Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Technical Support

Electronic Measurement

Support by Product Model Number:

126-150 of 189

Sort:
VXIplug&play Driver: Set an Arbitrary Waveform using Keysight VEE Pro (Read Me)
Code sample documentation.

Programming Example 2003-09-01

VISA: Send a Pulse to the 33220A Using Binary Data (Read Me)
Code sample documentation.

Programming Example 2003-09-01

VISA: AM Modulation and Storing Instrument State (Read Me)
Code sample documentation.

Programming Example 2003-09-01

VXIplug&play Driver: Basic Waveform Functions on an Arb (Read Me)
Code sample documentation.

Programming Example 2003-09-01

VISA: FM Modulation and How to Store and Recall an Instrument Setup
This sample program demonstrates how to program the instrument for FM modulation and demonstrates how to store and recall an instrument setup.

Programming Example 2003-09-01

VISA: Send a Pulse with Variable Rise and Fall Times to 33220A
This sample program uses the 3494A ActiveX instrument Control to send SCPI commands to the Waveform Generator. The data creates a pulse with variable rise and fall times.

Programming Example 2003-09-01

VISA: FM Modulation and How to Store and Recall an Instrument Setup (Read Me)
Code sample documentation.

Programming Example 2003-09-01

VISA: Send a Pulse with Variable Rise and Fall Times to 33220A (Read Me)
Code sample documentation.

Programming Example 2003-09-01

VISA: Sample Waveform Data
This sample program contains sample waveform data stored as comma separated variables.

Programming Example 2003-09-01

VISA: Sample Waveform Data (Read Me)
Code sample documentation.

Programming Example 2003-09-01

Programming USB Instruments: Arbitrary Waveform Code Sample
This code sample shows how to use USB and VISA to download an arbitrary waveform to the Keysight 33220A.

Programming Example 2003-05-01

Programming USB Instruments: Frequency Sweep Code Sample (Read Me)
Code sample documentation.

Programming Example 2003-05-01

Programming USB Instruments: Arbitrary Waveform Code Sample (Read Me)
Code sample documentation.

Programming Example 2003-05-01

Programming USB Instruments: Frequency Sweep Code Sample
This code sample shows how to use Visual Basic .NET and USB to program the Keysight 33220A to execute a frequency sweep.

Programming Example 2003-05-01

Programming USB Instruments: Frequency Sweep Code Sample (Read Me)
Code sample documentation.

Programming Example 2003-05-01

66000 MPS Example Programs
Contains the seven Microsoft® Visual Basic 6.0 example programs described in the 66000 MPS Product Note, also includes HP BASIC program examples.

Programming Example 2003-04-28

VISA COM and IVI-COM Driver: 33220 Square Burst (Read Me)
Code sample documentation.

Programming Example 2003-03-01

VISA COM and IVI-COM Driver: 33220 Haversine (Read Me)
Code sample documentation.

Programming Example 2003-03-01

VISA COM: 33120 FM
Demonstrates how to program the instrument for FM modulation and demonstrates how to store and recall an instrument setup.

Programming Example 2003-03-01

VISA COM and IVI-COM Driver: 33220 Square Burst
This program sets up a triggered burst that outputs three cycles of a square wave upon receipt of each trigger.

Programming Example 2003-03-01

VISA COM and IVI-COM Driver: 33250 AM Waveform and State Storage
This program uses low-level SCPI commands to configure the function generator to output an AM waveform and also shows how to use state storage to store the instrument configuration in memory.

Programming Example 2003-03-01

VISA COM and IVI-COM Driver: 33220 Haversine
This program sets up a burst waveform with a 270 degree starting phase. By adding an offset voltage to the burst, a haversine is created. This program also shows the use of a trigger received over the GPIB interface to initiate a single trigger.

Programming Example 2003-03-01

VISA COM and IVI-COM Driver: 33250 Pulse Waveshape
This program sets up a pulse waveshape and adjusts the edge time. It also shows the use of high and low voltage levels and period. The edge time is adjusted by 10 nsec increments.

Programming Example 2003-03-01

SICL: *IDN? and Device Info Query on a USB Device
This program opens a communication session with a USB device, does a *IDN? query of the device and gets and displays some device information.

Programming Example 2003-03-01

VISA COM and IVI-COM Driver: 33250 Linear Sweep (Read Me)
Code sample documentation.

Programming Example 2003-03-01

Previous 1 2 3 4 5 6 7 8 Next