Signal Generator Basics Bootcamp

Join Keysight engineers to explore best practices for signal generator optimization. They'll guide you through the latest standards and emerging engineering challenges, with insights to help you stay ahead of the curve. By the end of this bootcamp, you will learn some best practices for signal generator optimization and navigating the complexities of RF testing. Learn: How to increase amplitude accuracy for flatness correction and external leveling Methods to optimize wide bandwidth signal performance, switching speed, and phase noise profile Complexities of RF testing and performance impacts on receiver testing using M9484C VXG This bootcamp is ideal for RF engineers or anyone looking to gain a deeper understanding of signal generator optimization and RF testing.

Deep Dive on Oscilloscopes Bootcamp

Dive deeper into oscilloscopes with Keysight engineers. This bootcamp guides you through the essential capabilities of benchtop oscilloscopes with demonstrations and step-by-step guidance you can start applying in your lab today. By the end of this course, you will be able to configure your oscilloscope and thoroughly test your electrical devices. Learn: Oscilloscope setup and probing tips that will save you time in the lab Advanced oscilloscope measurement capabilities that will give you insight into your device under test How to use an InfiniiVision X-Series oscilloscope This bootcamp is ideal for test engineers and anyone looking to gain a deeper understanding of oscilloscopes.

Design with 5G NTN System Simulation and Emulation

Learn how to use the RF System Designs for modeling and simulation of non-terrestrial networks (NTNs). See demonstrations of both Simulation and Network Emulation, another key component in the Keysight NTN Development Ecosystem. Learn: How to model an end-to-end transmission path and apply theoretical concepts in real-world scenarios. How our digital twin technology transforms antenna design, which is crucial for extending 5G to non-terrestrial networks. How to succeed in moving from a terrestrial to a hybrid space / ground network with virtual simulation, emulation, and digital twin technology. This bootcamp is ideal for RF System engineers, and anyone looking to gain a deeper understanding of 5G NTN Simulation and Emulation.

RF Field Testing Basics Bootcamp

Join Keysight engineers for an in-depth exploration of RF field testing. They'll guide you through RF basics with insights to help you stay ahead of the curve. By the end of this bootcamp, you will understand the fundamentals behind RF test measurements and how they can be used practically in field applications. Learn: How to perform Distance-To-Fault measurements in order to identify cable faults Methods for continuous channel scanning for RF power measurement Techniques for spectrum analysis in the field using an antenna This bootcamp is ideal for field operators, RF engineers, and anyone looking to gain a deeper understanding of RF field testing and practical measurement techniques.

Radar Fundamentals for Electromagnetic Spectrum Operations Bootcamp

Keysight experts will guide you through the essential principles and advanced techniques of radar system design and measurement. Begin with foundational radar concepts, including system components and the radar range equation, then progress to sophisticated signal processing methods like pulse compression and FMCW radar. Finally, explore the impact of probe loading on oscilloscope measurements and how to ensure accuracy in radar signal capture. This course blends theoretical insights with practical application notes to prepare you for the challenges of modern electromagnetic spectrum operations. Learn: Understand radar system fundamentals and the radar range equation Apply advanced signal processing techniques to enhance radar performance Ensure measurement accuracy through proper oscilloscope and probe practices This bootcamp is ideal for engineers, researchers, and defense professionals seeking advanced radar, EW, and signal measurement expertise.

Fundamentals of Breach and Attack Simulation

Dive deeper into adversarial exposure validation (AEV) with Keysight engineers. This course guides you through essential AEV principles, powered by breach and attack simulation (BAS). Included are demonstrations and step-by-step guidance you can start applying in your lab today. By the end of this course, you will be able to assess your security posture, configure simulation tools in your tool stack, and validate your defenses with precision.  Learn:  How to deploy and configure adversarial exposure validation tools using breach and attack simulation  How to execute data exfiltration assessments and validate defenses like WAFs  How to operationalize AEV workflows across hybrid environments  This bootcamp is ideal for security engineers, DevSecOps professionals, or anyone looking to gain a deeper understanding of security validation and posture analysis using adversarial exposure validation and breach and attack simulation. 

Building 1.6T AI Data Centers

Join Keysight engineers for an in-depth bootcamp for network architects building AI infrastructure at 1.6T speeds. Through real-world demos and step-by-step guides, explore innovative solutions to validate AI data centers with full-stack visibility, stress-test 1.6TE interconnect performance from Layers 1 - 3 1.6TE interconnect performance and ensure transceiver reliability and interoperability under realistic AI traffic conditions. This content can help maximize AI network performance and minimize GPU idle time in your next upgrade. Learn:  Emulate realistic AI workloads to test every data path in your system.  Validate 1.6T interconnect performance, stability, and multi-vendor interoperability.  Scale 1.6T transceiver manufacturing tests with advanced optical sensitivity and higher TDECQ accuracy.  This bootcamp is ideal for network architects and engineers focused on optimizing throughput, performance, and scalability for next-gen AI data centers. 

