Keysight Webinars

Original Webinar Date: April 26, 2022

The aerospace and defense industry is racing to develop new systems and capabilities. A key to achieving faster, lower-cost development is a Model-based Engineering (MBSE) approach, integrating data through models and predicting performance through ‘digital twin’ architectures. In this session, we will discuss how Keysight’s PathWave System Design software connects to and enables your MBSE flow. It also covers how critical it is to link simulation and measurements to achieve these goals.

Original Webinar Date: March 30, 2022

Join our webinar with Robert Stephens to learn how Keysight’s extensive portfolio of 5G test equipment will enable prospective NTN vendors to accelerate their innovations in #5G #non-terrestrial networks.

Original Dates: March 14, 21 and 28 2022

Check in between March 14 and March 28 as our Keysight experts release a new presentation every week exploring different EMSO related topics.

Register now for one or all three and we will let you know when they are available to view.

Original Webinar Date: March 15, 2022

Register today for part one of Keysight’s VNA Active Device Characterization Essentials webinar series to learn about the benefits of VNA modulation distortion characterization for reliable measurement repeatability in real-world test conditions.

Original Webinar Date: February 16, 2022

Learn about SCALABLE’s Network Digital Twin approach and how this new technology is impacting how we protect ourselves against cyber-attacks in complex multi-domain networks. 

Original Webinar Date: February 9, 2022

Learn how Keysight Quantum Engineering Solutions is helping hardware leaders and industry users achieve the true capabilities of quantum computing.

Original Webinar Date: September 23, 2021
Duration: 3 hours

Topics Covered

• Advanced Signal Analysis and 5G Network Test (50 minutes)
• 5G for Satellite Communications (45 minutes)
  
• Accelerating Innovations in 5G Vehicles  (20 minutes)
  
• 5G NTN Link Emulation with S8825A Satellite and Aerospace Channel Emulation Toolset (28 minutes)
  

View full agenda

Original Webinar Date: September 30, 2021
Duration: 5 hours

Topics Covered

• Time to Digital Converters for Quantum Sensing Applications (17 minutes)
  
• Low Noise Processes and Characterization (45 minutes) 
  
• Phase-Noise Theory (45 minutes) 
  
• Phase Noise Measurement from DC to mmWave  (45 minutes) 
  
• Simplifying VNA Measurement Setup and Optimization of Complex Active RF Devices (57 minutes) 
  

View full agenda

Original Webinar Date: October 7, 2021
Duration: 2:30 hours

Topics Covered

• High Bandwidth Oscilloscope for Multi-port Coherent RF Pulse Analysis (50 minutes)
  
• Modern Deceptive Jamming (DRFM) Design  (50 minutes)
  
• Developing Spectrum Intelligence to Advance Frequency Management  (30 minutes)
  

View Full Agenda

Original Webinar Date: September 15, 2021

Learn how to build and verify your dynamic SatCom system performance using a ‘digital twin’ created using PathWave System Design from Keysight and STK from AGI, an Ansys Company.

Original Webinar Date: April 20, 2022

Until now, doing EMI of simulations required expertise in electromagnetics. In this webinar, we will discuss how to overcome this challenge via post-layout simulation using Keysight's power electronics simulation software.

Fecha de Transmissión 16 de Marzo, 2022

En este webinar haremos un recorrido por las formas más comunes de configurar un formato de trigger para capturar puntos específicos de una señal -  desde un simple pulso o evento repetitivo hasta capturar complejos comandos embebidos en un protocolo serial.

Además, exploraremos diferentes herramientas del osciloscopio y puntas de prueba que nos ayudarán a depurar nuestros problemas y fallos de diseño.

¿Te interesa hacer este recorrido técnico con nosotros?

Fecha de Transmissión March 10, 2022

Cuáles son los factores más importantes que debo de considerar en mi banco de prueba remoto. Qué tipo de instrumentos de medición y software requiero para la integración y funcionamiento de mi banco de prueba modern. Cómo puedo administrar desde la nube las sesiones de trabajo para eficientar el uso de mis bancos de prueba.

Fecha de Transmisión: February 23, 2022

Conheça esta nova linha de equipamentos Smart Bench Essentials!

