Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Basics & Measurement Fundamentals

Refine the List

By Industry/Technology

By Type of Content

By Product Category

101-125 of 282

Sort:
Ground Bounce Basics and Best Practices 
This article offers a description of the physical properties that result in ground bounce during board test.

Application Note 2003-01-28

PDF PDF 138 KB
Handling Surface Mapping with Varying Board Construction 
This paper describes a method for dealing with lot-to-lot or supplier-to-supplier variations in board construction. Often the variations in board construction result in different color boards which otherwise cause problems with surface mapping.

Application Note 2004-12-02

PDF PDF 1.02 MB
How Senior Managers Perceive the Importance of Calibration - White Paper 
This paper, presented at the National Conference of Standards Laboratories International July 2013, discusses the importance of measurement accuracy and the financial impact it can have on the bottom line.

Application Note 2013-07-01

PDF PDF 1.78 MB
How To Float, or Series, Keysight 3070 DUT Supplies 
The Keysight 3070 development software does an amazing job of calculating the wiring needed to build fixtures. Even so there are occasionally cases which require wiring that the standard Keysight 3070 software can not handle.

Application Note 1997-01-23

PDF PDF 34 KB
How to Get the Most from Keysight's Intelligent Yield Enhancement Test (IYET) 
This paper describes how to get the most from IYET for Keysight board test systems.

Application Note 2005-07-15

 
How to Use IVI-COM Drivers in Keysight VEE Pro 8.0 
This paper describe how easy to use IVI-COM driver in Keysight VEE Pro that allows instruments interchangeability while still providing quality and high performance.

Application Note 2007-06-08

PDF PDF 295 KB
How to use the Keysight 81200 together with Keysight VEE - Application Note 
This attached Product Note shows how to use the Keysight 81200 Data Generator/Analyzer together with Keysight VEE for Signal Integrity Analysis.

Application Note 2002-01-28

PDF PDF 383 KB
How to use the Keysight N6700 Modular Power System to replace a Keysight 662xA (AN 1467)  
This is a high-level overview to help current 662xA owners easily convert to a Keysight N6700.

Application Note 2004-08-02

How to Use VXI and PXI in Your New LXI Test System (AN 1465-23) 

Application Note 2006-06-06

Hybrid32 Migration 
This document is provided to help users of HybridPlus Pin Cards more easily incorporate the Hybrid32 technology into their existing systems.

Application Note 2000-11-01

PDF PDF 61 KB
IEEE 1149.6 Standard Boundary Scan Testing on Keysight Medalist i3070 ICT Systems 
This paper introduces the latest advancements in Boundary Scan test capabilities on the Keysight Medalist i3070 In-Circuit Test platform that supports the testing of IEEE 1149.6-compliant devices.

Application Note 2008-11-24

PDF PDF 297 KB
Impedance Matching Techniques for Mixers and Detectors (AN 963) 
This Application Note is for information only. Keysight no longer sells or supports these products.

Application Note 1980-08-01

PDF PDF 108 KB
Improved Fault Coverage in a Combined X-ray and In-Circuit Test Environment 
Cutting functional test failures in half and doubling the faults detected at process test! These are some of the case study results observed in combined X-ray and in-circuit test environments.

Application Note 2001-02-27

PDF PDF 575 KB
Improved Throughput in Network Analyzer Applications (AN 1287-5) 
This Application Note explores a variety of throughput issues and how they might affect different applications. It suggests ways to improve network analyzer performance for better throughput in specific situations, and how to get an accurate picture of how an analyzer's performance might impact...

Application Note 2010-03-15

Improving Meas. and Calibration Accuracy using the Frequency Converter (1408-3) – Application Note 
Improving Measurement and Calibration Accuracy Using the Frequency Converter Application - AN 1408-3

Application Note 2006-08-08

Improving Network Analyzer Measurements of Frequency-translating Devices (1287-7) – Application Note 
This Application Note explores current test equipment solutions and techniques that can be used to accurately characterize and test frequency-translating devices.

Application Note 2000-03-01

In-circuit Testing of Low Voltage Devices 
Core technical document summarizing issues regarding the testing of low voltage devices on the 3070 and i5000, including updated Safeguard information.

Application Note 2005-05-25

PDF PDF 172 KB
In-System Programming on the Keysight 3070 
In-System Programmable devices are more widely used on today's boards to provide flexibility to design engineers and to reduce the cost of a product.

Application Note 2001-07-02

PDF PDF 205 KB
Instrument Design Validation and Recommended Calibration Policy - Application Note 
Provides background information on the test philosophies and methods used when developing instrument verification and adjustment procedures.

Application Note 2015-05-07

Introduction to Test-System Design (AN 1465-1) 

Application Note 2005-01-20

ISDN Testing Techniques (AN 397-1) 
This Application Note is for information only. Keysight no longer sells or supports these products.

Application Note 1990-09-01

PDF PDF 1.67 MB
Isolating Frequency Measurement Error and Sourcing Frequency by Robert Leiby 
When performing a calibration, the risk of incorrectly declaring a device as in-tolerance (false-accept risk) is dependent upon several factors such as the specified tolerance limit and guard band.

Application Note 2015-04-27

PDF PDF 3.09 MB
Jitter Analysis Techniques for High Data Rates (AN 1432) - Application Note 
This new application note describes the basic jitter measurements and the specific measurement techniques used in SONet/SDH/OTN and Gigabit Ethernet applications.

Application Note 2003-02-03

Jitter Fundamentals: Jitter Tolerance Testing with Keysight ParBERT 81250 - Application Note 
This applicaiton note describes gain fast and efficient insight into the operation and performance of CDR, clock system and jitter tolerance.

Application Note 2003-12-02

PDF PDF 3.18 MB
Keysight 3070 Now Powered by Industrial PC Controllers 
The Keysight 3070 is now controlled by PCs similar to others used in your production and office environment lowering system administration and learning costs.

Application Note 2003-01-23

PDF PDF 207 KB

Previous 1 2 3 4 5 6 7 8 9 10 ... Next