What are you looking for?
Firmware for U1610A/U1620A Handheld Digital Oscilloscope
Data de lançamento | Versão | Descrição da Versão |
---|---|---|
2021-12-14 | 0.171.6 | Setup new firmware part number for fix the bug of Tmax and Tmin measurement error. |
Data de lançamento | Versão |
---|---|
2021-12-14 | 0.171.6 |
Version Description |
---|
Setup new firmware part number for fix the bug of Tmax and Tmin measurement error. |
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Como Baixar
Download the firmware zip file, unzip and copy the files updateNewATN.bin & updateNewATO.bin to a clean USB thumb drive (in root directory).
Como Instalar
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Plug the USB thumb drive into the handheld scope.
Step 2: Press User button and select -Host by toggling (pressing F1) the selection under the USB menu.
Step 3: Press User button and select Service by pressing F4 key.
Step 4: Select Update firmware by pressing F1 key.
Step 5: Choose OK to proceed with the firmware update.
Step 6: The unit will update the firmware and reboot automatically.
Do note that it will take approximately 1 minute to copy the files (DO NOT press OK repeatedly during this process).
Step 7: Firmware will be updated and system will reboot automatically.
Step 8: Press User and select System Information (F5) key to check the firmware revision as follows:-
- Firmware: 0.171.0.C (For 100MHz scope, U1610A)
- Firmware: 0.171.0.A (For 200MHz scope, U1620A)
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
Ensure the handheld scope is loaded with firmware version 130.4 or above before you proceed. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0.
Instrumentos Compatíveis
- U1610A,U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Como Baixar
Download the firmware zip file, unzip and copy the files updateNewATN.bin & updateNewATO.bin to a clean USB thumb drive (in root directory).
Como Instalar
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Plug the USB thumb drive into the handheld scope.
Step 2: Press User button and select -Host by toggling (pressing F1) the selection under the USB menu.
Step 3: Press User button and select Service by pressing F4 key.
Step 4: Select Update firmware by pressing F1 key.
Step 5: Choose OK to proceed with the firmware update.
Step 6: The unit will update the firmware and reboot automatically.
Do note that it will take approximately 1 minute to copy the files (DO NOT press OK repeatedly during this process).
Step 7: Firmware will be updated and system will reboot automatically.
Step 8: Press User and select System Information (F5) key to check the firmware revision as follows:-
- Firmware: 0.171.0.C (For 100MHz scope, U1610A)
- Firmware: 0.171.0.A (For 200MHz scope, U1620A)
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
Ensure the handheld scope is loaded with firmware version 130.4 or above before you proceed. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0.
Instrumentos Compatíveis
- U1610A,U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Como Baixar
Download the firmware zip file, unzip and copy the files updateNewATN.bin & updateNewATO.bin to a clean USB thumb drive (in root directory).
Como Instalar
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Plug the USB thumb drive into the handheld scope.
Step 2: Press User button and select -Host by toggling (pressing F1) the selection under the USB menu.
Step 3: Press User button and select Service by pressing F4 key.
Step 4: Select Update firmware by pressing F1 key.
Step 5: Choose OK to proceed with the firmware update.
Step 6: The unit will update the firmware and reboot automatically.
Do note that it will take approximately 1 minute to copy the files (DO NOT press OK repeatedly during this process).
Step 7: Firmware will be updated and system will reboot automatically.
Step 8: Press User and select System Information (F5) key to check the firmware revision as follows:-
- Firmware: 0.171.0.C (For 100MHz scope, U1610A)
- Firmware: 0.171.0.A (For 200MHz scope, U1620A)
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
Ensure the handheld scope is loaded with firmware version 130.4 or above before you proceed. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0.
Instrumentos Compatíveis
- U1610A,U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Como Baixar
Download the firmware zip file, unzip and copy the files updateNewATN.bin & updateNewATO.bin to a clean USB thumb drive (in root directory).
Como Instalar
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Plug the USB thumb drive into the handheld scope.