A linha Smart Bench Essentials é composta por instrumentos fundamentais para sua bancada: Osciloscópio, Gerador de Funções, Fonte de Alimentação e Multímetro. Cada equipamento é projetado para te ajudar a superar os desafios do dia a dia, sem pesar no seu bolso.

As interfaces intuitivas e unificadas facilitam a usabilidade e a aprendizagem e, combinando a densidade de funções, é possível utilizá-los nas mais diversas aplicações industriais ou educacionais.

A conectividade USB e LAN, padrão nestes instrumentos, te auxilia nos desafios de conectividade remota e automação de testes. Além do software BenchVue para uma experiência completa de controle via PC.

Com esta combinação de recursos e preço, ficará difícil não os ter em sua bancada!

Fecha de Transmisión: November 24, 2021
Ahora disponible on-demand

Abstract: El desarrollo de nuevas tecnologías y nuevos estándares en la industria ha traído como consecuencia que los equipos de medición innoven en tecnología. Es común escuchar nuevos términos referidos al suministro de alimentación como: secuencia de arranque, generación de pulsos de potencia, modo lista, manejo de salida en corriente constante, y muchos otros.

Las fuentes de alimentación se han modernizado para cumplir con los nuevos retos en el suministro de energía; ya no solo proveen un voltaje y una corriente, hoy día una fuente de alimentación moderna puede desempeñar muchos roles en una estación de prueba: medir, registrar datos, interrumpir el suministro ante una eventualidad, limitar el suministro, compensar, entre otras posibilidades.

¿Quieres saber cómo sacar el máximo provecho de una fuente de alimentación inteligente?

Original Webinar Date: October 26, 2021

Abstract: Please join this insightful Keysight webinar to learn what qualities are characteristic of excellent precision bench instruments and how they can solve some of your more stringent bench application challenges.

Original Webinar Date: October 19, 2021

We’ll show examples of tools that can facilitate instrument programming and cover application-specific software that can greatly simplify complex, power testing tasks.

Original Webinar Date: August 24, 2021

In this webinar, Keysight’s Power Integrity Lead Kenny Johnson will discuss the importance of power integrity-related measurements like PDN impedance, power rail integrity, PMIC Power Sequencing, PSRR, control loop response, static/dynamic loads (current), and radiated emission.  He will also include a demonstration using the new 8-channel Infiniium MXR-series.

This webinar covers power integrity measurements and is part 5 of Keysight’s 7-part All About Power webinar series. 

Original Webinar Date: July 21, 2021

Power semiconductors are essential in power converter design, but data sheets often do not provide sufficient information for the circuit designer. This webinar is targeted at power circuit designers who may not have extensive power semiconductor knowledge, but who would like to understand better how to select the right power semiconductors to meet their converter design needs. 

Original Webinar Date: June 23, 2021

This webinar will focus on the practical aspects of using power supplies and electronic loads.  If you’ve ever wanted to optimize your power instrument for your application, then the following topics will be of great interest to you.  

• Eliminating Ohmic line drop
  
• Operating electronic loads near zero volts
• Connecting supplies and loads in series and parallel
• Using built-in protection features

Original Webinar Date: May 26, 2021

We will discuss various types of sources such as two-quadrant power supplies, source measurement units (SMUs), and regenerative power supplies.  We’ll also review DC electronic load operation and applications. To enable the selection of the right power source and electronic load for your application, our Keysight expert will offer tips on interpreting specification sheets and determining the right power solution for the given task. 

Original Webinar Date: April 28, 2021

In this webinar, we’ll cover theoretical topics of electrical power including…

• Resistance and resistivity
• RMS power, real versus apparent power (power factor)
• AC power (resistive, capacitive, and inductive loading)
• Power transmission and three-phase power. 
• Power conversion (e.g.  AC-to-DC and DC-to-DC)

Original Webinar Date: April 13, 2021

Performing current vs. voltage characterization on devices and materials at very low current levels presents a unique set of measurement challenges. Normal measurement issues such as noise, transient signals and cabling and fixturing parasitics are much harder to solve when dealing with currents in the femtoamp range. In addition, many cutting-edge materials have extremely high resistances that conventional DMMs and source/measurement units (SMUs) cannot measure.  In this seminar Keysight will explain the measurement techniques, tricks and tools necessary to measure currents down to 0.01 femtoamps and resistances up to 10 Peta Ohms with both high measurement confidence and repeatability.

