34980A using Agt3494A and VBNET Measurement Example Program
This program sets the 34980A for a simple scan that makes both DCV and type J
thermocouple temperature measurements. The program also checks the instrument and
module identification to make sure there is communication between the 34980A and
the computer, and the correct module is installed. The returned data is entered
into a list box.
This program uses the Agilent 3494A control to program the instrument. The control
is supplied by the Agt3494ALib.ocx file that comes with the Intuilink for Multimeter
The program was developed in Microsoft® Visual Basic .NET 2003 version 7.1
Date: September 21, 2005
Language: Microsoft(r) Visual Basic .NET 2003 version 7.1
Operating System: Windows(r) NT 4.0, 2000 Professional, XP
Program Required: Agilent IntuiLink for Multimeters version 1.1
Agilent IO Library Suite 14.0 or above
Microsoft, Windows, NT, XP are registered trademarks of Microsoft Corporation
Copyright (c) 2005 Agilent Technologies Inc. All rights reserved.
You have a royalty-free right to use, modify, reproduce and distribute these example
files (and/or any modified version) in any way you find useful, provided that you
agree that Agilent has no warranty, obligations or liability for any Sample
Agilent Technologies will not modify the program to provide added
functionality or construct procedures to meet your specific needs.