Copyright (C) 2012 Agilent Technologies, Inc. Table of Contents: Agilent May 8, 2012 ================== 1. Operating System versions 2. Installation 3. Agilent MD1 File List 4. Releases History ============================================================================= 1. Operating System versions: ======================================== 32-bit OS: Windows XP Windows Vista Windows 7 Linux with kernel 2.6 & 3.0 64-bit OS: Windows XP64 Windows Vista64 Windows 7 64 Linux with kernel 2.6 & 3.0 ============================================================================= 2. Installation: ================ >> Windows operating system: You must have administrator rights to install the Agilent MD1 High-Speed Digitizer software. Depending on your User Account Control Settings, you could be notified in the User Access Control dialog to accept that the installer will make changes in your computer. Depending on the High-Speed Digitizer product, there are 2 installations options: 1. Install MD1 Software The latest Agilent IO Libraries Suite must be installed prior to installing Agilent MD1 High-Speed Digitizer software. Install it from its respective CD (shipped with your product) or install it from the web at: www.agilent.com/find/iosuite 2. U1084A Installation The Agilent IO Libraries Suite is not required. This installation also support the U106x, U107x and U108x digitizers. >> Linux operating system: Please follow the instructions in the README file from the Linux folder. >> Support Should you encounter any installation problem, a list of contact information is available from: http://www.agilent.com/find/assist. ============================================================================= 3. Agilent MD1 File List: ========================= TargetDir = %ProgramFiles%\Agilent\MD1 on 32-bit OS TargetDir = %ProgramFiles(x86)%\Agilent\MD1 on 64-bit OS IviRootDir32 = %ProgramFiles%\IVI Foundation\IVI on 32-bit OS IviRootDir32 = %ProgramFiles(x86)%\IVI Foundation\IVI on 64-bit OS IviRootDir64 = %ProgramFiles%\IVI Foundation\IVI on 64-bit OS SystemRoot = %SystemRoot% Destination Directory = \bin (executable) AcqEepromProg.exe (executable) AgMD1SFP.exe (executable) AgMD1SFP5.exe (x64 executable) AgMD1SFP5_64.exe (Agilent components) AqISl5.exe (Agilent components) AqSCl4.dll (executable) CalLogGen.exe (x64 executable) CalLogGen_64.exe (executable) GeoMapper.exe (CVI run-time engine) cvi*.dll (needed by AgMD1SFP) cvirte folder (with bin and fonts folders) (Qt component) Qt*.dll Destination Directory = \Driver (Low Level Driver) agmd1.cat, agmd2.cat (Low Level Driver) AgMD1.inf, AgMD2.inf (Win32 Driver) AgMD1.sys, AgMD2.sys (x64 Driver) AgMD1_64.sys, AgMD2_64.sys AgMD1Resources.dll AgMD1Translation.dll AgMD1Translation_64.dll AgMD2Resources.dll Destination Directory = \Help MD1_SFP_Help.chm M9xxx_Datasheet.pdf M9xxx_StartupGuide.pdf Destination Directory = \LabVIEW Driver 8.x\Agilent MD1 20xx\Agilent MD1 