Original Webinar Date: April 20, 2022

Join Keysight principal program manager Rick Eads, member of the PCI-SIG® board of directors, as he discusses the latest PCIe® 6.0 developments and what you need to consider when evaluating your PCIe 6.0 designs.

April 6 and 7, 2022

For those who can’t attend DesignCon in person, don’t worry, we’ve got you covered. Get to know our booth from the comfort of your own office or home. The Keysight team will be live from the show floor on April 6 at 1:00 p.m. Pacific Time. We will take you on a 30-minute interactive journey through each demo station. You’ll feel like you’re in the booth with us.

Original Webinar Date: March 24, 2022

This last webinar in the High-Speed Digital Series will teach you about Forward Error Correction (FEC). FEC can effectively eliminate data loss (frame loss) in systems with moderately high Bit Error Rates (BER) of 1E-4 or more. However, in real systems, errors sometimes occur in bursts and can lead to FEC failure and non-zero frame loss ratio (FLR).

Original Webinar Date: March 17, 2022

This third session in the High-Speed Digital Webinar Series will be a practical discussion of IEEE 802.3ck (100gbps/lane) physical layer conformal testing for both Tx and Rx. 100G silicon is merging from the early specifications and a world of simulation. This discussion will help bridge the gap between simulation and physical layer evaluation of SerDes design and conformance testing.

Original Webinar Date: February 22, 2022

Join this second session in the High-Speed Digital Webinar Series to help you better understand the latest updates in the Type-C ecosystem, which includes USB, Display Port (DP), and Thunderbolt.

Original Webinar Date: February 17, 2022

Whether working on a USB4 IP, silicon, peripheral, or cable design, ensuring compliance to the latest standard can be complex and time consuming. USB4 connections have up to four channels of simultaneous data transfer and enhanced power delivery for bi-directional device charging. You need solutions to test, debug, and characterize your design from a partner that understands the complexity of these connections. Join us as we discuss how Keysight solutions support each stage of the USB4 design cycle.

Original Webinar Date: February 15, 2022

This webinar is the first in our High-Speed Digital Webinar Series and will help you better understand some of the key challenges of moving from NRZ to PAM4 technology along with new measurement requirements for transmitter and receiver testing.

Original Air Date: January 13, 2022

Avoid costly retrofits or schedule slippage with multiple re-spins. Start early in the design to select the right capacitors and meet a desired power integrity target impedance. Learn how to utilize 3DEM simulation and understand the impact of parasitics and optimize your design with a digital twin.

Original Air Date: January 12, 2022

Jit Lim provides an overview of USB4 along with an update on the latest developments with the standard. Hear about what you need to consider when testing, debugging, and characterizing your USB4 designs.

Western Canada - Original Webinar Date: November 30, 2021
Eastern Canada -  Original Webinar Date: December 2, 2021

Join us for a virtual high-speed digital seminar. Our technical experts and local application engineers will be online to answer your questions live and demonstrate key topics. Sessions include: 

• Advanced Testing Challenges at 32GBaud PAM4 with PCIe 6.0
• Next Gen Development in Type-C Ecosystem
• Physical Layer Validation Challenges of Characterizing 100Gbps/lane Designs
• Solving Your Forward Error Correction Problems

This webinar briefly touches on transmission line fundamentals and then focuses on practical ways to troubleshoot and improve physical layer components inside the internet infrastructure. 

Learn about oscilloscopes and probing technology from the ground up.

Original Webinar Date: April 28, 2022

Learn about the latest innovations that you can apply to your Silicon-based device compact model extraction flow.

April 27, 2022
Time: 10:00 a.m. PT / 1:00 p.m. ET

Until now, doing EMI of simulations required expertise in electromagnetics. In this webinar, we will discuss how to overcome this challenge via post-layout simulation using Keysight's power electronics simulation software.

