B2900A 1.0.1144.9870 RELEASE NOTE

- FIXED DEFECTS

#4650  When mDNS is disabled with no LAN connection, AgilentLxiWebService.exe dies.
#63772 Incorrect source values are fetched when ARM count is INFinite.
#64217 Incorrect error message for "IADC Lost" event.
#70493 Unexpected thin-out result on Graph/Roll view.
#74773 Cannot show CH2 data captured during remote state with remote display off
#74786 Unexpected voltage/current output when stepping voltage/current list by EXTn signals.
#76607 Does not output trigger when specified only auto start sense action.
#76815 Unexpected staircase sweep parameter changes when editing list sweep parameters.
#85261 Crash on Reading/Buffer Overflow status bit changes



B2900A 1.0.1121.1140 RELEASE NOTE

- FIXED DEFECTS

#49884 Unexpected DISP:ZOOM result during remote display is OFF
#63182 Unexpected current value format on pulsed mode




B2900A 1.0.1120.6435 RELEASE NOTE

- FIXED DEFECTS

#49884 Unexpected DISP:ZOOM result during remote display is OFF




B2900A 1.0.1120.644 RELEASE NOTE

- FIXED DEFECTS

#53687 Unexpected power value format in Measure Result dialog
#54235 Changed math result format in Measure Result dialog
#63051 Unexpected number of auto-ohm measurements by Trigger button
#63054 Incorrect V/I parameter rounding on SCPI commands
#63066 Incorrect format selection on Trace Statistics Format dialog
#63182 Unexpected current value format on pulsed mode
#63306 Unexpected number of digits when feeding math result to Limit Test




B2900A 1.0.1119.2582 RELEASE NOTE

- FIXED DEFECTS

#49884 Unexpected DISP:ZOOM result during remote display is OFF
#53552 Unexpected interlock open error when output switch is turned on 
#53702 Updating firmware causes system crash when trigger system is busy
#54024 Unexpected delta timestamps in trace result
#54219 Showing "Trace Statistical Result" dialog causes system hang-up on single channel models
#54221 Trace points cannot be set on "Trace Buffer Setup" dialog
#55328 Unexpected binary/octal/hexadecimal query result (Web)
#56344 Unexpected trace data is stored to USB flash memory




B2900A 01.00.1118.8052 RELEASE NOTE

- FIXED DEFECTS

#48790 Refined binary/decimal/hexadecimal edit on several dialogues
#50370 SENSe:DATA? causes system crash during measurement on 2400 mode
#53168 Operation status condition register value maybe incorrect on SOCKET
#53404 SMU selftest failes on Loop Control test
#53496 Unexpected current range overflow when voltage measurement overflew 
#53552 Unexpected interlock open error when output switch is turned on 
#53601 Failed to initiate pulse operation when its width is 50us and period is 100us
#53605 Unexpected carry control when editing values by rotary knob 
#53671 SMU output change should not be allowed during trigger system is busy
#53672 Cannot change remote sensing with output on
#53676 Inconsiderate error messages on LXI subsystem commands
#53682 Unexpected enable/disable controls on Single view
#53686 Unexpected "Locked" message controls for GPIB/USB connections
#53687 Unexpected power value format in Measure Result dialog
#53690 No error on "Load List Sweep Data" dialog 
#53692 Deleting all list item on "List Sweep" dialog causes system crash
#53700 Cannot move up to the parent from "Empty" folder
#53702 Updating firmware causes system crash when trigger system is busy
#53735 No error on :INIT:<TRAN|ACQ> when limit test is enabled 
#53740 Cannot change source mode when its ranging mode is fixed
#53760 Unexpected operation when sweeping with auto-ohm measurement
#53761 Setting more than 32 characters as math unit name causes system crash
#53764 Math result may not be shown on "Measure Result" dialog
#53993 Incorrect format selection result on "Format(Measure)" dialog
#54024 Unexpected delta timestamps in trace result
#54030 Incorrect timestamps are saved on the front panel
#54093 Incorrect power check on spot/sweep panel (Web)
#54138 Cannot abort when READ?/FETC? is in progress for long time