Wi-Fi 7 Signal Generation, Measurement, and Analysis Bootcamp

Join Keysight engineers for a skill-building deep dive into Wi-Fi 7. This bootcamp guides you through IEEE 802.11be and the changes it brings to the standard, with demonstrations and step-by-step guidance you can start applying in your design today. By the end of this bootcamp, you will be able to take advantage of the right software to make signal analysis easier and automate your testing process.  Learn:  What IEEE 802.11be is and how it affects you  How PathWave software can help you analyze, measure, and generate Wi-Fi 7 signals  How to use Keysight PathWave 89600 VSA, Signal Generation, and Instrument RPA software along with PathWave X-Series Measurement Application  This bootcamp is ideal for wireless network engineers and anyone looking to gain a deeper understanding of Wi-Fi 7 signal analysis.

Spectrum for 6G Research into Sub-Terahertz

Join Keysight engineers for a deep dive into the sub-terahertz bands 90 to 300 GHz. With each cellular generation, researchers review new spectrum allocations and work on improving the use of existing spectrum. The sub-THz band allocated for 5G is a focus for 6G research because it can support extremely high data rates. This course guides you through methods to explore sub-THz bands from 90 to 300 GHz with research demonstrations and step-by-step guidance you can start applying in your lab today. By the end of this course, you will be able to understand why new options like Sub-Terahertz frequencies are under evaluation for spectrum for 6G. Learn:   Get to 100 gigabits per second (Gbps) to 1 terabit per second (Tbps) data throughput to support 6G research Understand channel propagation characteristics to evaluate system performance in sub-terahertz frequency bands Perform 6G channel sounding research with wide bandwidths at D-band This course is ideal for: RF research engineers or anyone looking to gain a deeper understanding of spectrum options for 6G.

DDR5 Memory Design - The Basics

The insatiable desire for more bandwidth in data centers has led to intense pressure to push DDR5 memory technology out to market faster. Learn: What the changes from DDR4 to DDR5 are, and the new EDA simulation and measurement techniques  How channel simulation technology (using IBIS-AMI modelling) has been adapted specifically for single-ended signals with an external clock  Keysight Advanced Design System (ADS) with SerDes and memory simulation bundle W3622B This Electronic Design Automation (EDA) bootcamp is ideal for signal integrity and hardware engineers designing, simulating, or validating DDR5 systems.

Debugging Automotive CAN Buses with an Oscilloscope

In this course, Keysight engineers equip you with the skills you need to debug and analyze automotive electronic signals using oscilloscopes through an in-depth exploration. They guide you through capturing, decoding, and analyzing signal behavior across automotive protocols and power domains using demonstrations and step-by-step instructions that you can implement in your lab right away. By the end of this course, you will be able to confidently identify and troubleshoot signal issues in modern vehicle systems using advanced oscilloscope tools. Learn: How to decode and validate serial protocols like CAN, LIN, FlexRay, and SENT Techniques for capturing and analyzing transient and timing-critical events Methods for isolating and debugging power integrity and signal quality issues This course is ideal for automotive hardware and test engineers or anyone looking to gain a deeper understanding of oscilloscope-based debugging for electronic vehicle systems.

Receiver and Bit Error Rate Testing (BERT) Basics

Join Keysight engineers for a skill-building deep dive into receiver and bit error rate testing. This course guides you through the fundamentals of BERT with demonstrations and step-by-step guidance you can start applying in your lab today. By the end of this course, you will be able to confidently perform receiver testing, interpret eye diagrams, and analyze bit error rates to validate high-speed digital designs. Learn: How bit error rate testers (BERTs) work and why they are essential for receiver validation How to set up and perform compliance testing using eye diagrams and stress signals How to identify and troubleshoot signal integrity issues affecting receiver performance This course is ideal for digital design, test engineers, or anyone looking to gain a deeper understanding of receiver testing, BERT methodology, and high-speed digital signal validation.

Designing for Power Integrity - Advanced Topics

This is the Advanced Topics for Power Integrity Design. Power Integrity experts explore Power Delivery Networks topics and approaches to avoid design pitfalls using Keysight ADS with the Power Integrity bundle. Learn: The importance of flat target impedance design and the benefits of state-based averaged models for dc-dc converter voltage regulator modules How to measure and model low impedance inductors and capacitors 2000 Amp PCB Power Delivery Design, Simulation, and Measurement Challenges How to design for power supply non-invasive stability margin (NISM) This Electronic Design Automation (EDA) boot camp is ideal for high-speed digital design engineers and anyone seeking a deeper understanding of designing for power integrity in power delivery networks.

