VOLT:DC 60V

PX0105A Low Inductance BNC Cable, VOLT:DC 60V

The standard BNC cable suitable for narrow current pulse measurement down to 10 μs pulse width.

PX0108A BNC to SMB Cable, VOLT:DC 60V

PX0108A BNC to SMB Cable, VOLT:DC 60V

The cable converting SMB terminal to BNC terminal.

U1173B Handheld Digital Multimeter PC Connectivity Cable

U1173B Handheld Digital Multimeter PC Connectivity Cable

Control your handheld digital multimeter (DMM) from your PC with USB connectivity

U1577A USB2.0 Cable, Type-A Plug to Type-A Plug

U1577A USB2.0 Cable, Type-A Plug to Type-A Plug

Use this USB cable to remotely control the U1610A and U16120A handheld digital oscilloscopes

U2032A Trigger Cable BNC Male to SMB Female 50 ohm, 1.5 m Length

Trigger Cable for Keysight Power Sensors

U2034A LAN Cable, 5 ft (1.5 m)

U2034A LAN Cable, 5 ft (1.5 m)

5 ft / 1.5 m LAN Cable for Keysight LAN power sensors.

U2034C LAN Cable, 16.4 ft (5 m)

U2034C LAN Cable, 16.4 ft (5 m)

16.4 ft / 5 m LAN cable for Keysight LAN power sensors

U2037E TVAC LAN Cable, 100 ft (30.5 m)

100 ft / 30.5 m TVAC LAN Cable for LAN Thermal Vacuum Power Sensors

U2901A Terminal Block and SCSI-II 68 Pin Connector with 1 Meter Cable

U2901A Terminal Block and SCSI-II 68 Pin Connector with 1 Meter Cable

Use this SCSI-II 68-pin connector and 1-meter cable with U2300A and U2500A series USB modular DAQs

U2902A Terminal Block and SCSI-II 68 Pin Connector with 2 Meter Cable

U2902A Terminal Block and SCSI-II 68 Pin Connector with 2 Meter Cable

Use this SCSI-II 68-pin connector and 2-meter cable with U2300A and U2500A series USB modular DAQs

U2903A 1 Meter Long SCSI Cable with 100-Pin Connector

U2903A 1 Meter Long SCSI Cable with 100-Pin Connector

Use this 1-meter long, 100-pin connector with the U2600A Series DAQ

U2904A 2 Meter Long SCSI Cable with 100 Pin Connector

U2904A 2 Meter Long SCSI Cable with 100 Pin Connector

Use this 2-meter long, 100 pin connector with the U2600A Series DAQ

U4201A Logic Analyzer Cable

U4201A Logic Analyzer Cable

The U4201A logic analyzer cable connects to all logic analyzer probes designed for use with 90-pin cable connectors.

U5481B IR to USB PC Connectivity Cable For Handheld LCR/Capacitance/Multifunction Calibrator Meter

U5481B IR to USB PC Connectivity Cable For Handheld LCR/Capacitance/Multifunction Calibrator Meter

Connect easily to your PC from a handheld LCR meter or capacitance for faster data logging

Y1134A Row Expansion Cables for 34934C and 34934T

Y1134A Row Expansion Cables for 34934C and 34934T

Easily configure an expanded matrix using this expansion cable with the 34934C and 34934T terminal blocks

Y1135A 1.5 m 50-pin Dsub Cable

Y1135A 1.5 m 50-pin Dsub Cable

Connect this M/F twisted pair with outer shield cable to 34980A multifunction switch/measure mainframe and modules

Y1136A 3 m 50-pin Dsub Cable

Y1136A 3 m 50-pin Dsub Cable

Connect this m/f twisted pair with outer shield cable to 34980A multifunction switch/measure mainframe and modules

Y1138A 3 m 78-pin Dsub Cable

Y1138A 3 m 78-pin Dsub Cable

Connect this M/F twisted pair with outer shield cable to 34980A multifunction switch/measure mainframe and modules

Y1200B PCIe cable: x1 to x8, 2.0m

Y1200B PCIe cable: x1 to x8, 2.0m

Connect an M9502A/M9505A AXIe chassis or M9018A PXIe chassis with M9021A cable interface to a laptop computer.

