N1010A FlexDCA Sampling Oscilloscope Software provides Oscilloscope, Eye/Mask, Jitter, and TDR measurement capabilities and is used to control compatible Keysight DCA instruments.

N1092A_B_C_D

The FlexDCA installer includes the latest updates* for:

  • FlexDCA software packages: N1010100A R&D, N1010200A MFG, and N1010300A SI
  • FlexPLL for phase-locked loop mesurements
  • FlexRT for optical measurements on UXR-Series Oscilloscopes
  • FlexOTO for optimization of optical measurements using DCA-M Series oscilloscopes

* Requires applicable software licenses with active support

No licenses are required for basic FlexDCA functionality. Trial licenses are available to evaluate licensed features before purchase: N1010100A, N1010200A, N1010300A, N1002000A, N1002014A, N1002048A, N1002128A

NOTICE: FLEXDCA SUPPORT FOR 86100D TO END SEPTEMBER 2024

FlexDCA A.07.80, planned for release September 2024, will no longer support installation on 86100D mainframes. For continued access to the latest FlexDCA updates, consider trading in your 86100D for an N1000A (trade-in offer). Contact your local Keysight representative to discuss options, www.keysight.com/find/contactus.

See N1010A FlexDCA 86100D Support Notice and FAQ for detailed information.

NOTES ON PREVIOUS VERSIONS

  • Compatibility mode is supported in A.06.81.26 and lower. See supported modules table to determine if a module is directly supported in FlexDCA.
  • 32-bit and 64-bit installers are available for A.06.03 and lower. A.06.40 and higher support 64-bit operating systems only.
  • 86100C connectivity is supported in A.05.80 and lower (86100C must be running firmware revision A.10.83).
  • Windows 11 is supported in A.07.40 and above.
  • Windows 10 is supported in A.05.00 and above.
  • Windows 7 is supported in A.05.00 and above.
  • Windows XP is supported in A.04.54 and lower.
Keysight는 가능한 최신 버전을 사용하는 것을 권장하며, 최신 버전에는 현재 사용 가능한 가장 최신 버그 수정 및 보안 패치가 포함되어 있습니다.
릴리스 날짜 버젼 버전 설명
2023-11-07 A.07.50.258 Adds Low SNR mode to the TDECQ equalizer, Pulse Fit Signal Processing, Fast Tuning mode for FlexOTO DUT power tuning, support for the M8199B AWG, updated TDR AFR wizard, hardware option CRX for the N1092-CDR, 12 edge jitter measurement improvements, and Extinction Ratio Correction Factors (ERCF). Multiple improvements and fixes for FlexOTO and FlexPLL.
릴리스 날짜 버젼
2023-11-07 A.07.50.258
Version Description
Adds Low SNR mode to the TDECQ equalizer, Pulse Fit Signal Processing, Fast Tuning mode for FlexOTO DUT power tuning, support for the M8199B AWG, updated TDR AFR wizard, hardware option CRX for the N1092-CDR, 12 edge jitter measurement improvements, and Extinction Ratio Correction Factors (ERCF). Multiple improvements and fixes for FlexOTO and FlexPLL.

다운로드 방법

Click the download button and save the installation file to the target machine or to a location available to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

FlexDCA

FlexOTO

FlexPLL

Download the Help Files (Includes FlexOTO and FlexPLL)

Download

Installs on: PC / Instrument

운영 체제

  • Windows 11
  • Windows 10
  • Windows 7 64-bit

선결 조건

  • Always install the latest Microsoft Windows updates before installing a new version of software.
  • To validate the installer file, check the SHA256 File Checksum: EC922AC98F921434E4DB28657BBFF2A986A0A9E9A74481A3280052A08FBC7463
  • For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate and the Sectigo SHA-2 Root USERTrust RSA Certificate is required.
  • .Net requires updated certificates to install. With a LAN connection, this certificate will update automatically during installation.

See FlexDCA Installation Troubleshooting Guide for additional information:

지원되는 계측기

  • N1000A, 86100D, N1002A, N109xx, N107xx

다운로드 방법

Click the download button and save the installation file to the target machine or to a location available to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

FlexDCA

FlexOTO

FlexPLL

Download

Installs on: PC / Instrument

운영 체제

  • Windows 11
  • Windows 10
  • Windows 7 64-bit

선결 조건

  • Always install the latest Microsoft Windows updates before installing a new version of software.
  • To validate the installer file, check the SHA256 File Checksum: 8B383ABDF2A853D9746371715CB3896BCFDA86EF997D3B4923412FB23333C552
  • For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate and the Sectigo SHA-2 Root USERTrust RSA Certificate is required.
  • .Net requires updated certificates to install. With a LAN connection, this certificate will update automatically during installation.