Destination Directory = \LabVIEW Driver Help AgMD1_LabVIEW_Help.chm Destination Directory = \Bin AgMD1.dll AgMD1Fundamental.dll AqDrv4.dll AqMeasStd.dll Destination Directory = \Bin AgMD1_64.dll AgMD1Fundamental_64.dll AqDrv4_x64.dll AqMeasStd_64.dll Destination Directory = \System32 AgMD1Resources.dll AgMD2Resources.dll AgMD1Translation.dll AgMD1Translation_64.dll Destination Directory = \System32\Drivers AgMD1.sys AgMD1_64.sys AgMD2.sys AgMD2_64.sys ============================================================================= 4. Releases History: ==================== Agilent MD1 1.10.6 (May, 2012) ============================== Release Notes: -------------- - New AgMD1 IVI driver (see associated Readme for details) - Update and fixes of the LabVIEW Examples. - Fixed problems with channel combination on M9703A. - U1084xxx Zero Suppress: Fixed acquisitions and calibration fail when invertData is enabled. - M9703A: Fixed Acqrs_calRequired does not return expected result. - DC440: Fixed external trigger 1 MOhm does not work with ext clk. - New firmware files: M9703ADPULX2.bit, SC240StreamHRODL.bit, TC890.bit, u1084_ave.vme, u1084_custom_noDDR.vme, u1084_dig.vme, u1084_fdk_noDDR.vme, u1084_tdc.vme. autorun.exe 1.10.38.6 MD1_Setup.exe 1.10.38.6 IVI Driver 1.3.1.0 LabVIEW Driver 1.0.16 AcqEepromProg.exe 1.13.1.403 AgMD1.dll 1.3.1.0 AgMD1.sys 1.22.1.398 AgMD1Fundamental.dll 5.4.4.199 AgMD1Fundamental_64.dll 5.4.4.200 AgMD1Resources.dll 80.0.14518.0 AgMD1SFP.exe 1.10.2.0 AgMD1SFP5.exe 5.3.3.212 AgMD1SFP5_64.exe 5.3.3.213 AgMD1Translation.dll 1.1.0.4078 AgMD1Translation_64.dll 1.1.0.4077 AgMD1_64.dll 1.3.1.0 AgMD1_64.sys 1.22.1.398 AgMD2.sys 80.1.14931.0 AgMD2Resources.dll 80.1.14931.0 AgMD2_64.sys 80.1.14931.0 AqDrv4.dll 5.4.4.199 AqDrv4_x64.dll 5.4.4.200 AqISl5.dll 5.6.1.3030 AqMeasStd.dll 1.4.6.1899 AqMeasStd_64.dll 1.4.6.1900 AqSCl4.dll 4.3.4.1412 CalLogGen.exe 2.4.0.13593 CalLogGen_64.exe 2.4.0.13593 GeoMapper.exe 1.8.0.6986 AC210.bit B AC240.bit B AC240FFT2GSs.bit B AC240mem.bit A AP100FPGA1_AP200FPGA1and3.bit H AP100FPGA2_AP200FPGA2and4.bit H AP101FPGA1_AP201FPGA1and3.bit R2.08 AP101FPGA2_AP201FPGA2and4.bit R2.08 AP240_AP235_AP210_AP205.bit B AP240_AP235_AP210_AP205_AdvTDC.bit R2.04 AP240_AP235_AP210_AP205_Averager.bit F AP240_AP235_AP210_AP205_SSR.bit R2.04 DC440_DC438_DC436.bit R1.02 DC440_DC438_DC436_RevD.bit R4.00 DP310_DP308_DP306.bit R1.02 DP310_DP308_DP306_RevD.bit R4.00 m9202_ddc.vme 2.00 M9703ADPULX2.bit 1.0.128 M9703ADPUSX3.bit 1.0.134 SC210.bit B SC210stream2.bit V2.01 SC240.bit B SC240Str1.bit A SC240Stream2.bit B SC240Stream12.bit V2.3 SC240StreamHRODL.bit V2.8 TC840.bit E TC842.bit B TC890.bit E u1084_ave.vme 2.0 u1084_custom_noDDR.vme 1.1 u1084_dig.vme 3.0 u1084_fdk_noDDR.vme 1.0 u1084_tdc.vme 2.0 ----------------------------------------------------------------------------- Agilent MD1 1.9.7 (February 9, 2012) ==================================== Release Notes: -------------- - New