Y1202A PCIe Cable: x8, 2.0 m

Y1202A PCIe Cable: x8, 2.0 m

The Y1202A PCIe cable (x8 connectors, 2.0m length) is primarily used to connect a PXIe or AXIe chassis to a desktop or rack-mount computer.

Y1203A PCIe Cable: x8, 0.5 m

Y1203A PCIe Cable: x8, 0.5 m

The Y1203A PCIe cable is used to interconnect PXIe and AXIe chassis in a multi-chassis system, or to connect a PC host card to a PXIe system module.

Y1223A AXIe MultiFrame Cable

Y1223A AXIe MultiFrame Cable

0.5 m cable for connecting multiple AXIe chassis together to form large systems

Y1224A AXIe MultiFrame Cable

Y1224A AXIe MultiFrame Cable

3.0 m cable for connecting multiple AXIe chassis together to form large systems

Y1242A Jumper Cables for Multiport Configuration of M937xA PXI VNA

Y1242A Jumper Cables for Multiport Configuration of M937xA PXI VNA

Use Keysight Y1242A Jumper Cables for multiport configuration of the M937xA PXI Vector Network Analyzer (VNA).

Y1245A Single-Site (16 Channels) Signal Cable, 0.5 meter

Y1245A Single-Site (16 Channels) Signal Cable, 0.5 meter

Use to connect 16 digital channels, 16 PPMU sense channels, 4 high-voltage channels, and 4 open-drain/ground channels.

Y1246A Single-Site (16 Channels) Signal Cable, 1 meter

Y1246A Single-Site (16 Channels) Signal Cable, 1 meter

Use to connect 16 digital channels, 16 PPMU sense channels, 4 high-voltage channels, and 4 open drain/ground channels.

Y1247A Single-Site (16 Channels) Signal Cable, 2 meter

Y1247A Single-Site (16 Channels) Signal Cable, 2 meter

Use to connect 16 digital channels, 16 PPMU sense channels, 4 high-voltage channels, and 4 open drain/ground channels.

Y1248A Multi-Site (4 Sites of 4 Channels) Signal Cable, 1 meter

Y1248A Multi-Site (4 Sites of 4 Channels) Signal Cable, 1 meter

Use to connect 16 channels divided into 4 independent partitions (connectors).

Y1249A Multi-Site (4 Sites of 4 Channels) Signal Cable, 2 Meter

Y1249A Multi-Site (4 Sites of 4 Channels) Signal Cable, 2 Meter

Use to connect 16 channels divided into 4 independent partitions (connectors)

Y1250A Four Module Sync Cable

Y1250A Four Module Sync Cable

Required when synchronizing multiple (up to four) M9195B PXIe DSR modules

Y1251A Twelve Module Sync Cable

Y1251A Twelve Module Sync Cable

Required when synchronizing multiple (up to twelve) M9195B PXIe DSR modules

Y1252A Adjustment Cable

Y1252A Adjustment Cable

Includes three cable assemblies necessary for voltage and current adjustments of the M9195A/B DSR module

Y1254A SMA Breakout Cables, 1 Meter

Y1254A SMA Breakout Cables, 1 Meter

Use to access individual signal pins/channels for prototyping or debugging

Y1255A SMA Breakout cables, 2 meter

Y1255A SMA Breakout cables, 2 meter

Use to access individual signal pins/channels for prototyping or debugging

Y1262A DisplayPort cable for Embedded Controllers

Y1262A DisplayPort cable for Embedded Controllers

Y1262A DisplayPort cable for embedded controllers, connect a DisplayPort connection to a monitor; compatible with M9037A and M9537A

Y1282A Connection Cable for N9069A Noise Figure Measurement Application

Y1282A Connection Cable for N9069A Noise Figure Measurement Application

Connects the 346 or SNS series noise sources to the M9290A CXA-m PXIe signal analyzer for noise figure measurement.

M980xA PXI VNAのマルチポート構成用Y1730A ジャンパーケーブル

M980xA PXI VNAのマルチポート構成用Y1730A ジャンパーケーブル

複数のM980xAおよびM983xAモジュールを接続することにより、テストポート数を増やします。

Z5623A-K20 3.5 mm (m) to (m) RF Cable, 36 inches

RF Cable for Keysight Vector Network Analyzers

フレキシブルケーブル

85133E Flexible Cable, 2.4 mm

85133E Flexible Cable, 2.4 mm

Achieve phase stability with this 97-cm cable when a DUT is connected, with adapter, directly to the test set port.