See FlexDCA Installation Troubleshooting Guide for additional information:

지원되는 계측기

  • N1000A, 86100D, N1002A, N109xx, N107xx

다운로드 방법

Click the download button and save the installation file to the target machine or to a location available to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

FlexDCA

FlexOTO

FlexPLL

Download

Installs on: PC / Instrument

운영 체제

  • Windows 11
  • Windows 10
  • Windows 7 64-bit

선결 조건

  • Always install the latest Microsoft Windows updates before installing a new version of software.
  • To validate the installer file, check the SHA256 File Checksum: 04545F49606318273278588DC31C8982A896254EC56A29829781EC48E2350C1B
  • For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate and the Sectigo SHA-2 Root USERTrust RSA Certificate is required.
  • .Net requires updated certificates to install. With a LAN connection, this certificate will update automatically during installation.

See FlexDCA Installation Troubleshooting Guide for additional information:

지원되는 계측기

  • N1000A, 86100D, N1002A, N109xx, N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

SHA256

 

 

8F33E42B0A89E42932280B0F37AAD57907F57258B2BF1309F168A9257628DC78

 

 

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10 64-bit
  • Windows 7 64-bit

선결 조건

  • For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’ for additional information.
  • Important! Install latest Microsoft Windows updates before installing this revision.
  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A, 86100D, N109xx, N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

SHA256

 

 

06D9C5B3CCCC43D73FD7FBB750742212E24CC5F3DD8BD390E2B6031C129C9CBB

 

 

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10 64-bit
  • Windows 7 64-bit

선결 조건

  • For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’ for additional information.
  • Important! Install latest Microsoft Windows updates before installing this revision.
  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A, 86100D, N109xx, N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10 64-bit
  • Windows 7 64-bit

선결 조건

  • For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’ for additional information.
  • Important! Install latest Microsoft Windows updates before installing this revision.
  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A, 86100D, N109xx, N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10 64-bit
  • Windows 7 64-bit

선결 조건

  • For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’ for additional information.
  • Important! Install latest Microsoft Windows updates before installing this revision.
  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A, 86100D, N109xx, N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10 64-bit
  • Windows 7 64-bit

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A, 86100D, N109xx, N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10 64-bit
  • Windows 7 64-bit

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A, 86100D, N109xx, N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10 64-bit
  • Windows 7 64-bit

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A, 86100D, N109xx, N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10
  • Windows 7 64-bit

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A, 86100D, N109xx, N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10
  • Windows 7 64-bit

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A 86100D N109xx N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions
     

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10
  • Windows 7 64-bit

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
     

지원되는 계측기

  • N1000A 86100D N109xx N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10
  • Windows 7 64-bit

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A 86100D N109xx N107xx

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10
  • Windows 7 64-bit

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A 86100D N109xx N107xx

다운로드 방법

  • Click the download button and save the appropriate upgrade file (32-bit or 64-bit) to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.

설치 방법

  1. Close all open programs and applications
  2. Install latest Microsoft Windows updates
  3. Run the installation package, following all prompts and instructions

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10
  • Windows 7 64-bit
  • Windows 7 32-bit
  • NOTE: FlexDCA versions released July 2019 or later will no longer support 32-bit operating systems

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.

지원되는 계측기

  • N1000A 86100D N1090A N1092A/B/C/D/E N1094A/B N1076A/B N1077A N1078A

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.

설치 방법

  • Close all open programs and applications.
    Run the installation package, following all instructions to install your new firmware version.

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10
  • Windows 7 64-bit
  • Windows 7 32-bit

선결 조건

  • Important! Install latest Microsoft Windows updates before installing this revision.

  • .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
     

지원되는 계측기

  • 86100D N1090A N1092A/B/C/D/E N1094A/B N1076A/B N1077A N1078A

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.

설치 방법

  • Close all open programs and applications.
    Run the installation package, following all instructions to install your new firmware version.
     

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 10
  • Windows 7 64-bit
  • Windows 7 32-bit

선결 조건

  • Information Not Available

지원되는 계측기

  • 86100D 86100C N1092A/B/C/D/E N1090A N1076A 7N1078A

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.

설치 방법

  • Close all open programs and applications.
    Run the installation package, following all instructions to install your new firmware version.
     

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 7 32-bit
  • Windows 8 64-bit
  • Windows 10

선결 조건

  • Information Not Available

지원되는 계측기

  • 86100D N1090A N1092x N1094x N1076A N1077A

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.

설치 방법

  • Close all open programs and applications.
    Run the installation package, following all instructions to install your new firmware version.
     

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 8
  • Windows 7
  • Windows 10

선결 조건

  • Install latest Microsoft Windows updates before installing this revision.
     

지원되는 계측기

  • 86100D N1090A N1092x N1094x N1076A N1077A

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.

설치 방법

  • Close all open programs and applications.
    Run the installation package, following all instructions to install your new firmware version.
     