Step 2: Press User button and select -Host by toggling (pressing F1) the selection under the USB menu.
Step 3: Press User button and select Service by pressing F4 key.
Step 4: Select Update firmware by pressing F1 key.
Step 5: Choose OK to proceed with the firmware update.
Step 6: The unit will update the firmware and reboot automatically.
Do note that it will take approximately 1 minute to copy the files (DO NOT press OK repeatedly during this process).
Step 7: Firmware will be updated and system will reboot automatically.
Step 8: Press User and select System Information (F5) key to check the firmware revision as follows:-
- Firmware: 0.170.9.C (For 100MHz scope, U1610A)
- Firmware : 0.170.9.A (For 200MHz scope, U1620A)
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
Ensure the handheld scope is loaded with firmware version 130.4 or above before you proceed. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0.
Instrumentos Compatíveis
- U1610A,U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Como Baixar
Download the firmware zip file, unzip and copy the files updateNewATN.bin & updateNewATO.bin to a clean USB thumb drive (in root directory).
Como Instalar
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Plug the USB thumb drive into the handheld scope.
Step 2: Press User button and select Host by toggling (pressing F1) the selection under the USB menu.
Step 3: Press User button and select Service by pressing F4 key.
Step 4: Select Update firmware by pressing F1 key.
Step 5: Choose OK to proceed with the firmware update.
Step 6: The unit will update the firmware and reboot automatically.
Do note that it will take approximately 1 minute to copy the files (DO NOT press OK repeatedly during this process).
Step 7: Firmware will be updated and system will reboot automatically.
Step 8: Press User and select System Information (F5) key to check the firmware revision as follows:-
- Firmware: 0.170.6.C (For 100MHz scope, U1610A)
- Firmware : 0.170.6.A (For 200MHz scope, U1620A)
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
Ensure the handheld scope is loaded with firmware version 130.4 or above before you proceed. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0
Instrumentos Compatíveis
- U1610A,U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Como Baixar
Download the firmware zip file, unzip and copy the files updateNewATN.bin & updateNewATO.bin to a clean USB thumb drive (in root directory).
Como Instalar
- NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
- Step 1: Plug the USB thumb drive into the handheld scope.
- Step 2: Press "User" button and select "Host" by toggling (pressing F1) the selection under the USB menu.
- Step 3: Press "User" button and select "Service" by pressing F4 key.
- Step 4: Select "Update firmware" by pressing F1 key.
- Step 5: Choose OK to proceed with the firmware update.
-
Step 6: The unit will update the firmware and reboot automatically.
Do note that it will take approximately 1 minute to copy the files (DO NOT press "OK" repeatedly during this process). - Step 7: Firmware will be updated and system will reboot automatically.
-
Step 8: Press "User" and select "System Information" (F5) key to check the firmware revision as follows:-
- Firmware: 0.160.6.C (For 100MHz scope, U1610A)
- Firmware : 0.160.6.A (For 200MHz scope, U1620A)
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
Ensure the handheld scope is loaded with firmware version 130.4 or above before you proceed. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0.
Instrumentos Compatíveis
- U1610A, U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Como Baixar
Download the firmware zip file, unzip and copy the files “updateNewATN.bin” & “updateNewATO.bin” to a clean USB thumb drive (in root directory).
Como Instalar
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Plug the USB thumb drive into the handheld scope.
Step 2: Press “User” button and select “Host” by toggling (pressing F1) the selection under the USB menu.
Step 3: Press “User” button and select “Service” by pressing F4 key.
Step 4: Select “Update firmware” by pressing F1 key.
Step 5: Choose OK to proceed with the firmware update.
Step 6: The unit will update the firmware and reboot automatically.
Do note that system will takes approximately 1 minute for the copying process to take place (DO NOT press “OK” repeatedly during this process).Step 7: The unit will update the firmware and reboot automatically.