85133F Flexible Cable Set, 2.4 mm

85133F Flexible Cable Set, 2.4 mm

Achieve phase stability with these 63-cm cables when a DUT is connected between cable ends.

85133H Flexible Cable, 2.4 mm

85133H Flexible Cable, 2.4 mm

Achieve phase stability with this 63-cm cable featuring a 2.4-mm female to 2.4-mm male connector.

85134E Flexible Cable, 2.4 mm to 3.5 mm

85134E Flexible Cable, 2.4 mm to 3.5 mm

Achieve phase stability with this 97.2-cm cable when a DUT is connected, with adapter, directly to the test set port.

85134F Flexible Cable Set, 2.4 mm to 3.5 mm

85134F Flexible Cable Set, 2.4 mm to 3.5 mm

Achieve phase stability with these 62.9-cm cables when a DUT is connected between cable ends.

85134H Flexible Cable, 2.4 mm to 3.5 mm

85134H Flexible Cable, 2.4 mm to 3.5 mm

Achieve phase stability with this 62.9-cm cable featuring a 2.4-mm female to 3.5-mm male connector.

85135E Flexible Cable, 2.4 mm to 7 mm

85135E Flexible Cable, 2.4 mm to 7 mm

Achieve phase stability with this 97.2-cm cable when a DUT is connected, with adapter, directly to the test set port.

85135F Flexible Cable Set, 2.4 mm To 7 mm

85135F Flexible Cable Set, 2.4 mm To 7 mm

Achieve phase stability with these 62.9-cm cables when a DUT is connected between cable ends.

N4697J Flexible Test Cable, 1.85 mm

N4697J Flexible Test Cable, 1.85 mm

Use this 96.5-cm cable when a DUT is connected, with adapter, directly to the test set port

N4697K Flexible Test Cable Set, 1.85 mm

N4697K Flexible Test Cable Set, 1.85 mm

Use these 62.9-cm cables when a DUT is connected between cable ends

GPIBケーブル

10833A GPIB Cable, 1 meter

10833A GPIB Cable, 1 meter

Connect GPIB instruments easily to your PC with this 1-m cable for fast and seamless integration

10833B GPIB Cable, 2 meter

10833B GPIB Cable, 2 meter

Connect GPIB instruments easily to your PC with this 2-m cable for fast and seamless integration

10833C GPIB Cable, 4 meter

10833C GPIB Cable, 4 meter

Connect GPIB instruments easily to your PC with this 4-m cable for fast and seamless integration

10833D GPIB Cable, 0.5 Meter

10833D GPIB Cable, 0.5 Meter

Connect GPIB instruments easily to your PC with this 0.5-m cable for fast and seamless integration.

10833F GPIB Cable, 6 Meter

10833F GPIB Cable, 6 Meter

Connect GPIB instruments easily to your PC with this 6-m cable for fast and seamless integration.

10833G GPIB Cable, 8 Meter

10833G GPIB Cable, 8 Meter

Connect GPIB instruments easily to your PC with this 8-m cable for fast and seamless integration.

Y1260A Micro GPIB Cable for Embedded Controllers and PXIe System Modules 

Y1260A Micro GPIB Cable for Embedded Controllers and PXIe System Modules 

Connect a MicroD25 GPIB to a standard GPIB connection; compatible with the M9037A, M9537A, and M9024A

キット

16195B Calibration Kit, 7 mm

Calibration kit for Keysight RF LCR meters, impedance / material analyzers, and network analyzers

3446ACCU Upgrade - Accessory Kit for 34460A - Test Leads, USB Cable

3446ACCU Upgrade - Accessory Kit for 34460A - Test Leads, USB Cable

3446ACCU provides the accessory kit for the 34460A, including the test leads and USB cable.

N1410A Starter kit for B2985/B2987

N1410A Starter kit for B2985/B2987

Includes cable (N1415A) and adapter (N1414A) set for easy and convenient measurements with B2985A/B2987A.

N2755A MSO Cable Kit, 8-Channel

N2755A MSO Cable Kit, 8-Channel

N2755A is a low-cost 8-channel MSO cable kit allows you to easily probe far-apart pins. It includes flying lead cable, 3 right-angle grounds, 3 ground extenders.

