Wir denken, das dies die Seite ist, die Sie sehen wollten.. Stattdessen Suchergebnisse ansehen:

Können wir Ihnen behilflich sein?

MXG Signal Generator UXA Signal Analyzer PXA Signal Analyzer Eine Lösung finden Technische Unterstützung An einem Training teilnehmen Unsere Teilnahme an Veranstaltungen finden Hochwertige Gebrauchtgeräte KeysightCare Online Kauf

No product matches found - System Exception

J6824A Eight-Port E1/T1 Line Interface Module (LIM)

Produkt Status

Obsolete

Technische Unterstützung

Kalibrierung und Reparatur

Service anfragen

Ersatzprodukt

No replacement found for this product.

Kontakt

Überblick und Leistungsmerkmale
Upgrades nach dem Kauf
Ressourcen

HIGHLIGHTS

This LIM helps network professionals isolate and resolve network problems quickly on ATM Inverse Multiplexing for ATM (IMA) and 3G networks.

Can be used with the J6800A Network Analyzer, J6801A Distributed Network Analyzer, and J6802B Distributed Network Analyzer MX platforms.
Hot-swappable - a LIM can be removed safely while an application is running and another LIM inserted in its place; the current application terminates and the user can launch another suitable application for the new LIM without having to power down and restart the analyzer.

The Eight-port E1/T1 LIM for the Keysight Network Analyzer offers real-time ATM IMA analysis and troubleshooting on up to eight ports.

Keysight's new eight-port E1/T1 LIM is the first to offer multiport IMA analysis on a hot-swappable interface and on a portable field service tool. This enables network operators to purchase one Network Analyzer for use in troubleshooting any LAN and WAN technology, from E1/T1 to Gigabit Ethernet, including multi-port IMA.

Operational Modes:

For the Network Analyzer application:
- single-port ATM
- multi-port ATM IMA
- multi-port ISDN PRI layer 2 decodes
For the Signaling Analyzer application:
- single-port ATM
- multi-port ATM IMA
- multi-port Channelized with HDLC (SS7, Frame Relay and ISDN) or TRAU 16K framing

Industry First: Eight-port ATM IMA on a portable platform with hot-swappable interfaces
Lowest cost per port for ATM IMA analysis
2G/2.5G/3G channelized eight-port analysis for the Keysight Signaling Analyzer
Eight-port E1/T1 passive monitoring taps available for convenient and efficient connections to a network
The J6824A LIM can be configured to operate with T1 (1.5 Mb/s) or E1 (2 Mb/s) line rate with DS1 or E1 framing, respectively, at RJ-48C 8-pin connectors, suitable for balanced 100 Ohm T1 or 120 Ohm E1 interfacing, or unbalanced 75 Ohm E1 interfacing
Cable options provide 8 dual Bantam connector cables terminated in an RJ48C plug; or 8 dual 75 Ohm BNC connector cables terminated in an RJ48C plug; or 8 balanced cables which swap cable pairs between RJ48C pins [1,2]/[4,5] to RJ45 pins [5,4]/[6,3]
Real-time simultaneous AAL-2 or AAL-5 reassembly on more than 4000 ATM virtual channels (user controls which)
ATM Policing, Traffic Contract Estimation and 1-point CDV on multiple virtual circuits simultaneously

Sortieren nach :

Datum

Datum Titel

Filter Results

No information found for this product

Zurücksetzen

Nach Inhaltsart