AgMD1 IVI driver (see associated Readme for details) - Fixed uninstall of device driver to remove all components. - Fixed U10xxA installation which was incorrectly requiring the IO Libraries Suite and VISA Shared Components. - Fixed C_Example1.vcproj x64 configuration. Changes since release 1.9.5: autorun.exe 1.9.7 IVI Driver 1.2.2.0 AgMD1.dll 1.2.2.0 AgMD1_64.dll 1.2.2.0 ----------------------------------------------------------------------------- Agilent MD1 1.9.5 (January 19, 2012) ==================================== Release Notes: -------------- - M9703A support. - Updated LabVIEW and IVI drivers. - New firmware files: u1084_ave_01281580.vme (replaces u1084_ave_01241581.vme) M9703ADPULX2.bit M9703ADPUSX3.bit m9202_ddc_02000381.vme (Windows only) - M9202A Streaming support. - Added save/load of calibration constants for M9202A. - Fixed ML_Example1.m. - Improved calibration algorithm. - Improved U1071A switching time between input full scale ranges. - Fixed U1084A Averager readout in Real64 format with inverted data. autorun.exe 1.9.5 MD1_Setup.exe 1.16.0.435 IVI Driver 1.2.1.0 LabVIEW Driver 1.0.12 AcqEepromProg.exe 1.12.1.815 AgMD1.dll 1.2.1.0 AgMD1.sys 1.21.0.2360 AgMD1Fundamental.dll 5.3.3.40 AgMD1Fundamental_64.dll 5.3.3.41 AgMD1Resources.dll 80.0.14518.0 AgMD1SFP.exe 1.9.5.0 AgMD1SFP5.exe 5.2.3.1513 AgMD1SFP5_64.exe 5.2.3.1514 AgMD1Translation.dll 1.1.0.2806 AgMD1Translation_64.dll 1.1.0.2806 AgMD1_64.dll 1.2.1.0 AgMD1_64.sys 1.21.0.2360 AgMD2.sys 80.1.14931.0 AgMD2Resources.dll 80.1.14931.0 AgMD2_64.sys 80.1.14931.0 AqDrv4.dll 5.3.3.40 AqDrv4_x64.dll 5.3.3.41 AqISl5.dll 5.6.1.1826 AqMeasStd.dll 1.4.6.567 AqMeasStd_64.dll 1.4.6.567 AqSCl4.dll 4.3.3.2643 CalLogGen.exe 2.4.0.9635 CalLogGen_64.exe 2.4.0.9636 GeoMapper.exe 1.8.0.4935 AC210.bit B AC240.bit B AC240FFT2GSs.bit B AC240mem.bit A AP100FPGA1_AP200FPGA1and3.bit H AP100FPGA2_AP200FPGA2and4.bit H AP101FPGA1_AP201FPGA1and3.bit R2.08 AP101FPGA2_AP201FPGA2and4.bit R2.08 AP240_AP235_AP210_AP205.bit B AP240_AP235_AP210_AP205_AdvTDC.bit R2.04 AP240_AP235_AP210_AP205_Averager.bit F AP240_AP235_AP210_AP205_SSR.bit R2.04 DC440_DC438_DC436.bit R1.02 DC440_DC438_DC436_RevD.bit R4.00 DP310_DP308_DP306.bit R1.02 DP310_DP308_DP306_RevD.bit R4.00 m9202_ddc_02000381.vme 2.00 M9703ADPULX2.bit 1.0.128 M9703ADPUSX3.bit 1.0.134 SC210.bit B SC210stream2.bit V2.01 SC240.bit B SC240Str1.bit A SC240Stream2.bit B SC240Stream12.bit V2.3 TC840.bit E TC842.bit B TC890.bit D u1084_ave_01281580.vme 1.40 u1084_dig_02380181.vme 2.56 u1084_tdc_01161181.vme 1.22 ----------------------------------------------------------------------------- Agilent MD1 1.7.3 (September 6, 2011) ===================================== Release Notes: -------------- - U1084A support. - Kernel driver update. - Update of IVI and LabVIEW drivers. - Fixed M9202 do not have the T0 correctly adjusted if no calibration done. - Fixed 'Hibernate' protection bypassed. - Increased default