Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Starting From US$ 2,631

Typical Configuration  

Typical Configuration

N2797A Active Probe - 1.5 GHz extreme temperature

  • R-51B-001-Z Return to Keysight Warranty - 3 years

Configure

Prices for: United States

* Prices are subject to change without notice. Prices shown are Manufacturer's Suggested Retail Prices (MSRP). Prices shown are exclusive of taxes.

R-50C-011-3 Calibration Assurance Plan - Return to Keysight - 3 years US$ 475
R-50C-011-5 Calibration Assurance Plan - Return to Keysight - 5 years US$ 895
R-50C-021-3 ANSI Z540-1-1994 Calibration - 3 years call
R-50C-021-5 ANSI Z540-1-1994 Calibration - 5 years call
R-51B-001-5Z Warranty Assurance Plan - Return to Keysight - 5 years US$ 110

Prices are subject to change without notice.

Related Products & Solutions

  • N2744A T2A probe interface adapter- top down view N4839A dual lead socketed adaptor, 6 cm 

    N4839A dual lead socketed adaptor, 6 cm

    • Allows connection to a 25 mil square pin or fine pitch accessories
    • 6 cm length
    • 1.5 GHz with N2796A
    • Adaptor includes an integrated damping resistor to achieve flat frequency response

  • N2744A T2A probe interface adapter- top down view N4841A dual lead socketed adaptor, 9 cm 

    N4841A dual lead socketed adaptor, 9 cm

    • Allows connection to a 25 mil square pin or fine pitch accessories
    • 9 cm length
    • 1 GHz with N2795/96A/97A
    • Adaptor includes an integrated damping resistor to achieve flat frequency response
       

  • N2744A T2A probe interface adapter- top down view N4842A dual pin PCB header 

    N4842A dual pin PCB header

    • Dual pin PCB header
    • Allows connection to 100 mil (2.5 mm) spacing thru-holes on PCB
    • Full bandwidth with N2795/96A/97A
       

  • N2744A T2A probe interface adapter- top down view N4843A solderable tips 

    N4843A solderable tips

    • Solderable tip kit
    • 25 mil square pins that can be soldered into the target board for temporary test point
    • Full bandwidth with N2795/96A/97A
       

  • N2744A T2A probe interface adapter- top down view N4844A right angle ground lead, 5 cm 

    N4844A right angle ground lead, 5 cm

    • Right angle ground lead for general, low-frequency probing
    • 5 cm long
    • Can be fitted onto 25 mil square pins
       

  • N2744A T2A probe interface adapter- top down view N4845A ground blade 

    N4845A ground blade

    • Low inductance ground blade
    • Reduces ground lead inductance
    • For use with N2795A/96A/97A active probe
       

  • N2744A T2A probe interface adapter- top down view N4846A offset blade 

    N4846A offset blade

    • Low inductance offset ground
    • Reduces ground lead inductance
    • For use with N2795A/96A/97A active probe
       

  • N2795A active probe and accessories N2795A Active Probe, 1 GHz 

    N2795A Active Probe, 1 GHz

    The N2795A 1 GHz active probe is a low-cost single-ended active probe with the AutoProbe interface.

  • N2796A active probe and accessories N2796A Active Probe, 2 GHz 

    N2796A Active Probe, 2 GHz

    The N2796A 2 GHz active probe is a low-cost single-ended active probe with the AutoProbe interface.

  • N2744A T2A probe interface adapter- top down view N4840A dual lead solder-in adaptor, 5 cm 

    N4840A dual lead solder-in adaptor, 5 cm

    • Allows connection to a 25 mil square pin or fine pitch accessories
    • 9 cm length
    • 1 GHz with N2796A
    • Adaptor includes an integrated damping resistor to achieve flat frequency response