N2756A MSO Cable Kit, 16-Channel

N2756A MSO Cable Kit, 16-Channel

Easily probe far-apart pins; includes flying lead cable, 5 right-angle grounds, 5 ground extenders, and 18 grabbers

N5476A InfiniiMax III Browser Replacement Tips (Kit of 4)

N5476A InfiniiMax III Browser Replacement Tips (Kit of 4)

Replacement browser probe tips for the N5445A browser head

N9311X RF and Microwave Accessory Kit

N9311X RF and Microwave Accessory Kit

N9311X RF and Microwave Accessory Kit complements Keysight's low-cost handheld and benchtop solutions. Select the accessories for your measurement needs.

U1161A Extended Test Lead Kit

U1161A Extended Test Lead Kit

Includes one black and one red lead, two test probes, alligator clips, and 4 mm banana plugs

U1168A Standard Test Lead Kit

U1168A Standard Test Lead Kit

Compatible with the U1230/40/50/70 handheld DMMs; includes test leads, test probes, alligator clips, and SMT and mini grabbers.

U1168B Standard Test Lead Kit

U1168B Standard Test Lead Kit

Get started on all your troubleshooting tasks with this complete set of DMM probes with leads, clips, and grabbers

U8201A Combo Test Lead Kit

U8201A Combo Test Lead Kit

Designed for use with U3606A DMM | DC power supply; includes leads, probes, alligator clips, SMT grabbers, and banana plugs.

U8202A Electronic Test Lead Kit

U8202A Electronic Test Lead Kit

Designed for use with the U3606A DMM and DC power supply; includes leads, alligator clips, mini grabbers, and more.

Y1243A Cable Kit for M9301A LO Distribution

Y1243A Cable Kit for M9301A LO Distribution

Y1243A Cable Kit for M9301A local oscillator (LO) distributes 4 LO output signals from the M9301A PXIe synthesizer to up to 4 channels within one chassis.

Y1244A Cable Kit for Synchronizing Two M9018A PXIe Chassis

Y1244A Cable Kit for Synchronizing Two M9018A PXIe Chassis

The Y1244A Cable Kit is used with M9381A PXIe vector signal generator and M9391A PXIe vector signal analyzer to synchronize two M9018A PXIe chassis.

Y1157A 9 to 10-pin cable kit for Y1150A, Y1152A, Y1154A

Y1157A 9 to 10-pin cable kit for Y1150A, Y1152A, Y1154A

Kit comes with supplies to build 4 cables for Y1150A, Y1152A, and Y1154A

Y1158A 10 to 10 / 10 to 14-pin cable kit for Y1153A, Y1154A

Y1158A 10 to 10 / 10 to 14-pin cable kit for Y1153A, Y1154A

Kit comes with supplies to build 2 cables for Y1153A and Y1154A

Y1159A 16-to-16 pin cable kit for Y1150A/51A/52A/53A/54A/55A

Y1159A 16-to-16 pin cable kit for Y1150A/51A/52A/53A/54A/55A

Kit comes with supplies to build 2 cables for Y1150A/51A/52A/53A/54A/55A

レーザー・ヘッド・ケーブル

5519A HeNe Laser System with Built in Receiver and Power Supply

5519A HeNe Laser System with Built in Receiver and Power Supply

The Keysight 5519A is used primarily in machine tool calibrator systems where the velocity of motion is slower. The laser head has a receiver built in. Uses AC power input.

5519B HeNe Laser System with Built in Receiver and Power Supply

5519B HeNe Laser System with Built in Receiver and Power Supply

The Keysight 5519B is used primarily in machine tool calibrator systems where the velocity of motion is slower. The laser head has a receiver built in. Uses AC power input.

10881A Laser Head Cable, 3 m

10881A Laser Head Cable, 3 m

Provide reliable power with this five-pin female DIN that connects the laser head to multiple laser boards.

10881B Laser Head Cable, 7 m

10881B Laser Head Cable, 7 m

Provide reliable power with this five-pin female DIN that connects the laser head to multiple laser boards.

10881C Laser Head Cable, 20 m

10881C Laser Head Cable, 20 m

Provide reliable power with this five-pin female DIN that connects the laser head to multiple laser boards.