Step 8: Press “User” and select “System Information” (F5) key to check the firmware revision as follows:-
- Firmware: 0.160.3.C (For 100MHz scope, U1610A)
- Firmware : 0.160.3.A (For 200MHz scope, U1620A)
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
Ensure the handheld scope is loaded with firmware version 130.4 or above before proceed to version 150.9. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0
Instrumentos Compatíveis
- U1610A,U1620A
Como Baixar
Download the firmware zip file, unzip and copy the files updateNewATN.bin & updateNewATO.bin to a clean USB thumb drive (in root directory).
Como Instalar
NOTE:The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
1: Plug the USB thumb drive into the handheld scope.
2: Press User button and select Host by toggling (pressing F1) the selection under the USB menu.
3: Press User button and select Service by pressing F4 key.
4: Select Update firmware by pressing F1 key.
5: Choose OK to proceed with the firmware update.
6: The unit will update the firmware and reboot automatically.
Do note that system will takes approximately 1 minute for the copying process to take place (DO NOT press OK repeatedly during this process).
7: The unit will update the firmware and reboot automatically.
8: Press User and select System Information (F5) key to check the firmware revision as follows:-
-Firmware: 0.150.16.C (For 100MHz scope, U1610A)
-Firmware : 0.150.16.A (For 200MHz scope, U1620A)
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
Ensure the handheld scope is loaded with firmware version 130.4 or above before you proceed.You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0
Instrumentos Compatíveis
- U1610A,U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Como Baixar
Download the firmware zip file, unzip and copy the files “updateNewATN.bin” & “updateNewATO.bin” to a clean USB thumb drive (in root directory).
Como Instalar
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Plug the USB thumb drive into the handheld scope.
Step 2: Press “User” button and select “Host” by toggling (pressing F1) the selection under the USB menu.
Step 3: Press “User” button and select “Service” by pressing F4 key.
Step 4: Select “Update firmware” by pressing F1 key.
Step 5: Choose OK to proceed with the firmware update.
Step 6: The unit will update the firmware and reboot automatically.
Do note that system will takes approximately 1 minute for the copying process to take place (DO NOT press “OK” repeatedly during this process).Step 7: The unit will update the firmware and reboot automatically.
Step 8: Press “User” and select “System Information” (F5) key to check the firmware revision as follows:-
- Firmware: 0.150.9.C (For 100MHz scope, U1610A)
- Firmware : 0.150.9.A (For 200MHz scope, U1620A)
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
Ensure the handheld scope is loaded with firmware version 130.4 or above before proceed to version 150.9. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0
Instrumentos Compatíveis
- U1610A,U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Pre-requisite: Ensure the handheld scope is loaded with firmware version 130.4 or above before proceed to version 150.0. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0
Follow these steps to upgrade the firmware:
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Download the firmware.zip file from the website, unzip and copy the files “updateNewATN.bin” & “updateNewATO.bin” to a clean USB thumb drive (in root directory).
Step 2: Plug the USB thumb drive into the handheld scope.
Step 3: Press “User” button and select “Host” by toggling (pressing F1) the selection under the USB menu.
Step 4: Press “User” button and select “Service” by pressing F4 key.
Step 5: Select “Update firmware” by pressing F1 key.
Step 6: Choose OK to proceed with the firmware update.
Step 7: The unit will update the firmware and reboot automatically.
Do note that system will takes approximately 1 minute for the copying process to take place (DO NOT press “OK” repeatedly during this process).
Step 8: The unit will update the firmware and reboot automatically.
Step 9: Press “User” and select “System Information” (F5) key to check the firmware revision as follows:-
- Firmware: 0.150.0.C (For 100MHz scope, U1610A)
- Firmware : 0.150.0.A (For 200MHz scope, U1620A)
NOTE: Firmware update files “updateNewATN.bin” and “updateNewATO.bin” can only be used for one time update only. Users need to delete existing and copy a new set of files to a clean USB thumb drive if they want to upgrade for others handheld unit.