Signal Analyzer Basics

Join Keysight engineers for a skill-building deep dive into spectrum and signal analysis fundamentals. This bootcamp guides you through essential measurement techniques with demonstrations and step-by-step guidance you can start applying in your lab today. By the end of this course, you will be able to confidently perform complex signal analysis measurements and optimize analyzer performance for challenging applications.  Learn:  Master spectrum analyzer fundamentals and select the right measurement solution for your application  Understand time vs. frequency domain concepts and apply them to real-world signal characterization  Identify and measure spurious emissions while ensuring electromagnetic compatibility compliance  Optimize dynamic range to reveal low-level signals in noisy environments  Perform accurate noise figure measurements and advanced noise analysis techniques  This bootcamp is ideal for: RF engineers, test engineers, or anyone looking to gain a deeper understanding of spectrum analysis and signal measurement optimization. 

Quantum Horizons Part 1 – Core Concepts and System Design

Step into a realm where bits become qubits and impossible problems find elegant solutions. Part 1 of this bootcamp guides you through quantum fundamentals and the design of superconducting systems, with demonstrations and step-by-step guidance you can start applying in your lab today. By the end of this bootcamp, you will be able to confidently explain how qubits work, compare quantum platforms, and begin designing quantum systems. Learn: Foundational quantum concepts, including qubits, superposition, and entanglement How to build and model superconducting quantum systems How to evaluate different quantum platforms and their core operating principles This bootcamp is ideal for engineers and enthusiasts looking to build a solid foundation in quantum computing theory and design.

Signal Integrity Design - The Basics

Dive deeper into mastering signal integrity in high speed digital designs. This EDA bootcamp begins with foundational concepts and analysis techniques, then progresses through simulation, design strategies, and advanced troubleshooting methods using real-world tools and examples.  Each lesson bundle includes practical demonstrations, expert insights, and step-by-step guidance to help you confidently tackle signal integrity challenges and optimize your designs.  Learn:  How to identify and resolve common signal integrity issues early in the design cycle  The role of simulation and analysis in achieving robust, high-speed performance  How to apply advanced techniques and documentation best practices for long-term success  This bootcamp is ideal for hardware engineers, PCB designers, signal integrity specialists, and anyone involved in high-speed digital design looking to enhance their skills and workflow. 

Design for Power Integrity - The Basics

Dive deeper into Power Delivery designs. This boot camp features Steve Sandler, a Keysight ADS-certified expert. Steve provides a solid foundation for Power Delivery Networks designs and approaches to avoid design pitfalls using Keysight ADS with the Power Integrity bundle. Learn: The importance of flat target impedance design and the benefits of state-based averaged models for dc-dc converter voltage regulator modules How to measure and model low impedance inductors and capacitors How to design for power supply non-invasive stability margin (NISM) This Electronic Design Automation (EDA) bootcamp is ideal for high-speed digital design engineers and anyone seeking a deeper understanding of designing for power integrity in power delivery networks.

Signal Integrity Testing and Network Analysis

Join Keysight engineers for a skill-building deep dive into high-speed signal integrity and network analysis. This bootcamp guides you through the essential theory, tools, and hands-on measurements you need to confidently evaluate high-speed digital interconnects. With demonstrations and step-by-step guidance you can start applying in your lab today, you’ll walk away with practical skills for characterizing and improving signal quality. By the end of this course, you will be able to use TDR and VNA tools, interpret S-parameters and eye diagrams, and troubleshoot real-world signal integrity issues across PCBs and backplanes. Learn: How transmission lines and impedance mismatches impact high-speed signals How to configure and perform signal integrity measurements using VNAs and TDRs How to visualize and debug performance using eye diagrams and S-parameters This bootcamp is ideal for signal integrity engineers, hardware designers, or anyone looking to build hands-on measurement skills and understand how signal quality affects modern high-speed systems.

O-RAN Demo

Join Keysight engineers for a skill-building deep dive into O-RAN validation and testing. This course guides you through O-RAN system architecture, protocol emulation, real-time RIC testing, and performance validation; complete with demonstrations and step-by-step guidance you can start applying in your lab today. By the end of this course, you will be able to confidently validate multi-vendor O-RAN components, streamline your test topology, and improve system performance from fronthaul to user experience. Learn: How to emulate, validate, and troubleshoot cross-domain O-RAN systems Strategies for testing real-time RIC, O-DU/O-CU, and UE integration Best practices for benchmarking latency, throughput, and conformance This course is ideal for wireless system engineers, O-RAN developers, or anyone looking to gain a deeper understanding of O-RAN testing and validation workflows.

RF System Design with Digital Twins

Dive deeper into best practices for designing RF Systems. A key to achieving faster, lower-cost development is a Model-based Systems Engineering (MBSE) approach, integrating data through models and predicting performance through ‘digital twin’ architectures. Learn: How Keysight’s System Design software connects to and enables your MBSE flow How critical it is to link simulation and measurements to achieve these goals How to unify design and validation in a Digital Twin workflow This bootcamp is ideal for RF System design engineers and anyone seeking a deeper understanding of SATCOM and 5G/6G system design simulations.