10881D Laser Head Cable, 3 m

10881D Laser Head Cable, 3 m

Provide reliable power with this spade lug that connects the laser head to multiple laser boards.

10881E Laser Head Cable, 7 m

10881E Laser Head Cable, 7 m

Provide reliable power with this spade lug that connects the laser head to multiple laser boards.

10882A Laser Head Cable, 3-meter

10882A Laser Head Cable, 3-meter

3 meter Laser head cable used to connect the 5519A/B Laser Head to the E1735A USB Axis Module.

10882B Laser Head Cable, 7-meter

10882B Laser Head Cable, 7-meter

7 meter Laser head cable used to connect the 5519A/B Laser Head to the E1735A USB Axis Module.

10882C Laser Head Cable, 20-meter

10882C Laser Head Cable, 20-meter

20 meter Laser head cable used to connect the 5519A/B Laser Head to the E1735A USB Axis Module.

E1847A Laser Head Cable, power only, spade lugs

E1847A Laser Head Cable, power only, spade lugs

Integrate receivers with your power supply using this #6 Spade lug connector to the laser head

E1848A Laser Head Cable, power only, male DIN

E1848A Laser Head Cable, power only, male DIN

Integrate receivers with your power supply using this 5-pin male DIN to connect the laser head to the N1225A axis board

E1848B Laser Head Cable, power only, female DIN

E1848B Laser Head Cable, power only, female DIN

Integrate receivers with 10884B power supply using this 5-pin female DIN to connect the laser head to the N1225A axis board

N1251B High Performance Laser Head Cable, 7 m

N1251B High Performance Laser Head Cable, 7 m

Minimize errors for dynamic measurements with this 5-pin female DIN that connects our 100884B power supply to the laser head

リード

16048A Test Lead, BNC Connector to BNC Connector Board

16048A Test Lead, BNC Connector to BNC Connector Board

Extend the measurement port with a four-terminal-pair configuration that enables the attachment of user-fabricated test fixtures.

16048E Test Leads

16048E Test Leads

Extend the measurement port with a 4-terminal-pair configuration that allows attachment of user-fabricated test fixtures

16089A Large Kelvin Clip Lead

16089A Large Kelvin Clip Lead

Measure odd-shaped components that you cannot measure using conventional fixtures

16089B Medium Kelvin Clip Lead

16089B Medium Kelvin Clip Lead

Measure odd-shaped components that you cannot measure using conventional fixtures

16089C Kelvin IC Clip Lead

16089C Kelvin IC Clip Lead

Measure odd-shaped components that you cannot measure using conventional fixtures

34133A Precision Electronic Test Leads

34133A Precision Electronic Test Leads

Use these small, light weight, leads with small components and dense circuit boards.

34137A Deluxe test lead set for the 3458A

34137A Deluxe test lead set for the 3458A

Set includes 2 retractable sheaths, 2 fine tip probes, 2 SMT grabbers, and 1 mini grabber; works with the 3458A DMM

34138A Test Lead Set

34138A Test Lead Set

Contains fixed sheath banana plugs, retractable sheath probes, fine tip probes, and grabbers

E5381B Differential Flying Leads with 90-Pin Cable Connector

E5381B Differential Flying Leads with 90-Pin Cable Connector

E5381B flying lead set acquire signals from randomly located points in your target, and measure signals with ≥ 200 mV Vmax-Vmin signal amplitude.

E5382B Single-Ended Flying Leads with 90-Pin Cable Connector

E5382B Single-Ended Flying Leads with 90-Pin Cable Connector

E5382B Single-Ended Flying Leads acquire signals from randomly located points in your target, and measure signals with ≥ 250 mV p-p signal amplitude.

E5383B Single-Ended Flying Leads With 40-Pin Cable Connector

E5383B Single-Ended Flying Leads With 40-Pin Cable Connector

E5383B Single-Ended Flying Leads acquire signals from randomly located points in your target, and measure signals with ≥ 600 mV p-p signal amplitude.

N1425A Low Noise Test Leads for N1413 with B2980 Series, 1.5m

N1425A Low Noise Test Leads for N1413 with B2980 Series, 1.5m

Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.

N1425B Low Noise Test Leads for N1413 with B2980 Series, 3m

N1425B Low Noise Test Leads for N1413 with B2980 Series, 3m

Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.

