N6705A/B Firmware Revision History

D.02.13:

•	Adds trigger SCPI TRIGger:MEASure:TALign:CORRection[:STATe] bool,(@clist) command to enable improved alignment of N6781A, N6782A and N6784A current measurements with external trigger.
•	Increased the number of VXI-11 connections accepted from 3 to 4.
•	Fixed bugs

D.02.08:
•	Adds support for N6785A and N6786A SMUs.
•	Fixed bugs.

D.01.09:
•	Fixed bugs.

D.01.08:
•	Adds power measurements over the SCPI interface.
•	Adds the ability to simultaneously measure 8 parameters using the SCPI interface by changing the time interval for measurements from 20 microseconds to 40 microseconds.

D.01.07:
•	Added support for N6755A, N6756A, N6763A, N6764A, N6765A, N6766A, and N6777A modules.

D.01.02:
•	Adds support for N6784A Source/Measure Unit
•	Adds voltmeter emulation mode for N678xA SMU Modules
•	Adds current priority slew for N678xA SMU modules
 
D.00.03:
•	Adds support for N6781A and N6782A Source/Measure Units (SMUs)

C.02.01:
•	Adds support for the N6705B mainframe
•	Adds support for the N6753A module in the N6705B mainframe only
•	Adds support and licensing for the 14585A software

C.00.09:
•	Adds Power Line Cycle (PLC) integration time control to Meter View
•	Extends On/Off time delay from 1sec to 1000sec
•	Adds Constant Dwell Arb (CD Arbs)
•	Adds faster Scope View measurements – 10 us sample rate for 2 traces
•	Adds deeper Scope View Measurement Buffer

B.00.01:
•	Adds *LRN? learn string query
•	Adds self-test errors persisting on the front panel

A.xx.xx:
•	Added support for 2UA option to the N6761A and N6762A
•	Adds the ability to group (parallel) from 2 to 4 outputs to act as a single output
•	Adds Power traces to the Scope and Data Logger
•	Initial release of firmware, April 2007