聯絡是德專家

技術支援

電子量測

依產品型號搜尋: 例如: 34401A, E4440A

1-25 / 51

排序:
Signal Analyzer IVI and MATLAB Instrument Drivers
Supported models: N9000A, N9010A, N9020A, N9030A, N9038A, E4406A, E4440A, E4443A, E4445A, E4446A, E4448A, N8201A, E4447A, E4401B, E4402B, E4403B, E4404B, E4405B, E4407B, E4408B, E4411B, E7401A, E7402A, E7403A, E7404A, E7405A, M9290A, N9040B

FAQ 2014-11-21

How can I get correct Log Frequency Scale Trace Data Using IntuiLink or BenchVue with my ESA Series Spectrum Analyzer?
Save the trace as a .csv file

FAQ 2014-03-13

What is included with Option UK6?
Beginning December 19, 2013, the list below describes what will be included with Option UK6:

FAQ 2014-02-27

What is the RF Test Blog?
RF engineers know that making good measurements is a challenge. The RF Test Blog was created as a resource for RF engineers to find ways to make better RF measurements.

FAQ 2013-12-17

What calibrations are available on X-Series, PSA, ESA analyzers and X-Series, ESG-C, PSG Signal Generators at time of initial sale from the factory?
Details regarding time of sale calibrations can be found here...

FAQ 2013-10-15

How do I use the Service Request method (SRQ) to determine if the X-Series, ESA and PSA Signal Analyzers measurement is complete or has an error me...
Click here for information on the Service Request query to determine when a measurement is complete.

FAQ 2013-06-25

我在哪裡可以找到過時的HP測試儀器的使用手冊?
有一些公司可能還會提供這些使用手冊…

FAQ 2013-05-29

How do I remotely program my spectrum or vector signal analyzer?
Instructions, examples, and references for remotely programming your spectrum analyzer

FAQ 2013-05-16

何謂頻譜分析儀?
「何謂頻譜分析儀?」問與答。

FAQ 2013-03-28

How do I upgrade my ESA-L Series Spectrum Analyzer?
Find information on Hardware Options, Measurement Personalities, Connectivity Methods, Firmware Upgrades, etc...

FAQ 2013-02-07

For my Spectrum Analyzer, where can I find a conversion guide between IVI-COM and SCPI?
The linked spreadsheet provides a mapping between IVI-COM and SCPI

FAQ 2012-05-26

如何使用VEE從遠端設定ESA、EMC或PSA系列頻譜分析儀,以便將螢幕影像轉移到PC上的檔案?
請參考內文以取得詳細資訊....

FAQ 2012-03-16

How do I erase/clear the user data in an ESA or EMC series spectrum analyzer for security reasons?
Follow this link for further information....

FAQ 2012-03-16

What type of cabinets can the ESA Rackmount Kit (Option 1CP) be installed into?
The ESA Rackmount Kit (Option 1CP) was designed to mount into an System II Rack.

FAQ 2012-03-16

What is the correct cable to use with the ESA Series for RS-232 communication?
Part number RS232-61601

FAQ 2012-02-25

信號產生器與頻譜分析儀韌體 / 軟體更新中心
同時獲得所有最新的更新...

FAQ 2012-02-24

Why is there a "chirping" noise coming out of my ESA Series Spectrum Analyzer?
This is caused by the alignment routine and is normal.

FAQ 2012-01-24

Is a viewing hood available for the ESA Series Spectrum Analyzer?
No, the display which is used in the ESA has a large viewing angle and the contrast can be adjusted to compensate for direct sunlight.

FAQ 2012-01-11

如何找到是德產品的配件?
如需特殊儀器配件(例如示波器用測試探棒),請先到產品網頁,然後查看相關的配件。

FAQ 2011-10-07

Can I convert my 1.5 GHz ESA Spectrum Analyzer input impedance from 50-ohm to 75-ohm or vice versa from 75-ohms to 50-ohms?
Keysight does not supply a specific upgrade kit to change the input impedance of the Spectrum Analyzer. It is not a simple connector change, rather an entire R.F. assembly, model ID label, and connector label.

FAQ 2010-10-01

Why is the marker Count Accuracy on the on the ESA Series Spectrum Analyzer only specified when using resolution bandwidths >1KHz?
If more that one signal is present in the 1kHz span, the marker count will be incorrect.

FAQ 2010-09-08

In the ESA Series, how can I save the results of a Channel Power, ACP, OBW, Emission Bandwidth, or Harmonic Distortion measurement?
Save a screen image to the floppy disk drive.

FAQ 2010-06-14

I've upgraded my ESA with option 1DR, Narrow Resolution Bandwidths, yet the instrument will not go below a 1 kHz bandwidth. Why is this?
If the option and license key were entered correctly, the analyzer defaults file may be corrupt. This can be repaired using a remote SCPI command.

FAQ 2010-06-14

How do I remotely program my Keysight X-Series, ESA/PSA Series Signal Analyzer to transfer binary block trace data in Visual Basic 6?
Click here for information on transfering binary block trace data.

FAQ 2009-11-11

How do I remotely program my X-Series, ESA, PSA Signal Analyzer to Transfer Trace data using VEE?
The attached program demonstrates how to transfer trace in in several formats including ASCII, REAL and Integer.

FAQ 2009-11-11

1 2 3 下一頁