通过从该网址下载至PC升级PSA固件。

注意: >A.03.00 的固件版本必须高于原固件版本。对于 “PSA_Version_List”。

固件安装要求

  • Microsoft Windows PC,带 LAN 卡
  • Windows NT 4.0, Windows 98, Windows 2000, Windows XP
  • 如果PC或分析仪未联网,需要有跨接电缆。可使用有转接针的 CAT, RJ45 电缆, Keysight p/n 8121-0545
  • CD-ROM 驱动器

固件下载和安装说明
 "PSA Firmware Procedure" 指导您完成下述过程:

  1. 把该固件升级包下载至您的 PC
  2. 在 PC 中安装新的固件升级包
  3. 把该固件下载至PSA

为什么要安装这一升级?

  • 性能增强和排除缺陷。详情见 "PSA 固件历史"

发布日期 版本 版本说明
2012-07-22 A.11.21 Fixed spike that occurs in SA mode when measuring noise-like signals with signal levels about -50 dBm where Avg/VBW type is set to Log-Power (Video) and the Video bandwidth is wide open (typically >= 4 times RBW). Fixed various Measuring Receiver de
发布日期 版本
2012-07-22 A.11.21
版本说明
Fixed spike that occurs in SA mode when measuring noise-like signals with signal levels about -50 dBm where Avg/VBW type is set to Log-Power (Video) and the Video bandwidth is wide open (typically >= 4 times RBW). Fixed various Measuring Receiver de

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA
     

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Agilent p/n 8121-0545
  • CD-ROM drive

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  1. Select the firmware version
  2. Select "PSA Firmware Procedure" to guide you through the process
  3. Download the firmware update package into your PC
  4. Install new firmware update package on your PC
  5. Download the firmware from the PC into the PSA

如何安装

  • See Documentation

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • Microsoft® Windows based Personal Computer with ethernet wired LAN card.
  • Windows 2000, or Windows XP (Will not work with Windows Vista or Windows 7)
  • Crossover cable if PC or analyzer is not connected to network. Use a CAT, RJ45 cable with cross pinning, Keysight p/n 8121-0545
  • CD-ROM drive
     

支持的仪器

  • E4440A, E4443A, E4445A, E4446A, E4447A, E4448A, N5531S, N9039A

如何下载

  • 无此信息

如何安装

  • 无此信息

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • 无此信息

如何下载

  • 无此信息

如何安装

  • 无此信息

颁发许可证

  • 不要求具有许可证

安装到: PC / Instrument

前提要求

  • 无此信息
SHOW MORE