Como Baixar
See Above
Como Instalar
See Above
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
See Above
Instrumentos Compatíveis
- U1610A,U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Pre-requisite: Ensure the handheld scope is loaded with firmware version 130.4 or above before proceed to version 140.2. You are required to upgrade the handheld scope to version 130.4 if the current version is 126.1 / 128.21 / 129.0
Follow these steps to upgrade the firmware:
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Download the firmware.zip file from the website, unzip and copy the files “updateNewATN.bin” & “updateNewATO.bin” to a clean USB thumb drive (in root directory).
Step 2: Plug the USB thumb drive into the handheld scope.
Step 3: Press “User” button and select “Host” by toggling (pressing F1) the selection under the USB menu.
Step 4: Press “User” button and select “Service” by pressing F4 key.
Step 5: Select “Update firmware” by pressing F1 key.
Step 6: Choose OK to proceed with the firmware update.
Step 7: The unit will update the firmware and reboot automatically.
Do note that system will takes approximately 1 minute for the copying process to take place (DO NOT press “OK” repeatedly during this process).
Step 8: The unit will update the firmware and reboot automatically.
Step 9: Press “User” and select “System Information” (F5) key to check the firmware revision as follows:-
- Firmware: 0.140.2.C (For 100MHz scope, U1610A)
- Firmware : 0.140.2.A (For 200MHz scope, U1620A)
- FPGA : Design2_V2.2_R9_C (For 100MHz scope, U1610A)
- FPGA : Design2V2.3_R0_A. (For 200MHz scope, U1620A)
- Kernel : 2012.01.17 H
NOTE: Firmware update files “updateNewATN.bin” and “updateNewATO.bin” can only be used for one time update only. Users need to delete existing and copy a new set of files to a clean USB thumb drive if they want to upgrade for others handheld unit.
Como Baixar
See Above.
Como Instalar
See Above
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
See Above.
Instrumentos Compatíveis
- U1610A,U1620A
Always update your handheld oscilloscope with the latest firmware to maximize the performance of the instrument. Please follow all the instructions below step-by-step to ensure the firmware installation is successful through USB drive.
Caution:
Ensure there are sufficient power supply and no power interruption to the handheld scope during the firmware loading process.
It’s recommended to connect the power source to the handheld scope during the firmware loading process.
Follow these steps to upgrade the firmware and kernel system:
NOTE: The firmware upgrade will reset system settings and erase waveform setup. Only waveform traces can be retrieved in the new firmware version.
Step 1: Download the firmware.zip file from the website, unzip and save only the file “update.bin” into a clean USB thumb drive (in root directory).
Step 2: Plug the USB thumb drive into the handheld scope.
Step 3: Press “User” button and select “Host” by toggling (pressing F1) the selection under the USB menu.
Step 4: Press “User” button and select “Service” by pressing F4 key.
Step 5: Select “Update firmware” by pressing F1 key.
Step 6: Choose OK to proceed with the firmware update.
Step 7: The unit will update the firmware and reboot automatically.
Step 8: Delete the “Update.bin” from the thumb drive, and copy the following files into the same thumb drive.
- KernelB.bin
- KernelC.bin
- daqNewA.xsvf
- daqNewC.xsvf
Step 9: Repeat step 2 to step 6.
Do note that system will takes approximately 1 minute for the copying process to take place (DO NOT press “OK” repeatedly during this process).
Step 10: The unit will update the firmware and reboot automatically.
Step 11: Press “User” and select “System Information” (F5) key to check the firmware revision as follows:-
- Firmware: 0.130.4.C (For 100MHz scope, U1610A)
- Firmware : 0.130.4.A (For 200MHz scope, U1620A)
- FPGA : Design2_V2.2_R9_C (For 100MHz scope, U1610A)
- FPGA : Design2V2.3_R0_A. (For 200MHz scope, U1620A)
- Kernel : 2012.01.17 H
Como Baixar
See Above
Como Instalar
See Above
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows Vista
Pré-requisitos
See Above
Instrumentos Compatíveis
- U1610A,U1620A