Contact an Expert

Design Verification and Pre-Conformance WiMAX™ Test Equipment

Once your design is complete, you need to ensure it conforms to the 802.16-2004, 802.16e-2005 and 802.16Rev2 standards. Keysight offers preconformance and design-validation test systems built around our test tools. Keysight’s test solutions let you check your new products against RF PHY requirements called for in the WiMAX Forum’s RCT documents and IEEE 802.16 specifications. So you can determine if your product will be allowed to operate in the defined geographic region. In addition, you will improve your interoperability with other WiMAX certified equipment.

1-14 of 14

Sort:
N9075A & W9075A 802.16 OFDMA X-Series Measurement Application - Technical Overview 
The Mobile WiMAX measurement application transforms the X-Series signal analyzers into standard-based Mobile WiMAX transmitter testers by adding fast 1-button power and modulation measurements.

Technical Overview 2014-05-21

Wave 2 Mobile WiMax™ Measurements 89600 Vector Signal Analysis Software 
This demonstration guide provides step by step instructions for making Wave 2 Mobile WiMax™ measurements using the 89600 VSA software.

Demo 2011-03-05

PDF PDF 1.25 MB
WiMAX (IEEE 802.16-2004) 89600 VSA Software 
This demonstration guide provides step by step instructions for making RF measurements on WiMAX signals using the 89600 VSA software.

Demo 2011-02-28

IEEE 802.16e WiMAX OFDMA Signal Measurements and Troubleshooting, AN 1578 
This note provides a broad overview of measurement and troubleshooting approaches for OFDMA signals, and is not limited to digital demodulation or modulation quality analysis.

Application Note 2011-02-17

Using X-Series Signal Analyzers for Measuring and Troubleshooting Digitally Modulated Signals 
Signal analysis in digital modulation applications takes many forms, ranging from straight forward spectrum analysis of CW oscillators to demodulation and modulation quality analysis in R&D to simple go/no-go final tests in manufacturing.

Application Note 2009-09-02

89600 VSA Software Mobile WiMAX™ and Fixed WiMAX 
This two page flyer describes the 89600 Series vector signal analysis software WiMAX. Option B7Y OFDMA (mobile WiMAX) and Option B7S OFDM (fixed WiMAX). These options provide modulation analysis for WiMAX PHY layer signal problems.

Promotional Materials 2009-06-10

PDF PDF 155 KB
N9074A Single Acquisition Combined Fixed WiMAX X-Series Measurement Application Technical Overview 
The N9074A Single Acquisition Combined Fixed WiMAX X-Series measurement application. For use in the X-Series signal analyzers (MXA/EXA)

Technical Overview 2009-03-23

PDF PDF 770 KB
Mobile WiMAX™ PHY Layer (RF) Operation and Measurement 
This application note describes the operation and physical layer measurements of 802.16e OFDMA Mobile WiMAX devices.

Application Note 2008-07-17

PDF PDF 7.84 MB
Optimizing Speed for WiMAX Measurements 
Application note describing the settings and recommendations to optimize the throughput for making Mobile WiMAX™ measurements using the MXA signal analyzer N9020A and N9075A 802.16 OFDMA measurement application.

Application Note 2007-10-01

PDF PDF 129 KB
Setup files for 802.16 OFDMA signal generation and analysis 
Eight matching set-up files for Signal Studio 802.16 OFDMA (N7613A) and 89600 VSA Software with IEEE-802.16e OFDMA modulation analysis (Option B7Y).

Demo 2005-08-24

 
WiMAX Signal Analysis Part 3: Troubleshooting Symbols and Improving Demodulation 
This application note is the third in a 3-part series that presents an approach to WiMAX (802.16-2004) signal analysis that yields the greatest level of understanding and reliability in measurements.

Application Note 2005-07-26

PDF PDF 439 KB
WiMAX Signal Analysis Part 2: Demodulating and Troubleshooting the Subframe Application Note 
This application note is the second in a 3-part series that presents an approach to WiMAX (802.16-2004) signal analysis that yields the greatest level of understanding and reliability in measurements.

Application Note 2005-07-05

PDF PDF 848 KB
WiMAX Signal Analysis Part 1: Making Frequency and Time Measurements Application Note 
This application note is the first in a 3-part series that presents an approach to WiMAX (802.16-2004) signal analysis that yields the greatest level of understanding and reliability in measurements.

Application Note 2005-07-05

PDF PDF 714 KB
WiMAX Concepts and RF Measurements 
This application note reviews the RF characteristics of the 256 carrier OFDM air interface defined in 802.16-2004 and the RF parametric tests that can be performed with Keysight test solutions.

Application Note 2005-01-05