Contact an Expert

Technical Support

Electronic Measurement

Find by Product Model Number: Examples: 34401A, E4440A

Refine the List

remove all refinements

By Industry/Technology

By Type of Content

1-25 of 1081

Sort:
Preamplifiers and System Noise Figure
Learn how to reduce the noise figure of RF & MW test systems using a low noise amplifier

Application Note 2014-11-07

Materials Measurement: Soil Materials - Application Brief
Soil materials such as rocks or clay also have electrical properties in addition to the mechanical properties as with other substances.

Application Note 2014-11-05

PDF PDF 925 KB
Method of Implementation (MOI) for HEAC Cable Assembly Test
Method of Implementation (MOI) for HEAC Cable Assembly Test Using Keysight E5071C ENA Network Analyzer Option TDR.

Application Note 2014-10-20

PDF PDF 1.93 MB
Impedance Matching in the Laboratory - Application Note
Impedance Matching in the Laboratory University Engineering Lab Series - Lab 4

Application Note 2014-10-17

PDF PDF 501 KB
Debug Automotive Designs Faster with CAN-dbc Symbolic Trigger and Decode - Application Note
Learn about CAN-dbc symbolic triggering and how to improve debug of your automotive designs using an oscilloscope.

Application Note 2014-10-12

Drive Down the Cost of Test Using the ENA Series of Network Analyzers - Application Note
In this application note, we discuss the contributions of Keysight Technologies, Inc.’s ENA Series of Vector Network Analyzers (ENA, hereafter) to drive down the cost of test in production lines.

Application Note 2014-10-11

PDF PDF 731 KB
Precise Evaluation of Input,Output, and Reverse Transfer Capacitances of Power Devices - White Paper
Accurate characterization of power device capacitance parameter becomes important for power circuit design. This paper introduces a solution to characterize Ciss, Coss, Crss and Rg automatically.

Application Note 2014-10-10

PDF PDF 2.49 MB
Method of Implementation(MOI) for MIPI D-PHY Interface S-Parameter and Impedance Conformance Tests
Keysight Method of Implementation (MOI) for MIPI D-PHY Interface S-Parameter and Impedance Conformance Tests Using Keysight E5071C ENA Network Analyzer Option TDR

Application Note 2014-10-10

PDF PDF 1.07 MB
Transmission Lines and Reflected Signals - Application Note
Transmission Lines and Reflected Signals University Engineering Lab Series - Lab 3

Application Note 2014-10-09

PDF PDF 596 KB
A Modern Approach to Signal Identification and Pulse Measurements - Application Note
This application note provides an overview of signal-identification techniques for monitoring electronic warfare (EW) scenarios and outlines several analysis options that support typical requirements in dynamic range and bandwidth.

Application Note 2014-10-02

Measuring High Impedance Sources Using the U8903B Audio Analyzer - Application Note
Considerations for measuring high impedance sources. A method of using an impedance matching attenuator to overcome high impedance measurement problems is described. Methods for aligning matching attenuator and compensating for its loss are shown alongside the ease with which frequency response measurements can be made.

Application Note 2014-09-30

PDF PDF 937 KB
Keysight Method of Implementation (MOI) for USB2.0 Cable-Connector Assembly Compliance Test
Keysight Method of Implementation (MOI) for USB2.0 Cable-Connector Assembly Compliance Test Using Keysight E5071C ENA Network Analyzer Option TDR

Application Note 2014-09-24

PDF PDF 2.34 MB
Making Fast Pass/Fail Testing with Keysight N9320B Spectrum Analyzer - Application Note
This application note describes the advanced window limit feature in the N9320B spectrum analyzer and demonstrates how to use it to easily make the Pass/Fail determination on measurement results.

Application Note 2014-09-08

PDF PDF 1.55 MB
Keysight Technologies Method of Implementation (MOI) for BroadR-Reach Link Segment Test
Keysight Technologies Method of Implementation (MOI) for BroadR-Reach Link Segment Test Using ENA Option TDR

Application Note 2014-08-28

PDF PDF 1.99 MB
Materials Measurement: PCB Materials - Application Brief
This application brief provides the solutions for measuring PCB materials.

Application Note 2014-08-27

Radar Measurements - Application Note
This application note focuses on the fundamentals of measuring basic pulsed radars and measurements for more complex or modulated pulsed radar systems.

Application Note 2014-08-22

PDF PDF 6.84 MB
Materials Measurement: Liquid Materials - Application Brief
This application brief provides the solutions for measuring dielectric properties of liquid materials.

Application Note 2014-08-04

PDF PDF 1.24 MB
Spectrum Analysis and the Frequency Domain - Application Note
Spectrum Analysis and the Frequency Domain University Engineering Lab Series - Lab 2

Application Note 2014-08-04

PDF PDF 280 KB
Using Fine Resolution to Improve Thermal Images - Application Note
Fine Resolution effectively quadruples the resolution of the 160 x 120 pixels to 320 x 240 pixels. Fine Resolution is created through - multi-frame acquisition, super-position and reconstruction.

Application Note 2014-08-04

PDF PDF 645 KB
Low-Cost DDR3 Decode and Analysis with the 16850 Series Portable Logic Analyzers - Application Note
See how to make low-cost measurements on DDR3 interfaces and conduct performance analysis/compliance tests to evaluate the memory systems during debug and validation of a digital prototype.

Application Note 2014-08-04

PDF PDF 2.52 MB
Power-Consumption Measurements for LTE User Equipment - Application Note
This application note focuses on determining how certain parameters affect a specific smartphone's power consumption and figure out how to adjust the parameters to improve battery life.

Application Note 2014-08-04

PDF PDF 360 KB
Understanding and Applying Probability of Intercept In Real-Time Spectrum Analysis- Application Note
This document describes six major factors that determine the POI value and relative amplitude: sampling rate, time-record length, windowing function, window size, overlap processing, and noise floor.

Application Note 2014-08-04

PDF PDF 2.53 MB
Evaluating Oscilloscope Sample Rates vs. Sampling Fidelity - Application Note
Make the most accurate digital measurements by learning how to evaluate oscilloscope sample rates vs. signal fidelity.

Application Note 2014-08-04

Enhancing Measurement Performance for the Testing of Wideband MIMO Signals - White Paper
This white paper describes a method for characterization and correction of channel frequency response for BBIQ measurements over large bandwidths when using the Keysight M9703A and 89600 VSA software.

Application Note 2014-08-03

PDF PDF 1.47 MB
Optimizing On-Wafer Noise Figure Measurements up to 67 GHz - Application Note
Shows a cold-source solution based on the Keysight PNA-X microwave network analyzer. When equipped with the optional source-corrected NF measurements (Option 029), the PNA-X provides accuracy.

Application Note 2014-08-03

1 2 3 4 5 6 7 8 9 10 ... Next