settling time for M9202A. - New firmware files: u1084_ave_01241581.vme u1084_dig_02380181.vme u1084_tdc_01161181.vme autorun.exe 1.7.3 MD1_Setup.exe 1.16.0.435 IVI Driver 1.1.0.0 LabVIEW Driver 1.0.8 AcqEepromProg.exe 1.10.1.289 AgMD1.dll 1.1.0.0 AgMD1.sys 1.19.1.269 AgMD1Fundamental.dll 5.1.2.10 AgMD1Fundamental_64.dll 5.1.2.11 AgMD1Resources.dll 80.0.14518.0 AgMD1SFP.exe 1.7.1.0 AgMD1SFP5.exe 5.0.1.1434 AgMD1SFP5_64.exe 5.0.1.1435 AgMD1Translation.dll 1.1.0.1648 AgMD1Translation_64.dll 1.1.0.1647 AgMD1_64.dll 1.1.0.0 AgMD1_64.sys 1.19.1.269 AqDrv4.dll 5.1.2.10 AqDrv4_x64.dll 5.1.2.11 AqISl5.dll 5.6.1.531 AqMeasStd.dll 1.4.5.856 AqMeasStd_64.dll 1.4.5.857 AqSCl4.dll 4.3.3.1218 CalLogGen.exe 2.4.0.5203 CalLogGen_64.exe 2.4.0.5204 DriverTest.exe 5.0.1.1432 DriverTest_64.exe 5.0.1.1433 GeoMapper.exe 1.8.0.2646 AC210.bit B AC240.bit B AC240FFT2GSs.bit B AC240mem.bit A AP100FPGA1_AP200FPGA1and3.bit H AP100FPGA2_AP200FPGA2and4.bit H AP101FPGA1_AP201FPGA1and3.bit R2.08 AP101FPGA2_AP201FPGA2and4.bit R2.08 AP240_AP235_AP210_AP205.bit B AP240_AP235_AP210_AP205_AdvTDC.bit R2.04 AP240_AP235_AP210_AP205_Averager.bit F AP240_AP235_AP210_AP205_SSR.bit R2.04 DC440_DC438_DC436.bit R1.02 DC440_DC438_DC436_RevD.bit R4.00 DP310_DP308_DP306.bit R1.02 DP310_DP308_DP306_RevD.bit R4.00 SC210.bit B SC210stream2.bit V2.01 SC240.bit B SC240Str1.bit A SC240Stream2.bit B SC240Stream12.bit V2.3 TC840.bit E TC842.bit B TC890.bit D u1084_ave_01241581.vme 1.36 u1084_dig_02380181.vme 2.56 u1084_tdc_01161181.vme 1.22 ----------------------------------------------------------------------------- Agilent MD1 1.3.1 (December 20, 2010) ===================================== Release Notes: -------------- First release. - M9202A with Digital Down Converter support. autorun.exe 1.3.1 MD1_Setup.exe 1.3.1 IVI Driver 1.0.9 LabVIEW Driver 1.0.6 AgMD1.dll 1.0.9.0 AgMD1Fundamental.dll 5.0.12.302 AqDrv4.dll 5.0.12.302 AqMeasStd.dll 1.4.5.2 AgMD1_64.dll 1.0.9.0 AgMD1Fundamental_64.dll 5.0.12.303 AqDrv4_x64.dll 5.0.12.303 AqMeasStd_64.dll 1.4.5.1 AgMD1SFP.exe 1.3.1.0 AqISl5.dll 5.5.1.1 AqSCl4.dll 4.3.3.102 GeoMapper.exe 1.7.1.264 AcqEepromProg.exe 1.9.1.269 CalLogGen.exe 2.3.1.537 CalLogGen_64.exe 2.3.1.538 AgMD1.sys 1.18.4.161 AgMD1_64.sys 1.18.4.161 AgMD1Resources.dll 80.0.14116.1 AgMD1Translation.dll 1.0.4.19 AgMD1Translation_64.dll 1.0.4.18 AC210.bit B AC240.bit B AC240FFT2GSs.bit B AC240mem.bit A AP100FPGA1_AP200FPGA1and3.bit H AP100FPGA2_AP200FPGA2and4.bit H AP101FPGA1_AP201FPGA1and3.bit R2.08 AP101FPGA2_AP201FPGA2and4.bit R2.08 AP240_AP235_AP210_AP205.bit B AP240_AP235_AP210_AP205_AdvTDC.bit R2.04 AP240_AP235_AP210_AP205_Averager.bit F AP240_AP235_AP210_AP205_SSR.bit R2.04 DC440_DC438_DC436.bit R1.02 DC440_DC438_DC436_RevD.bit R4.00 DP310_DP308_DP306.bit R1.02 DP310_DP308_DP306_RevD.bit R4.00 SC210.bit B SC210stream2.bit V2.01 SC240.bit B SC240Str1.bit A SC240Stream2.bit B SC240Stream12.bit V2.3 TC840.bit E TC842.bit B TC890.bit D