Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

N5412C Serial Attached SCSI − 3 (SAS-3) Compliance Test Software for Infiniium 90000 Series Oscilloscopes

Product Status: Obsolete
This product is no longer available

A replacement for this product is available:

Key Features & Specifications

Automation:

  • Test setup wizard guides you through test selection, configuration, connection, execution, and results reporting
  • Measurement connection setups are displayed
  • Oscilloscope setup is automatically configured for each test
  • Test results report documents test configuration, measurements made, pass/fail status, margin analysis, and waveforms

Standards supported:

  • SAS-3 Specification for 1.5, 3.0, 6.0 and 12.0 Gbps data rate
  • UNH-IOL SAS Consortium SAS-3 12 Gbps physical layer test suite

Features

  • Supports transmitter spread spectrum clocking (SSC), signal long-term stability, amplitude, rise/fall times, common-mode voltages, jitter, WDP and other tests
  • Supports transmitter equalization and end-to-end simulation analysis that require SAS3_EYEOPENING script
  • Supports transmitter loopback and out-of-band (OOB) testing with 81134A and N4903B pattern generators

Requirements:

  • Infiniium 4.20 or higher software revision for 90000 Series oscilloscopes
    N5412C-1FP upgrade existing to SAS-3 compliance – requires the N5412A or N5412B
    N5412C-2FP SAS-2 Compliance Test software (Option 043 on new 90000 Series oscilloscopes or Option N5435A-039 for server based license)
    N5412C-3FP SAS-3 Compliance Test software (Option 076 on new 90000 Series oscilloscopes or Option N5435A-073 for server based license)
  • E2688A High-Speed SDA software (Option 003 on new 90000 Series oscilloscopes or Option N5435A-003 for server based license)
    N5400A EZJIT Plus Jitter Analysis software (Option 004 on new 90000 Series oscilloscopes or Option N5435A-001 for server based license)
    N8806A Matlab basic software package for running WDP tests – optional (Option 061 on new 90000 Series oscilloscopes)
    N2809A PrecisionProbe Cable and Probe Correction Software – optional (Option 001 on new 90000 Series oscilloscopes or Option N5435A-044 for server based license)
    N5465A InfiniiSim Waveform Transformation Toolset – optional (Option 014 on new 90000 Series oscilloscopes or Option N5435A-027 for server based license)
  • N5421A SFF-8482 test fixture
    Wilder Technologies SFF-8482 and Mini-SAS HD test fixtures (www.wilder-tech.com )

Extensibility

  • Use the N5467A User-Defined Application tool (www.keysight.com/find/uda) to:
  • Create and fully integrate custom tests, configuration variables and connection instructions
  • Insert external application calls into the run sequence, such as MATLAB scripts or your device controller
  • Configure additional external instruments used in your test suite
     

Description

Keysight Technologies' N5412C Serial Attached SCSI − 3 (SAS-3) compliance test software for Infiniium oscilloscopes provides you with a fast and easy way to validate and debug your SAS 1.5, 3.0, 6.0 and 12.0 Gbps silicon, host bus adapter, initiator, high-density disk drive or enclosure backplane. The SAS electrical test software allows you to automatically execute electrical checklist tests at SAS interface points and displays the results in a flexible report format. In addition to the measurement data, the report provides a margin analysis that shows how closely your device passed or failed each test. The software also supports tests that require the SAS3_EYEOPENING and WDP tests.

To make measurements with the N5412C SAS-3 compliance test software, you also will need a method of connecting to the SAS compliance interface on the electrical mating surfaces of your SAS connector. Keysight currently provides a full set of compliance test fixtures for the SFF-8482, SAS x2 internal drive/backplane connector interfaces. The N5421A SAS SFF-8482 compliance test fixture kit offers connectivity from the SFF-8482 primary and secondary transmitter and receiver differential ports to SMA for connection to Keysight Infiniium 90000 and 90000 X-Series high-performance oscilloscopes. The N5421A kit also includes the TX and RX transient circuit test loads. Each of these test circuits is defined in Section 5.9.2, zero-length test load, in the serial attached SCSI - 3 (SAS-3) specification.

Related Industries & Technologies