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 8
  • Windows 7
  • Windows 10

선결 조건

  • Install all Windows updates prior to installing this upgrade.

지원되는 계측기

  • 86100D, N1090A, N1092x, N1076A, N1077A

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.

설치 방법

  • Close all open programs and applications.
    Run the installation package, following all instructions to install your new firmware version.
     

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 8
  • Windows 7
  • Windows 10

선결 조건

  • Install all Microsoft Windows updates before installing this firmware.

지원되는 계측기

  • 86100D, 86100C, N1090A, N4877A, N1092A/B/D

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.

설치 방법

  • Close all open programs and applications.
  • Run the installation package, following all instructions to install your new firmware version.

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 8
  • Windows 7

선결 조건

  • Install all Microsoft Windows updates before installing this firmware.

지원되는 계측기

  • 86100D 86100C N1090A

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.

설치 방법

  • Close all open applications.
  • Run the installation package, following all instructions to install your new firmware version.
     

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 7 64-bit
  • Windows 8 64-bit
  • Windows Vista 64-bit

선결 조건

  • None

지원되는 계측기

  • 86100D N1090A

다운로드 방법

  • Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
  • For best results on the 86100D mainframe, use the rear panel USB ports.

설치 방법

  • Close all open applications.
  • Run the installation package, following all instructions to install your new firmware version.

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows XP SP3

선결 조건

  • Information Not Available

지원되는 계측기

  • 86100D

다운로드 방법

  • Download the firmware upgrade file to the target PC or to a USB flash drive or LAN folder that will be available to the target PC.
     

설치 방법

  • Run installation package on the target PC , following all instructions to install your new firmware version.
     

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 8
  • Windows 7
  • Windows Vista

선결 조건

  • 64-bit Windows OS as noted above

지원되는 계측기

  • 86100C, 86100D

다운로드 방법

  • Download the firmware upgrade file to the target PC or to a USB flash drive or LAN folder that will be available to the target PC.
     

설치 방법

  • Run installation package on the target PC , following all instructions to install your new firmware version.
     

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows XP SP3

선결 조건

  • None

지원되는 계측기

  • 86100C 86100D

다운로드 방법

  • Download the firmware uprade file to the target PC or to a USB flash drive or LAN folder that will be available to the target PC.

설치 방법

  • Run the installation package on the target PC and run the installation package, following all instructions to install your new firmware version.

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows XP SP3

선결 조건

  • None

지원되는 계측기

  • 86100C, 86100D

다운로드 방법

  • Copy the firmware uprade file to a USB flash drive or LAN folder that will be available to the target PC.

설치 방법

  • Copy the upgrade file to the target PC and run the installation package, following all instructions to install your new firmware version.

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows XP SP3

선결 조건

  • 86100C or 86100D mainframe running the latest version of firmware.

지원되는 계측기

  • 86100C, 86100D

다운로드 방법

  • Click the 'Download' button and save or transfer the installation file to target PC.

설치 방법

  • Run the executable installation file and follow all instructions to install on the target PC

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows XP SP3

선결 조건

  • None

지원되는 계측기

  • PC

다운로드 방법

  • See Above
     

설치 방법

  • See Above

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows XP SP3

선결 조건

  • Information Not Available

지원되는 계측기

  • N1010A

다운로드 방법

  • Information Not Available

설치 방법

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows XP

선결 조건

  • See Above

지원되는 계측기

  • 86100C, 86100D

관련링크

다운로드 방법

  • Information Not Available

설치 방법

라이센스

  • Does Not Require a License

지원 문서

Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows Vista
  • Windows XP

선결 조건

  • See Above

지원되는 계측기

  • 86100C DCA J and 86100D DCA X oscilloscopes

관련링크

다운로드 방법

  • Information Not Available

설치 방법

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows Vista
  • Windows XP

선결 조건

  • See Above

지원되는 계측기

  • 86100C DCA J and 86100D DCA X oscilloscopes

관련링크

다운로드 방법

  • Information Not Available

설치 방법

  • See Above

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows Vista
  • Windows XP

선결 조건

  • See Above

지원되는 계측기

  • 86100C, 86100D

관련링크

다운로드 방법

  • Information Not Available

설치 방법

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows Vista
  • Windows XP

선결 조건

  • Information Not Available

관련링크

다운로드 방법

  • Information Not Available

설치 방법

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows Vista
  • Windows XP

선결 조건

  • See Above

지원되는 계측기

  • 86100C DCA J and 86100D DCA X oscilloscopes

관련링크

다운로드 방법

  • Information Not Available

설치 방법

라이센스

  • Does Not Require a License
Download

Installs on: PC / Instrument

운영 체제

  • Windows 7
  • Windows Vista
  • Windows XP

선결 조건

  • Information Not Available

관련링크

SHOW MORE