Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Typically Configured Price US$ 4,369

Typical Configuration

E4980AL Precision LCR Meter

  • R-51B-001-Z Return to Keysight Warranty - 3 years
  • E4980AL-032 20Hz to 300 kHz with DCR
  • E4980AL-710 No Interface
  • E4980AL-710 No Interface

Typically Configured Price US$ 4,369

Configure

Prices for: United States

* Prices are subject to change without notice. Prices shown are Manufacturer's Suggested Retail Prices (MSRP). Prices shown are exclusive of taxes.

E4980AL-032 20Hz to 300 kHz with DCR US$ 4,369
E4980AL-052 20Hz to 500 kHz with DCR US$ 6,553
E4980AL-102 20Hz to 1 MHz with DCR US$ 8,737
E4980AL-1A7 Calibration + Uncertainties + Guardbanding (Not Accredited) US$ 361
E4980AL-1CM Rack mount kit US$ 121
E4980AL-201 Handler interface US$ 603
E4980AL-301 Scanner interface US$ 603
E4980AL-A6J ANSI Z540-1-1994 Calibration US$ 361
E4980AL-ABA U.S. - English localization US$ 0
E4980AL-ABJ Japan - Japanese localization US$ 319
E4980AL-PLG Continental European power cord - ONLY FOR EU DISTR W MULT PWR CORD STANDARDS US$ 0
16034E
Test Fixture (SMD Components) 

Test Fixture (SMD Components)

16034E

Price: US$ 1,790

The 16034E test fixture is designed for impedance evaluations of SMD components.
US$ 1,790
16034G
SMD Test Fixture 

SMD Test Fixture

16034G

Price: US$ 2,204

The 16034G is a test fixture for impedance measurements.
US$ 2,204
16034H
SMD Array Type LCR Test Fixture 

SMD Array Type LCR Test Fixture

16034H

Price: US$ 2,204

The 16034H is designed for impedance evaluations of array-type SMD.
US$ 2,204
16047A
Test Fixture (Axial and Radial) 

Test Fixture (Axial and Radial)

16047A

Price: US$ 572

The 16047A is designed for impedance evaluation of axial/radial lead type devices.
US$ 572
16047E
Test Fixture 

Test Fixture

16047E

Price: US$ 1,565

The 16047E is designed for impedance evaluation of lead type devices
US$ 1,565
16048A
Test Lead, BNC Connector to BNC Connector Board 

Test Lead, BNC Connector to BNC Connector Board

16048A

Price: US$ 677

The 16048A test leads extend the measurement port with a 4 terminal-pair configuration.
US$ 677
16065A
200 Vdc External Voltage Bias Fixture 

200 Vdc External Voltage Bias Fixture

16065A

Price: US$ 2,023

The 16065A test fixture makes it possible to measure a DUT with up to +/-200V DC BIAS.
US$ 2,023
16065C
40Vdc External Voltage Bias Adapter 

40Vdc External Voltage Bias Adapter

16065C

Price: US$ 1,021

The 16065C adapter is designed to operate specifically with the 4263A/B, 4268A and 4278A.
US$ 1,021
16089A
Large Kelvin Clip Lead 

Large Kelvin Clip Lead

16089A

Price: US$ 969

The 16089A makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures.
US$ 969
16089B
Medium Kelvin Clip Lead 

Medium Kelvin Clip Lead

16089B

Price: US$ 955

The 16089B makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures.
US$ 955
16089C
Kelvin IC Clip Lead 

Kelvin IC Clip Lead

16089C

Price: US$ 1,155

The 16089C makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures.
US$ 1,155
16334A
Test Fixture (Tweezers Contacts) 

Test Fixture (Tweezers Contacts)

16334A

Price: US$ 1,051

The 16334A is designed for impedance evaluations of SMD.
US$ 1,051
16380A
Standard Air Capacitor Set (1pF to 1000pF) 

