Here’s the page we think you wanted. See search results instead:

 

Contact an Expert

Momentum 3D Planar EM Simulator

Momentum is the leading 3D planar electromagnetic (EM) simulator used for passive circuit modeling and analysis. It accepts arbitrary design geometries (including multi-layer structures) and uses frequency-domain Method of Moments (MoM) technology to accurately simulate complex EM effects including coupling and parasitics. Accurate EM simulation enables RF/MMIC designers, RF/High-Speed Board Designers, RF Module/SiP Designers and Antenna Designers to improve design performance and increase confidence that the manufactured product will meet spec. Momentum is also integrated with ADS and Genesys, along with third party tools from Cadence, Mentor and Zuken.

Key Benefits of Momentum

  • Combines full-wave and quasi-static EM solvers for RF passives, high-frequency interconnects and parasitic modeling
  • Efficient meshing, adaptive frequency sampling and threaded NlogN solver which reduces simulation time
  • Able to simulate complex EM effects including skin effect, substrate effect, thick metals and multiple dielectrics

Learn about Momentum

1-25 of 70

Sort:
Advanced Design System - Brochure
This Brochure highlights the features of Keysight EEsof EDA's Advanced Design System (ADS); the industry's premier RF, Microwave and High-Speed Design platform.

Brochure 2017-07-28

PDF PDF 2.49 MB
How to Estimate Voltage Spikes from Layout Parasitic Inductance in Switched-Mode Power Supplies
We showed you how to deal with layout parasitic inductance in our previous video entitled “How to design DC-to-DC power converters”, but a frequently asked question was “When should I start to worry about layout parasitics inductance? Is there a quick rule of thumb that says kind of ‘Caution: Further investigation’s needed?’” The answer is yes and this follow up video is about how to make these estimates.

How-To Video 2017-07-17

STMicroelectronics & ESEO Use ADS To Design a 2.45 GHz Wireless Power Scavenging Circuit
Learn how STMicroelectronics and ESEO designed a 2.45 GHz wireless scavenging circuit using Advanced Design System (ADS).

Case Study 2017-06-07

PDF PDF 539 KB
Keysight EEsof EDA Premier Communications Design Software
Keysight EEsof EDA premier communications design software product overview brochure.

Brochure 2017-01-24

PDF PDF 2.54 MB
Unlocking Millimeter Wave Insights
It is easy to underestimate the challenges at millimeter-wave frequencies, and this amplifies the importance of integrated tools for design, simulation, measurement, and analysis. Learn more about how Keysight is taking the mystique out of millimeter waves and unlocking new insights.

Demo 2016-09-30

How to Design Custom RF, Microwave and Analog Filters
This video shows a custom filter design technique based on Direct or Exact Synthesis in which the filter response is first shaped and customized to meet specifications before a suitable topology is extracted and transformed for the most economical realization.

How-To Video 2016-09-01

How to Eliminate Layout Induced Oscillations
This video describes how to predict and ultimately eliminate layout induced oscillation using electromagnetic analysis.

How-To Video 2016-06-14

Solving Electronics Design Challenges of an Aerospace System with EDA Tools
Microwave Product Digest featured article on solving electronics design challenges of an aerospace system using EDA tools.

Article 2016-03-22

Keysight Technologies Announces ADS 2016, its Latest Advanced Design System Software Release
Keysight introduces the latest release of its powerful Advanced Design System (ADS) software, ADS 2016.

Press Materials 2016-02-04

TowerJazz Announces New Interoperable PDK for ADS on TPSCo's Advanced 65nm RF CMOS Platform
TowerJazz's new interoperable PDK targets various applications such as WiFi, Transmitters/Receivers (Tx/Rx), cell phones, tuners, and automotive radar, among others.

Press Materials 2015-12-23

Minimizing Design Risk, Shortening Development Time of a Digital Transmission System
Powerful design and simulation software provides valuable insights to help uncover and solve difficult design challenges at every stage of the design process.

Case Study 2015-12-15

PDF PDF 1.17 MB
Keysight EEsof EDA makes it easy to get back to school—at least virtually
Rick Nelson, executive editor of Evaluation Engineering, visited Keysight Technologies and had this to say about Keysight EEsof EDA.

Article 2015-09-11

How to Design DC-to-DC Converters
This video introduces basic DC-to-DC converter operation, explains why voltage spikes occur in these circuits, and shows the importance of modeling PC board layout effects. There is an example in which current visualization is used to see potential problem areas in the PC board. The layout is then modified to improve performance.

How-To Video 2015-08-24

Keysight Technologies' University Educational Support Programs Now in More Than 200 Universities
Keysight announces that more than 200 universities in North America are now participating in the Keysight EEsof EDA University Educational Support Programs, which provide several thousand students with EDA software licenses.

Press Materials 2015-08-20

IMS 2015 Demos from Keysight EEsof EDA
YouTube video playlist containing International Microwave Symposium (IMS) 2015 demo videos from Keysight EEsof EDA MicroApps.

Demo 2015-06-19

Asygn & Kalray use Keysight Simulation Tool Suite to Validate PCI Express® Gen3 Serial Links
Keysight Technologies announces it will exhibit its PCI Express® (PCIe®) solutions at the PCI-SIG Developers Conference 2015, Booth 7, Santa Clara Convention Center, June 23-24.

Press Materials 2015-06-19

Technical Support Documents & Examples
A database of technical support documents, solutions, and examples written by support engineers.

Reference Guide 2015-03-20

How to Predict Package and Bondwire Effects on Your RF-Module Designs
This short video shows how to predict package, board, and bond wire effects on your RF-module designs which subsequently enables you to fix the design prior going to fabrication. The video demonstrates the process of building modules that comprise different technologies and performing EM simulation on them.

How-To Video 2015-02-19

Recommendations for Port Setup When Using ADS Momentum and Modelithics Models
This application note is intended to help Advanced Design System (ADS) users using Modelithics models, simulate RF & Microwave circuits. The focus is on finding the optimum port setup for EM simulation of circuit layouts that include surface-mount technology (SMT) devices.

Application Note 2015-02-05

PDF PDF 1.43 MB
How to Apply EM Port Calibration to Improve Simulation Accuracy (MoM)
This video covers 5 different Momentum calibration methods and shows how the different types of calibration methods impact simulation results along with where and how to use them properly.

How-To Video 2015-01-15

How to Optimize the Performance of Your RF Layout
This video shows a practical and effective approach to optimize the performance of your RF layout by parameterizing it and performing EM optimization prior to going to fabrication – thus helping to achieve fist pass success.

How-To Video 2015-01-14

Keysight Silicon RFIC Design Solutions
In this video we show the Keysight Silicon RFIC design solutions that help you achieve your goals for designing today´s challenging RFICs and successfully going beyond the IC to verify its performance in higher levels of integration.

Demo 2015-01-05

Keysight EEsof EDA Momentum
Momentum is the leading 3D planar electromagnetic (EM) simulator from Keysight EEsof EDA.

Brochure 2014-12-30

PDF PDF 547 KB
Keysight EEsof EDA Documentation
Keysight EEsof EDA Product Documentation.

Reference Guide 2014-12-08

An Innovative Simulation Workflow for Debugging High-Speed Digital Designs Using Jitter Separation
This paper presents a new simulation workflow for jitter separation analysis.

Application Note 2014-08-03

1 2 3 Next

Related Industries & Technologies