U1169A Test Probe Leads, with 19-mm Tips and 4-mm Tips

U1169A Test Probe Leads, with 19-mm Tips and 4-mm Tips

Use with handheld DMMs; consists of insulated test leads, 19-mm-tips test probes, and 4-mm tips test probes

U1580A DMM Terminal Test Lead

U1580A DMM Terminal Test Lead

Compatible with the U1600A series handheld digital oscilloscope probes and test leads

U1781A Alligator Clip Leads

U1781A Alligator Clip Leads

The Keysight U1781A is to be used with the U1700 Series Handheld Capacitor and LCR meters. These clips are shipped as standard with every handheld capacitor or handheld LCR meter.

U4203A Single-Ended 34-Channel Flying Lead

U4203A Single-Ended 34-Channel Flying Lead

Use this general purpose, flying lead probe with 16850A Series portable logic analyzers

U4324A PCIe 3.0 Flying Lead Solder Down Probe

U4324A PCIe 3.0 Flying Lead Solder Down Probe

Provides signal capture when no PCIe slot connector or PCIe standard mid bus footprint is available

パワー・センサ・ケーブル

11730A Power Sensor / SNS Noise Source Cable (1.5m / 5 feet)

11730A Power Sensor / SNS Noise Source Cable (1.5m / 5 feet)

Reduce RFI effects on low power readings with this cable's improved shielding design.

11730B Power Sensor / SNS Noise Source Cables (3 m/10 feet)

11730B Power Sensor / SNS Noise Source Cables (3 m/10 feet)

Reduce RFI effects on low power readings with this cable's improved shielding design.

11730C Power Sensor / SNS Noise Source Cable (6.1 m/20 feet)

11730C Power Sensor / SNS Noise Source Cable (6.1 m/20 feet)

Reduce RFI effects on low power readings with this cable's improved shielding design.

11730D Power Sensor Cable (15.2 m/50 feet)

11730D Power Sensor Cable (15.2 m/50 feet)

The Keysight 11730A/B/C/D/E cables are used with the N8480/8480 and E-series power sensors (except the E9320 family of peak and average sensors).

11730E Power Sensor Cable (30.5 m / 100 feet)

11730E Power Sensor Cable (30.5 m / 100 feet)

The Keysight 11730A/B/C/D/E cables are used with the N8480/8480 and E-series power sensors (except the E9320 family of peak and average sensors).

E9288A Power Sensor Cable, 1.5 m

E9288A Power Sensor Cable, 1.5 m

The E9288A power sensor cable (blue) must be used with the E9320 family of peak and average power sensors, and is also compatible with all 8480 and E-series sensors.

E9288B Power Sensor Cable, 3.0 m

E9288B Power Sensor Cable, 3.0 m

The E9288B power sensor cable (blue) must be used with the E9320 family of peak and average power sensors, and is also compatible with all 8480 and E-series sensors.

E9288C Power Sensor Cable, 10m

E9288C Power Sensor Cable, 10m

The E9288C power sensor cable (blue) must be used with the E9320 family of peak and average power sensors, and is also compatible with all 8480 and E-series sensors.

U2031A Power Sensor Cable, 1.5m

U2031A Power Sensor Cable, 1.5m

The U2031A sensor cable is compatible with the Keysight USB power sensors.

U2031B Power Sensor Cable, 3m

U2031B Power Sensor Cable, 3m

The U2031B sensor cable is compatible with the Keysight USB power sensors.

U2031C Power Sensor Cable, 5m

U2031C Power Sensor Cable, 5m

The U2031C sensor cable is compatible with the Keysight USB power sensors.

レシーバーケーブル

10790B Receiver Cable, 10 m

10790B Receiver Cable, 10 m

Perform a quick and accurate installation with this cable that connects to multiple measurement electronics.

10880A Receiver Cable, 5 m

10880A Receiver Cable, 5 m

Minimize measurement errors with this cable that connects to PCI or VME axis boards.

10880B Receiver Cable, 10 m

10880B Receiver Cable, 10 m

Minimize measurement errors with this cable that connects to PCI or VME axis boards.

10880C Receiver Cable, 20 m

10880C Receiver Cable, 20 m

Minimize measurement errors with this cable that connects to PCI or VME axis boards.

