Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

UXR0702A Infiniium UXR-Series Oscilloscope: 70 GHz, 2 Channels

Sold By:

Configure

Key Features and Functions
  • 70 GHz bandwidth
  • 2 full bandwidth channels
  • 10 bit ADC
  • 256 GSa/s sample rate on all channels
  • Up to 2 Gpts of memory
  • Upgradable to 110 GHz
  • Optional calibration module for on-site self-calibration
  • High-speed SDA and Clock Recovery included
  • User Defined functions included
  • KeysightCare Logo - PPX
  • Calibration Plans
    Every spec verified, adjustments included
What's Included
  • USB keyboard and mouse
  • 1.85 mm female to 1.85 mm female connector saver adapters (1 per channel)
  • Torque wrench - 8 in-lb, 5/16 Inch
  • Adapter-coaxial straight 2.92 mm jack to 2.40 mm jack 50 ohm, 40 GHz
  • 3.5 mm female to 3.5 mm female connector saver adapter
  • ESD mat with wrist strap and cord
  • Heel ground strap

Software for this Product

 UXR-Series Protocol Applications
UXR-Series Protocol Applications
Simplify the debugging of your design
  • Decode the protocol packets of more than 20 high-speed serial buses
  • Packets are displayed on scope waveform and listing windows, which are time-correlated
  • Debug and find the root cause of issues whether it is physical or protocol layer related
 UXR-Series Compliance Applications
UXR-Series Compliance Applications
Get deep technical expertise
  • Test to the exact specifications of each technology standard
  • Compliance software packages are certified by Keysight experts
  • Have assurance that your products will pass standards


 

 UXR-Series Analysis Applications
UXR-Series Analysis Applications
UXR-Series Analysis Applications
  • Full offline capability allows you to test from simulation through silicon debug
  • VSA software enables analysis of your toughest RF problems
  • Connect up to 10 oscilloscopes to achieve 40 channels of acquisition in a single timebase

Frequently Bought Together

 Infiniium UXR Oscilloscope Calibration Modules
Infiniium UXR Oscilloscope Calibration Modules
Infiniium UXR Real-Time Oscilloscope Calibration Modules
  • Enables full factory quality calibration
  • Generates known signals that are calibrated to National Institute of Standards and Technology
  • Three different models to interface with either the 1.0, 1.85, or 3.5 mm UXR front-end technology
N2852A AutoProbe II to AutoProbe III interface adapter
N2852A AutoProbe II to AutoProbe III interface adapter
  • AutoProbe II to AutoProbe III interface adapter
  • Enables use of AutoProbe II probing portfolio on UXR-Series oscilloscopes
  • Allows cascaded use with InfiniiMax AutoProbe II adapters (N5442A or N5449A)

* Prices for: United States. Prices are subject to change without notice. Prices shown are Manufacturer's Suggested Retail Prices (MSRP). Prices shown are exclusive of taxes.