Original Webinar Date: March 31, 2022

Join to discuss a new workflow that includes post-layout simulation which integrates both circuit and Electromagnetic (EM) analysis.

We will cover these key learnings:

• Learn about wide-bandgap semiconductors and its role in power electronics.
• Understand the new design challenges of wide bandgap semiconductors in SMPS.
• Learn a new EM workflow to overcome these challenges.
• Understand how a digital reference design can accelerate your time to market.
• See Keysight's solution in action: PathWave ADS and PEPro with Reference Designs.

Original Webinar Date: February 10, 2022

The automotive industry applies stringent requirements for EMI with CISPR 25 to avoid disturbances in a vehicle. You will want to capture any issue with your design prior to building hardware. However, SPICE is not accurate enough and general-purpose EM simulators are time consuming and complex to use. Learn how to explore and mitigate EMI noise sources with PathWave ADS with PIPro.

Original Webinar Date: January 25, 2022

Switched-mode power supply (SMPS) design is rapidly evolving with the emergence of wide bandgap semiconductors such as silicon carbide (SiC) and gallium nitride (GaN) power devices. Higher switching speeds together with the layout of a printed circuit board (PCB) can become a source of electromagnetic interference (EMI). This challenge frustrates many power electronics designers.

To overcome this challenge, a designer needs to identify potential EMI problems in simulation. Until now, this required expertise in electromagnetics. In this webinar, we will discuss how to overcome this challenge.

Original Webinar Date: December 16, 2021

Designers need to balance material selection and PCB fabrication options, together with design strategies for vias, connectors and channels. This webinar covers a simulation process that SECO Italy has undertaken to successfully design an embedded system with a small form-factor, and the right price-point.

Original Webinar Date: September 28, 2021

Attendees of this webinar will:

• Learn an approach for 5G / 6G system architects to use in advanced channel modeling.
• Understand the process of characterizing, modeling, and visualizing these channels. 
• See examples of enhanced channel usage in system simulation.

Original Webinar Date: September 15, 2021

Learn about wide-bandgap semiconductors and their role in power electronics

• Understand the new design test challenges of wide bandgap semiconductors in switch-mode power supplies
• Learn a new Electromagnetic(EM) workflow to over these challenges
• See Keysight's solution in action (PathWave ADS and PEPro and Reference Designs) 

Original Webinar Date: July 22, 2021

This seminar will address simulation methodologies that can enable and help in this characterization and validation flow of USB4. Use of IBIS-AMI models and bit-by-bit simulations which allow the representation of non-linear equalization blocks helps system designers to accurately predict their system’s performance. We will also talk about simulation methodologies for multi-level signaling.

Original Webinar Date: June 30, 2021

Join Keysight’s Rick Eads and Pegah Alavi as they discuss the latest advances in simulation and test of PCIe 5.0, with a sneak peek of what is coming in PCIe 6.0.

Original webinar date: June 3, 2021

Design for the Next-Generation of Reliable, High-Performance Memory Systems

Learn about:

• Trends and Market Challenges in Electronic Design Workflows
• What’s Next for DDR5 Memory and the Road to DDR6
• Northrop Grumman Case Study: Rigorous Design Analysis of a DDR4 DIMM-Based System
• Introducing PathWave ADS 2022 for Next-Generation Memory

Original Webinar Date: May 27, 2021

Learn about the Most Advanced RF-Phased Array Design and Modeling Platform

 Learn about:

• Trends and Market Challenges in Electronic Design Workflows
• Escape Velocity – Using Modeling and Simulation to Enter a New Design Orbit
• Introducing PathWave System Design 2022

Original Webinar Date: May 25, 2021

Achieve Consistent RF Design Wins

Agenda:

•   Electronics Design Workflow Evolution
• RF and Microwave Industry Insights: Three Key Design Challenges
• PathWave Design 2022 for RF and Microwave

Original Webinar Date: October 28, 2021

Key Learnings:

• Using Python as a translation tool to unlock data from different sources
• Using Advanced Design System’s Data Display to gain insight from simulation and measured data
• Practical Examples of real-life challenges and solutions