N1250A High Performance Receiver Cable, 5 M

N1250A High Performance Receiver Cable, 5 M

Achieve high performance with this cable that connects the measurement signal from an external receiver to an axis board.

N1250B High Performance Receiver Cable, 10 M

N1250B High Performance Receiver Cable, 10 M

Achieve high performance with this cable that connects the measurement signal from an external receiver to an axis board.

N1250F High Performance Receiver Cable,

N1250F High Performance Receiver Cable,

Achieve high performance with this cable that connects the measurement signal from an external receiver to an axis board

N1250E High Performance Receiver Cable, 12 M

N1250E High Performance Receiver Cable, 12 M

Achieve high performance with this cable that connects the measurement signal from an external receiver to an axis board.

テスト・ポート・ケーブル

11500I Test Port Cable, 1 mm

11500I Test Port Cable, 1 mm

Connect test ports to devices, fixtures, or probe tips with this 8.8-cm cable featuring a return loss of 17 dB minimum.

11500J Test Port Cable, 1 mm

11500J Test Port Cable, 1 mm

Connect test ports to devices, fixtures, or probe tips with this 16-cm cable featuring a return loss of 17 dB minimum.

11500JK10 110 GHz, 1.0 mm (m-f) Test Port Cable 10 cm

Connect test ports to devices, fixtures, or probe tips with this 10-cm cable

11500K Test Port Cable, 1 mm

11500K Test Port Cable, 1 mm

Connect test ports to devices, fixtures, or probe tips with this 20-cm cable featuring a return loss of 16 dB minimum

11500L Test Port Cable, 1 mm

11500L Test Port Cable, 1 mm

Connect test ports to devices, fixtures, or probe tips with this 24-cm cable featuring a return loss of 16 dB minimum.

11857Bテスト・ポート・ケーブル、N型、75 Ω

11857Bテスト・ポート・ケーブル、N型、75 Ω

精密な61 cmケーブル2本（1.3 GHzで2度以内に位相整合）を同梱

11857Dテスト・ポート・ケーブル、APC-7、50 Ω

11857Dテスト・ポート・ケーブル、APC-7、50 Ω

精密な61 cmケーブル2本（1.3 GHzで2度以内に位相整合）を同梱

85131C Semi-Rigid Cable, 3.5 mm (Test Port) to 3.5 mm

85131C Semi-Rigid Cable, 3.5 mm (Test Port) to 3.5 mm

Achieve phase stability with this 81-cm cable when a DUT is connected, with adapter, directly to the test set port

85131D Semi-Rigid Cable Set, 3.5 mm (Test Port) To 3.5 mm

85131D Semi-Rigid Cable Set, 3.5 mm (Test Port) To 3.5 mm

Achieve phase stability with these 53-cm cables when a DUT is connected between cable ends.

85131E Flexible Cable, 3.5 mm (Test Port) To 3.5 mm

85131E Flexible Cable, 3.5 mm (Test Port) To 3.5 mm

Achieve phase stability with this 96.5-cm cable when a DUT is connected, with adapter, directly to the test set port.

85131F Flexible Cable Set, 3.5 mm (Test Port) To 3.5mm

85131F Flexible Cable Set, 3.5 mm (Test Port) To 3.5mm

Achieve phase stability with these 62.2-cm cables when a DUT is connected between cable ends.

85131G Semi-Rigid Cable, 3.5 mm (Test Port) To 3.5 mm

85131G Semi-Rigid Cable, 3.5 mm (Test Port) To 3.5 mm

Achieve phase stability with this 53-cm cable featuring a 3.5-mm female to 3.5-mm male connector.

85131H Flexible Cable, 3.5 mm (Test Port) To 3.5 mm

85131H Flexible Cable, 3.5 mm (Test Port) To 3.5 mm

Achieve phase stability with this 62.2-cm cable featuring a 3.5-mm female to 3.5-mm male connector.

85132E Flexible Cable, 3.5 mm (Test Port) To 7 mm

85132E Flexible Cable, 3.5 mm (Test Port) To 7 mm

Achieve phase stability when using this 97.2-cm cable with reflection/transmission test sets.