Standard Air Capacitor Set (1pF to 1000pF)

16380A

Price: US$ 8,093

The 16380A is a standard capacitor set consisting of four precision capacitors
US$ 8,093
16380C
Capacitance Standard Set - 0.01uF to 10uF 

Capacitance Standard Set - 0.01uF to 10uF

16380C

Price: US$ 13,855

The 16380C is a standard capacitor set consisting of three precision capacitors - 0.01uF (16385A), 0.1uF (16386A), 1uF (16387A),and an optional 10uF (16338A).
US$ 13,855
16451B
Dielectric Test Fixture 

Dielectric Test Fixture

16451B

Price: US$ 7,005

The 16451B is used to evaluate the dielectric constant of solid dielectric materials accurately, and complies with ASTM D150.
US$ 7,005
16452A
Liquid Test Fixture 

Liquid Test Fixture

16452A

Price: US$ 14,836

The 16452A provides accurate dielectric constant and impedance measurements of liquid materials.
US$ 14,836
42030A
Four Terminal Pair Standard Resistor Set 

Four Terminal Pair Standard Resistor Set

42030A

Price: US$ 9,900

The 42030A is a standard resistor set consisting of nine precision resistor standards which range from 1 mΩ to 100 kΩ.
US$ 9,900
42090A
Open Termination (4-Terminal Pair) 

Open Termination (4-Terminal Pair)

42090A

Price: US$ 1,084

The 42090A is an open termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers.
US$ 1,084
42091A
Short Termination (4-Terminal Pair) 

Short Termination (4-Terminal Pair)

42091A

Price: US$ 1,084

The 42091A is a short termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers.
US$ 1,084
82357B
USB/GPIB Interface High-Speed USB 2.0 

USB/GPIB Interface High-Speed USB 2.0

82357B

Price: US$ 594

The 82357B USB/GPIB converter provides a direct connection from a USB port on your Laptop or desktop PC to GPIB instruments.
US$ 594

Prices are subject to change without notice.

R-50C-011-3 Calibration Plan - Return to Keysight - 3 years US$ 683
R-50C-011-5 Calibration Plan - Return to Keysight - 5 years US$ 1,286
R-50C-011-MU-3 Keysight Calibration + Uncertainties - 3 years US$ 1,128
R-50C-011-MU-5 Keysight Calibration + Uncertainties - 5 years US$ 2,130
R-50C-016-3 Keysight Calibration + Uncertainties + Guardbanding - 3 years call
R-50C-016-5 Keysight Calibration + Uncertainties + Guardbanding - 5 years call
R-50C-021-3 ANSI Z540-1-1994 Calibration - 3 years call
R-50C-021-5 ANSI Z540-1-1994 Calibration - 5 years call
R-51B-001-5Z Extended Warranty - Return to Keysight - 5 years US$ 751

Prices are subject to change without notice.

Related Products & Solutions

  • no image available N1500A Materials Measurement Suite 

    N1500A Materials Measurement Suite

    • Software automates complex permittivity and permeability measurements
    • Flexible option configuration
    • One simple installation program and integrated method option loader switches seamlessly between the different measurement methods

  • E4980A Precision LCR Meter E4980A Precision LCR Meter, 20 Hz to 2 MHz 

    E4980A Precision LCR Meter, 20 Hz to 2 MHz

    • Frequency: 20 Hz to 2 MHz
    • +/- 0.05 % basic accuracy
    • Built-in 40V DC Bias, 20 Vrms test signal (Option 001)
    • 40 A DC support (Option 002) with the 42841A Bias Current Source
    • Rdc measurements (Option 200)

  • no image available N1501A Dielectric Probe Kit 

    N1501A Dielectric Probe Kit

    • Designed to work with N1500A materials measurement suite to measure complex permittivity
    • Best for measuring liquids and conformable solids
    • Flexible option configuration allows you to choose only the hardware you need