Hi, I'm Michelle, an engineer here at Keysight, and I helped build this course.
For the next 55 minutes, Johnnie, our Keysight InfiniiVision oscilloscope expert,
is going to walk you through debugging automotive and electronic signals using oscilloscopes.
We'll demonstrate how to use the advanced measurement features and capabilities
of Keysight's InfiniiVision oscilloscopes to test and debug automotive serial buses,
including CAN, CAN FD, and more.
Most of our time will be spent on CAN, but we're going to dive into decoding with CAN bus,
with hardware-based decoding and symbolic decoding.
Then we'll take a look at CAN Bit timing and arbitration,
followed up by CAN-eye diagram testing.
We'll also go into a brief overview of CAN FD, which stands for flexible data.
Finally, we'll wrap up the course with a demonstration
of different automotive serial buses, including CAN FD, LIN, SENT, and more.
Throughout the course, there will be a lot of demonstration videos
performed on the Keysight InfiniiVision 4000 X-Series oscilloscope.
If you have that scope or even the 3000 or 6000 X-Series oscilloscope,
be sure to grab your scope so that you can follow along with the demo videos
to get hands-on experience using these features.
Grab your scope and click to the next lesson to get started.