85132F Flexible Cable Set, 3.5 mm (Test Port) to 7 mm

85132F Flexible Cable Set, 3.5 mm (Test Port) to 7 mm

Achieve phase stability when using these 62.9-cm cables with full S-parameter test sets

N6314A Test Port Cable, Type-N, 50 ohm

N6314A Test Port Cable, Type-N, 50 ohm

Provides the shielded RF connections required when using network analyzers with various test devices and equipment

N6315A Test Port Cable, Type-N, 50 ohm

N6315A Test Port Cable, Type-N, 50 ohm

Provides the shielded RF connections required when using network analyzers with various test devices and equipment

チップ

N5440A InfiniiMax III 28 GHz Ceramic ZIF Tips

N5440A InfiniiMax III 28 GHz Ceramic ZIF Tips

InfiniiMax III Zero Insertion Force (ZIF) Probe Tips

トライアキシャルケーブル

16493L Triaxial Cable

16493L Triaxial Cable

16493L can be used as a general purpose triaxial cable for high current applications up to 4.2 A DC and 200 V. It can also be used for low current applications down to the sub-pA level.

16494A Triaxial Cable

16494A Triaxial Cable

16494A is suitable for low current applications down to the sub fA level. It supports a maximum voltage/current of 200 V / 1A DC.

PX0102A Low Noise Triaxial Cable

PX0102A Low Noise Triaxial Cable

The standard triaxial cable suitable for low current measurement down to the sub fA level.

PX0103A Triaxial to SMB Cable, VOLT:DC 210V

PX0103A Triaxial to SMB Cable, VOLT:DC 210V

The cable converting SMB terminal to triaxial terminal.

N1412A Triaxial Cable, 500 V, 1.5 m

N1412A Triaxial Cable, 500 V, 1.5 m

Use this 500 V cable to prevent leakage current when performing ultra low current measurement (< 1 nA).

N1412B Triaxial Cable, 500 V, 3 m

N1412B Triaxial Cable, 500 V, 3 m

Use this 500 V cable to prevent leakage current when performing ultra low current measurement (< 1 nA).

N1412C Triaxial Cable, 500 V, 6 m

N1412C Triaxial Cable, 500 V, 6 m

Use this 500 V cable to prevent leakage current when performing ultra low current measurement (< 1 nA).

その他のケーブル、ケーブルアセンブリ、リード

10884B Power Supply

The Keysight 10884B Power Supply converts AC power into ±15V power to operate a single Keysight laser head and the multiple Keysight receivers that make up a Keysight laser transducer or laser calibrator system.

11059A Kelvin Probe Set

11059A Kelvin Probe Set

Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces

E1735A USB Axis Module

E1735A USB Axis Module

Small and light weight, the Keysight E1735A USB Axis Module allows users to interface the laser, remote control, and optional A Quad B input cable to any PC.

N1298A High Current Ultra Low Noise Filter, 21 V/500 mA, 10 Ω

N1298A High Current Ultra Low Noise Filter, 21 V/500 mA, 10 Ω

The N1298A Series is a collection of low noise filters for the Keysight B2960 Series 6.5-digit low noise source.

N1298B Ultra Low Noise Filter, 42 V/105 mA, 50 Ω

N1298B Ultra Low Noise Filter, 42 V/105 mA, 50 Ω

The N1298 Series is a collection of low noise filters for the Keysight B2960 Series 6.5-digit low noise source.

N1298C Low Noise Filter, 210 V/3 A

N1298C Low Noise Filter, 210 V/3 A

The N1298 Series power source accessories are a collection of low noise filters for the Keysight B2960 Series precision source / measure units (SMUs).

N1426A Pin Probes For N1425

N1426A Pin Probes For N1425

Measure high resistance of small DUTs such as PC boards or IC sockets with the N1425.

N1426B Soldering Sockets For N1425

N1426B Soldering Sockets For N1425

Construct simple custom-made test leads that support voltage up to 1,000 V.

U1163A SMT Grabbers

U1163A SMT Grabbers

Use with standard test leads and handheld digital multimeters (DMMs) and clamp meters

U1782B SMD Tweezer

U1782B SMD Tweezer

Use with the U1700 handheld capacitor and handheld LCR meter to easily measure SMD-type components

すべてのケーブル、ケーブルアセンブリ、リードを表示

ご要望、ご質問はございませんか。

お問い合わせはこちら