N9927A FieldFox Handheld Software

• Fully error-corrected time domain reflection or transmission response
• Gating available to remove unwanted response
• View time and frequency domain data simultaneously

• Adds remote control capability to FieldFox for iDevices
• User must supply iPad, iPhone, or iPod
• User must download free FieldFox app from App Store

• Adds QuickCal calibration to FieldFox
• No cal kit required
• Optional load for better accuracy
• Designed for Type-N and 7/16 connectors

• Swept-frequency power measurement
• Frequency-offset capability
• Measurements require a USB power sensor
• Option 302 is a pre-requisite
   

• Adds reverse measurements to the base model
• All four S-parameters (S21, S11, S12, S22), magnitude and phase
• 30 kHz to 18 GHz

• Mixed-mode or balanced reflection measurements
• Scc11, Sdd11, Sdc11, Scd11
• Option 211 is a pre-requisite for Option 212
   

Option 215 adds time domain reflectometry (TDR) measurements to CAT mode. The measurements include TDR (linear rho) and TDR impedance (ohm).

• Adds Keysight USB power sensor support FieldFox analyzers
• Frequency and power range depend on sensor

• 30 kHz to 18 GHz
• 54 cable types stored (loss and velocity factor)
• Custom cable editing capability
• DTF to 5 km

Adds internal GPS receiver to FieldFox

Geo-location data: latitude, longitude, altitude, time, sync time/date

Increase frequency reference accuracy

Order antenna separately

• Vector voltmeter mode
• 1-port cable trimming
• 2-port transmission
• B/A and A/B
   

• Internal built-in power supply
• Voltage: +1 to +32 V
• Maximum current: 0.65 A
• Maximum power: 7 watts

• Built-in channel power meter
• No sensor required
• 100 kHz to 18 GHz

• Pulse measurements using FieldFox and USB peak power sensors
• Measure average power, peak power, and peak to average ratio
• Pulse profiling and pulse statistics such as rise time, fall time and PRF